init1835viaspi.c

来自「ADI 公司的DSP ADSP21262 EZ-KIT LITE开发板的全部源代」· C语言 代码 · 共 107 行

#include "Sample Playback.h"
#include "ad1835.h"

void Delay(int);
void SetupSPI1835(void);
void DisableSPI1835(void);

/* Setup the SPI pramaters here in a buffer first */
unsigned int Config1835Param [] = {
            WR | DACCTRL1 | DACI2S | DAC24BIT | DACFS48,
            WR | DACCTRL2 ,//| DACMUTE_R4 | DACMUTE_L4,
            WR | DACVOL_L1 | DACVOL_MAX,
            WR | DACVOL_R1 | DACVOL_MAX,
            WR | DACVOL_L2 | DACVOL_MAX,
            WR | DACVOL_R2 | DACVOL_MAX,
            WR | DACVOL_L3 | DACVOL_MAX,
            WR | DACVOL_R3 | DACVOL_MAX,
            WR | DACVOL_L4 | DACVOL_MAX,
            WR | DACVOL_R4 | DACVOL_MAX,
            WR | ADCCTRL1 | ADCFS48,
            WR | ADCCTRL2 | ADCI2S | ADC24BIT,
            WR | ADCCTRL3 | IMCLKx2
        } ;

volatile int spiFlag ;

void SetupSPI1835 ()
{
    /* First configure the SPI Control registers */
    /* First clear a few registers     */
    *pSPICTL = (TXFLSH | RXFLSH) ;
    *pSPIFLG = 0;

    /* Setup the baud rate to 1MHz */
    *pSPIBAUD = 100;

    /* Setup the SPI Flag register to FLAG3 : 0xF708*/
    *pSPIFLG = 0xF708;

    /* Now setup the SPI Control register : 0x5281*/
    *pSPICTL = (SPIEN | SPIMS | MSBF | WL16 | TIMOD1) ;

}

void DisableSPI1835 ()
{
    *pSPICTL = (TXFLSH | RXFLSH);
}

void Configure1835Register (int val)
{
    int i ;

    *(volatile int *)TXSPI = val ;
    Delay (100) ;
    // Now wait until you have got a flag from the ISR that says
    // transmission of the data is complete.

    while (1)
    {
        spiFlag = *(volatile int *)SPISTAT ;
        if (spiFlag & SPIF)
            break ;
    }
    Delay (100) ;
}

unsigned int Get1835Register (int val)
{
    int i ;
    *(volatile int *)TXSPI = val ;
    Delay (100) ;
    // Now wait until you have got the receive falg from ISR
    // that says you received the data well.
    while (1)
    {
        spiFlag = *(volatile int *)SPISTAT ;
        if (spiFlag & RXS)
            break ;
    }
    Delay (100) ;
    i = (*(volatile int *)RXSPI) ;
    return i ;
}

void Init1835viaSPI()
{
    int configSize = sizeof (Config1835Param) / sizeof (int) ;
    int i ;

    SetupSPI1835 () ;

    for (i = 0; i < configSize; ++i)
    {
        Configure1835Register (Config1835Param[i]) ;
    }

    DisableSPI1835 () ;

}

void Delay (int i)
{
    for (;i>0;--i)
        asm ("nop;") ;
}