usart.plg

stm32初级例程

Build target 'FLASH'
assembling STM32F10x.s...
compiling STM32_Init.c...
compiling Retarget.c...
compiling Usart.c...
linking...
Program Size: Code=1220 RO-data=268 RW-data=12 ZI-data=1044  
FromELF: creating hex file...
".\out\ObjFlash\Usart.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Documents and Settings\\Administrator\\桌面\\精英资料\\精英STM32资料光盘\\程序代码\\初级例程\\STM32 实验15-USART_Irq串口中断方式(直接操作寄存器)\\out\\ObjFlash\\Usart.AXF" 
JLink Speed: 4000 kHz
VTarget = 3.300V
DLL version V4.03r, compiled Mar  9 2009 18:04:21
Firmware: J-Link ARM-OB STM32 compiled Jan 27 2010 19:31:22
Hardware: V7.00
Found SWD-DP with ID 1ba01477
TPIU fitted.
ETM fitted.
  FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          0
Found SWD-DP with ID 0x1BA01477
Found SWD-DP with ID 1ba01477
TPIU fitted.
ETM fitted.
  FPUnit: 6 code (BP) slots and 2 literal slots
***JLink Warning: T-bit of XPSR is 0 but should be 1. Changed to 1.
Found SWD-DP with ID 1ba01477
TPIU fitted.
ETM fitted.
  FPUnit: 6 code (BP) slots and 2 literal slots
Found SWD-DP with ID 1ba01477
TPIU fitted.
ETM fitted.
  FPUnit: 6 code (BP) slots and 2 literal slots
Erase Done.
Programming Done.
Verify OK.
Build target 'FLASH'
assembling STM32F10x.s...
compiling STM32_Init.c...
compiling Retarget.c...
compiling Usart.c...
linking...
Program Size: Code=1220 RO-data=268 RW-data=12 ZI-data=1044  
FromELF: creating hex file...
".\out\ObjFlash\Usart.axf" - 0 Error(s), 0 Warning(s).