config.in

基于S3CEB2410平台LINUX操作系统下 USB驱动源代码

#
# USB device configuration
#
mainmenu_option next_comment
comment 'USB support'

# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
if [ "$CONFIG_PCI" = "y" -o "$CONFIG_SA1111" = "y" -o \
     "$CONFIG_ARCH_S3C2400" = "y" -o "$CONFIG_SA1100_KINGS" = "y" -o \
	 "$CONFIG_SA1100_SUNS" = "y" -o "$CONFIG_ARCH_S3C2410" = "y" ]; then
   tristate 'Support for USB' CONFIG_USB
else
   define_bool CONFIG_USB n
fi

if [ "$CONFIG_USB" = "y" -o  "$CONFIG_USB" = "m" ]; then
   bool '  USB verbose debug messages' CONFIG_USB_DEBUG

comment 'Miscellaneous USB options'
   bool '  Preliminary USB device filesystem' CONFIG_USB_DEVICEFS
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      bool '  Enforce USB bandwidth allocation (EXPERIMENTAL)' CONFIG_USB_BANDWIDTH
   else
      define_bool CONFIG_USB_BANDWIDTH n
   fi
   bool '  Long timeout for slow-responding devices (some MGE Ellipse UPSes)' CONFIG_USB_LONG_TIMEOUT
fi

comment 'USB Controllers'
if [ "$CONFIG_USB_UHCI_ALT" != "y" -a "$CONFIG_USB_UHCI124" != "y" -a "$CONFIG_USB_UHCI124" != "m" ]; then
     dep_tristate '  UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
fi
if [ "$CONFIG_USB_UHCI" != "y" -a "$CONFIG_USB_UHCI124" != "y" -a "$CONFIG_USB_UHCI124" != "m" ]; then
     dep_tristate '  UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
fi
if [ "$CONFIG_USB_UHCI" != "y" -a "$CONFIG_USB_UHCI_ALT" != "y" ]; then
     dep_tristate '  TransDimension UHC124 Driver support' CONFIG_USB_UHCI124 $CONFIG_USB
fi
if [ "$CONFIG_USB_UHCI124" != "n" ]; then
   int '    Number of UHC124 ports to support' UHC124_NUM_PORTS 4
   if [ "$CONFIG_SA1100_ACCELENT" = "y" ]; then
      int '    Access Byte Spread' BYTES_SPREAD 4
   else
      define_bool BYTES_SPREAD y
   fi
fi
dep_tristate '  OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
dep_tristate '  SA1111 OHCI-compatible host interface support' CONFIG_USB_OHCI_SA1111 $CONFIG_USB $CONFIG_SA1111
if [ "$CONFIG_ARCH_S3C2410" = "y" ]; then
   dep_tristate '  S3C2410 OHCI-compatible host interface support' CONFIG_USB_OHCI_S3C2410 $CONFIG_USB
   if [ "$CONFIG_USB_OHCI_S3C2410" != "n" ]; then
      int  '    Maximum port(s) of RootHub' CONFIG_MAX_ROOT_PORTS 1
   fi
fi

comment 'USB Device Class drivers'
dep_tristate '  USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
dep_tristate '  USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
if [ "$CONFIG_SCSI" = "n" ]; then
   comment '  SCSI support is needed for USB Storage'
fi
dep_tristate '  USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
   dep_mbool '    USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
   dep_mbool '    Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
   dep_mbool '    Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM  $CONFIG_USB_STORAGE
   dep_mbool '    ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
   dep_mbool '    Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
   dep_mbool '    HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
   dep_mbool '    SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
   dep_mbool '    Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_tristate '  USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
dep_tristate '  USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB

comment 'USB Human Interface Devices (HID)'
if [ "$CONFIG_INPUT" = "n" ]; then
   comment '  Input core support is needed for USB HID'
else
   dep_tristate '  USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB $CONFIG_INPUT
      dep_mbool '    /dev/hiddev raw HID device support (EXPERIMENTAL)' CONFIG_USB_HIDDEV $CONFIG_USB_HID
   if [ "$CONFIG_USB_HID" != "y" ]; then
      dep_tristate '  USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
      dep_tristate '  USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
   fi
   dep_tristate '  Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT
fi

comment 'USB Imaging devices'
dep_tristate '  USB Kodak DC-2xx Camera support' CONFIG_USB_DC2XX $CONFIG_USB
dep_tristate '  USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_USB_MDC800 $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate '  USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
dep_tristate '  Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
dep_tristate '  HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL

comment 'USB Multimedia devices'
if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
   comment '  Video4Linux support is needed for USB Multimedia device support'
else
   dep_tristate '  USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
   dep_tristate '  USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
   dep_tristate '  USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
   dep_tristate '  USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
   dep_tristate '  USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
   dep_tristate '  USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
   dep_tristate '  D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
   dep_tristate '  DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
fi

comment 'USB Network adaptors'
if [ "$CONFIG_NET" = "n" ]; then
   comment '  Networking support is needed for USB Networking device support'
else
   dep_tristate '  USB ADMtek Pegasus-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
   dep_tristate '  USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
   dep_tristate '  USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
   dep_tristate '  USB Communication Class Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
   dep_tristate '  USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
fi

comment 'USB port drivers'
dep_tristate '  USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT
source drivers/usb/serial/Config.in

comment 'USB Miscellaneous drivers'
dep_tristate '  USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL

endmenu