comm.h

lab windows uart driver

/*命令列表*/
#define		WRFLASH		1
#define		RDFLASH		2
#define		RDBATT		3
#define		TXON		4
#define		TXSTOP		5
#define		TXPWR		6
#define		TXFREQ		7
#define		RXON		8
#define		RXSTOP		9
#define		RXDATA		10
#define		RXIQPWR		11
#define		RXFREQ		12
#define		LCDSHOW		13	
#define		AUDLOOP		14
#define		BELL		15
#define		VIBRATOR	16
#define		MODECHG		17
#define		KEYBD		18
#define		RDVER		19
#define		RDFTBL		20
#define		WRFTBL		21
#define		RDTMP		22
#define		LCDLIGHT	23
#define		RDIMEI		24
#define		WRIMEI		25
#define		WRBATT		26
#define		KBVAL		27
#define		COMTEST		28
#define     BKLIGHT		29
#define     RDMTBL		30
#define     WRMTBL      31
#define     RDBADC      32
#define     WRBADC      33
#define     RDOUTDATE   34 
#define     WROUTDATE   35 
#define     RDFLUSHDATE 36 
#define     EXIT        37
#define     WRCTL       38
#define     RDCTL       39
#define     RDRFADC     40  
#define     RXIQSRLDATA 41
#define     WRIQVAL     42	   //write iq imblance
#define     WTGAININ    43	   //write voice gain
#define     RDGAININ    44	   //read voice gain
#define     RDBODNO   	45 	   //read board no     
#define     WTBODNO     46	   //write board no
#define     RDFLAG		47	   //read test flag
#define     WTFLAG		48	   //write test flag
#define     WTHDVER		49     //write hardware version
#define     WTMIC       50
#define     RDMIC       51
#define     USIMCHECK   52
#define     UPDATEFTBL  53
#define     GPIOMES		54

#define     GSMCOMMAND  80	   /* GSM透传命令     */               
#define     GSMCPFTOM   81	   /* 复制NVRAM到共享内存*/                                   
#define     GSMRDFLAG   82	   /* 读取GSM码表flag（NVRAM） */   
#define     GSMUPDATE   83	   /* 更新GSM码表（共享内存到NVRAM） */                                   
#define     GSMRDMTBL   84	   /* 读GSM码表（共享内存） */     
#define     GSMWRMTBL   85	   /* 写GSM码表（共享内存） */    

#define 	RDFLASHINFO	  86	/* Read flash information*/ 
#define 	RDRTC		  87  /* Read RTC*/
#define 	WRRTC	   	  88  /* Write RTC*/

#define     RCURADC		  100
#define     RCURADCDAC16  106
#define     RCURADCDAC64  107
#define     RFLASHCURADC  101
#define     WFLASHCURADC  102
#define     RTEMADC		  103
#define     RFLASHTEMADC  104
#define     WFLASHTEMADC  105  
#define     ACCCCHG		  108 
#define     LCAMPREVIEW	  109
#define     SCAMPREVIEW	  110
#define     LCAMSNAPSHOT  111

#define     ACINDETECTE   113
#define     ACINDEINIT    114
#define     SDWRITECARD	  115
#define     SDREADCARD	  116
#define     SDREADCAPAB	  117	
#define     HEADSETDTEST  118
#define     HEADSETINIT   119
#define		BLUETESTMODE  120
#define		BLUEADDRR     121
#define		BLUEADDRW	  122
#define		LCAMSAVEPH	  123 
#define		LCAMGETPHLEN  124
#define		LCAMGETPH     125	
#define		FM			126

#define		USB			127

							   
/*GSM控制命令列表*/			                                       
#define ADIL1CAL_PRIM_FIRST                  0x00008900
typedef enum _ADIL1CAL_PRIMITIVES_
{							           
	ADIL1CAL_THREAD_LOOKUP_CNF 					= ADIL1CAL_PRIM_FIRST,
	ADIL1CAL_THREAD_LOOKUP_REQ 					= 0x00008901,
	ADIL1CAL_THREAD_LOOKUP_TIME_OUT 			= 0x00008902,
	ADIL1CAL_ENTER_TEST_MODE_REQ 				= 0x00008903,
	ADIL1CAL_ENTER_TEST_MODE_CNF 				= 0x00008904,
	ADIL1CAL_LEAVE_TEST_MODE_REQ 				= 0x00008905,
	ADIL1CAL_LEAVE_TEST_MODE_CNF 				= 0x00008906,
	ADIL1CAL_DO_RSSI_MES_REQ 					= 0x00008907,
	ADIL1CAL_DO_RSSI_MES_CNF 					= 0x00008908,
	ADIL1CAL_DO_FREQ_OFFSET_MES_REQ 			= 0x00008909,
	ADIL1CAL_DO_FREQ_OFFSET_MES_CNF 			= 0x0000890A,
	ADIL1CAL_DO_SET_AFC_DAC_REQ 				= 0x0000890B,
	ADIL1CAL_DO_SET_AFC_DAC_CNF 				= 0x0000890C,
	ADIL1CAL_DO_WRITE_GAIN_CODE_REQ 			= 0x0000890D,
	ADIL1CAL_DO_WRITE_GAIN_CODE_CNF 			= 0x0000890E,
	ADIL1CAL_DO_READ_GAIN_CODE_REQ 				= 0x0000890F,
	ADIL1CAL_DO_READ_GAIN_CODE_CNF 				= 0x00008910,
	ADIL1CAL_DO_TRANSMIT_REQ 					= 0x00008911,
	ADIL1CAL_DO_TRANSMIT_CNF 					= 0x00008912,
	ADIL1CAL_DO_STOP_TRANSMIT_REQ 				= 0x00008913,
	ADIL1CAL_DO_STOP_TRANSMIT_CNF 				= 0x00008914,
	ADIL1CAL_DO_WRITE_TO_NVRAM_REQ 				= 0x00008915,
	ADIL1CAL_DO_WRITE_TO_NVRAM_CNF 				= 0x00008916,
	ADIL1CAL_DO_WRITE_ABB_REG_REQ 				= 0x00008917,
	ADIL1CAL_DO_WRITE_ABB_REG_CNF 				= 0x00008918,
	ADIL1CAL_DO_READ_ABB_REG_REQ 				= 0x00008919,
	ADIL1CAL_DO_READ_ABB_REG_CNF 				= 0x0000891A,
	ADIL1CAL_DO_RESET_ABB_REQ 					= 0x0000891B,
	ADIL1CAL_DO_RESET_ABB_CNF 					= 0x0000891C,
	ADIL1CAL_DO_UPDATE_TX_SCALE_REQ 			= 0x0000891D,
	ADIL1CAL_DO_UPDATE_TX_SCALE_CNF 			= 0x0000891E,
	ADIL1CAL_DO_DATA_THREAD_CLOSE_REQ 			= 0x0000891F,
	ADIL1CAL_DO_RSSI_THREAD_CLOSE_REQ 			= 0x00008920,
	ADIL1CAL_DO_FREQ_OFFSET_THREAD_CLOSE_REQ 	= 0x00008921,
	ADIL1CAL_DO_TX_THREAD_CLOSE_REQ 			= 0x00008922,
	ADIL1CAL_DO_ABB_THREAD_CLOSE_REQ 			= 0x00008923,
	ADIL1CAL_GO 								= 0x00008924,
}ADIL1CAL_PRIMITIVES;

/*band定义*/
typedef enum
{
	GSM850,
	GSM900,
	DCS1800,
	PCS1900,
}BandType_t;