pl2303.c

基于S3CEB2410平台LINUX操作系统下 USB驱动源代码

		port->active = 1;

#define FISH(a,b,c,d)									\
		result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0),	\
				       b, a, c, d, buf, 1, 100);			\
		dbg("0x%x:0x%x:0x%x:0x%x  %d - %x",a,b,c,d,result,buf[0]);

#define SOUP(a,b,c,d)									\
		result=usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev,0),	\
				       b, a, c, d, NULL, 0, 100);			\
		dbg("0x%x:0x%x:0x%x:0x%x  %d",a,b,c,d,result);

		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 0);
		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1);
		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
		FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1);
		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0xc0);
		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 4);

		/* Setup termios */
		*(port->tty->termios) = tty_std_termios;
		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;

		pl2303_set_termios (port, &tmp_termios);

		//FIXME: need to assert RTS and DTR if CRTSCTS off

		dbg (__FUNCTION__ " - submitting read urb");
		port->read_urb->dev = serial->dev;
		result = usb_submit_urb (port->read_urb);
		if (result) {
			err(__FUNCTION__ " - failed submitting read urb, error %d", result);
			up (&port->sem);
			pl2303_close (port, NULL);
			return -EPROTO;
		}

		dbg (__FUNCTION__ " - submitting interrupt urb");
		port->interrupt_in_urb->dev = serial->dev;
		result = usb_submit_urb (port->interrupt_in_urb);
		if (result) {
			err(__FUNCTION__ " - failed submitting interrupt urb, error %d", result);
			up (&port->sem);
			pl2303_close (port, NULL);
			return -EPROTO;
		}
	}
	up (&port->sem);
	return 0;
}


static void pl2303_close (struct usb_serial_port *port, struct file *filp)
{
	struct usb_serial *serial;
	struct pl2303_private *priv;
	unsigned int c_cflag;
	int result;

	if (port_paranoia_check (port, __FUNCTION__))
		return;
	serial = get_usb_serial (port, __FUNCTION__);
	if (!serial)
		return;
	
	dbg (__FUNCTION__ " - port %d", port->number);

	down (&port->sem);

	--port->open_count;
	if (port->open_count <= 0) {
		if (serial->dev) {
			c_cflag = port->tty->termios->c_cflag;
			if (c_cflag & HUPCL) {
				/* drop DTR and RTS */
				priv = port->private;
				priv->line_control = 0;
				set_control_lines (port->serial->dev,
						   priv->line_control);
			}

			/* shutdown our urbs */
			dbg (__FUNCTION__ " - shutting down urbs");
			result = usb_unlink_urb (port->write_urb);
			if (result)
				dbg (__FUNCTION__ " - usb_unlink_urb "
				     "(write_urb) failed with reason: %d",
				     result);

			result = usb_unlink_urb (port->read_urb);
			if (result)
				dbg (__FUNCTION__ " - usb_unlink_urb "
				     "(read_urb) failed with reason: %d",
				     result);

			result = usb_unlink_urb (port->interrupt_in_urb);
			if (result)
				dbg (__FUNCTION__ " - usb_unlink_urb "
				     "(interrupt_in_urb) failed with reason: %d",
				     result);
		}

		port->active = 0;
		port->open_count = 0;
	}

	up (&port->sem);
	MOD_DEC_USE_COUNT;
}

static int set_modem_info (struct usb_serial_port *port, unsigned int cmd, unsigned int *value)
{
	struct pl2303_private *priv = port->private;
	unsigned int arg;

	if (copy_from_user(&arg, value, sizeof(int)))
		return -EFAULT;

	switch (cmd) {
		case TIOCMBIS:
			if (arg & TIOCM_RTS)
				priv->line_control |= CONTROL_RTS;
			if (arg & TIOCM_DTR)
				priv->line_control |= CONTROL_DTR;
			break;

		case TIOCMBIC:
			if (arg & TIOCM_RTS)
				priv->line_control &= ~CONTROL_RTS;
			if (arg & TIOCM_DTR)
				priv->line_control &= ~CONTROL_DTR;
			break;

		case TIOCMSET:
			/* turn off RTS and DTR and then only turn
			   on what was asked to */
			priv->line_control &= ~(CONTROL_RTS | CONTROL_DTR);
			priv->line_control |= ((arg & TIOCM_RTS) ? CONTROL_RTS : 0);
			priv->line_control |= ((arg & TIOCM_DTR) ? CONTROL_DTR : 0);
			break;
	}

	return set_control_lines (port->serial->dev, priv->line_control);
}

static int get_modem_info (struct usb_serial_port *port, unsigned int *value)
{
	struct pl2303_private *priv = port->private;
	unsigned int mcr = priv->line_control;
	unsigned int result;

	result = ((mcr & CONTROL_DTR)		? TIOCM_DTR : 0)
		  | ((mcr & CONTROL_RTS)	? TIOCM_RTS : 0);

	dbg (__FUNCTION__ " - result = %x", result);

	if (copy_to_user(value, &result, sizeof(int)))
		return -EFAULT;
	return 0;
}

static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
{
	dbg (__FUNCTION__" (%d) cmd = 0x%04x", port->number, cmd);

	switch (cmd) {
		
		case TIOCMGET:
			dbg (__FUNCTION__" (%d) TIOCMGET", port->number);
			return get_modem_info (port, (unsigned int *)arg);

		case TIOCMBIS:
		case TIOCMBIC:
		case TIOCMSET:
			dbg(__FUNCTION__" (%d) TIOCMSET/TIOCMBIC/TIOCMSET",  port->number);
			return set_modem_info(port, cmd, (unsigned int *) arg);

		default:
			dbg (__FUNCTION__" not supported = 0x%04x", cmd);
			break;
	}

	return -ENOIOCTLCMD;
}


static void pl2303_break_ctl (struct usb_serial_port *port, int break_state)
{
	struct usb_serial *serial = port->serial;
	u16 state;
	int result;

	dbg (__FUNCTION__ " - port %d", port->number);

	if (break_state == 0)
		state = BREAK_OFF;
	else
		state = BREAK_ON;
	dbg (__FUNCTION__" - turning break %s", state==BREAK_OFF ? "off" : "on");

	result = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
				  BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 
				  0, NULL, 0, 100);
	if (result)
		dbg (__FUNCTION__" - error sending break = %d", result);
}


static void pl2303_shutdown (struct usb_serial *serial)
{
	int i;

	dbg (__FUNCTION__);

	/* stop everything on all ports */
	for (i = 0; i < serial->num_ports; ++i)
		while (serial->port[i].open_count > 0) {
			pl2303_close (&serial->port[i], NULL);
			kfree (serial->port[i].private);
		}
}


static void pl2303_read_int_callback (struct urb *urb)
{
	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
	//unsigned char *data = urb->transfer_buffer;
	//int i;

//ints auto restart...

	if (!serial) {
		return;
	}

	if (urb->status) {
		urb->status = 0;
		return;
	}

	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
#if 0
//FIXME need to update state of terminal lines variable
#endif

	return;
}


static void pl2303_read_bulk_callback (struct urb *urb)
{
	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
	struct tty_struct *tty;
	unsigned char *data = urb->transfer_buffer;
	int i;
	int result;

	if (port_paranoia_check (port, __FUNCTION__))
		return;

	dbg(__FUNCTION__ " - port %d", port->number);

	if (!serial) {
		dbg(__FUNCTION__ " - bad serial pointer, exiting");
		return;
	}

	if (urb->status) {
		dbg (__FUNCTION__ " - urb->status = %d", urb->status);
		if (!port->active) {
			dbg (__FUNCTION__ " - port is closed, exiting.");
			return;
		}
		if (urb->status == -EPROTO) {
			/* PL2303 mysteriously fails with -EPROTO reschedule the read */
			dbg (__FUNCTION__ " - caught -EPROTO, resubmitting the urb");
			urb->status = 0;
			urb->dev = serial->dev;
			result = usb_submit_urb(urb);
			if (result)
				err(__FUNCTION__ " - failed resubmitting read urb, error %d", result);
			return;
		}
		dbg (__FUNCTION__ " - unable to handle the error, exiting.");
		return;
	}

	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);

	tty = port->tty;
	if (urb->actual_length) {
		for (i = 0; i < urb->actual_length; ++i) {
			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
				tty_flip_buffer_push(tty);
			}
			tty_insert_flip_char (tty, data[i], 0);
		}
		tty_flip_buffer_push (tty);
	}

	/* Schedule the next read _if_ we are still open */
	if (port->active) {
		urb->dev = serial->dev;
		result = usb_submit_urb(urb);
		if (result)
			err(__FUNCTION__ " - failed resubmitting read urb, error %d", result);
	}

	return;
}



static void pl2303_write_bulk_callback (struct urb *urb)
{
	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
	int result;

	if (port_paranoia_check (port, __FUNCTION__))
		return;
	
	dbg(__FUNCTION__ " - port %d", port->number);
	
	if (urb->status) {
		/* error in the urb, so we have to resubmit it */
		if (serial_paranoia_check (port->serial, __FUNCTION__)) {
			return;
		}
		dbg (__FUNCTION__ " - Overflow in write");
		dbg (__FUNCTION__ " - nonzero write bulk status received: %d", urb->status);
		port->write_urb->transfer_buffer_length = 1;
		port->write_urb->dev = port->serial->dev;
		result = usb_submit_urb (port->write_urb);
		if (result)
			err(__FUNCTION__ " - failed resubmitting write urb, error %d", result);

		return;
	}

	queue_task(&port->tqueue, &tq_immediate);
	mark_bh(IMMEDIATE_BH);

	return;
}


static int __init pl2303_init (void)
{
	usb_serial_register (&pl2303_device);
	info(DRIVER_DESC " " DRIVER_VERSION);
	return 0;
}


static void __exit pl2303_exit (void)
{
	usb_serial_deregister (&pl2303_device);
}


module_init(pl2303_init);
module_exit(pl2303_exit);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

MODULE_PARM(debug, "i");
MODULE_PARM_DESC(debug, "Debug enabled or not");