btc_cdemo.cpp

ADI 公司的DSP ADSP21262 EZ-KIT LITE开发板的全部源代码

/////////////////////////////////////////////////////////////////////////////
//
// Example C program using Background Telemetry Channel (BTC)
// Analog Devices 2004
//
// This program defines several BTCs to allow transfer of data over the BTC
// interface while the DSP is running.  Use the BTC Memory window in the
// debugger to view each channels data.  The defined channels are described
// below:
// 
// Timer Interrupt Counter:  This channel is defined to be 1-word (4-bytes)
//		   				     in length and simply counts the number of timer
//							 interrupts that have occured.
//
// Constant Data Value: This channel is defined to be 1-word (4-bytes) in length and
//			            simply displays a constant value that is not changed by the
//                      the running program.
//
// Constant Data Buffer: This channel is defined to be 8-words (32-bytes) in length and
//			            simply displays an array of constant values that are not changed by the
//                      the running program.
//
// Data Array (8kw):  This channel is defined to be 8-kwords in length.  The first word of the
//					  channel is used to count the number of timer interrupts that have occured.
//
// NOTE:  In order for the LEDs to function properly SW8.6 (LED_CS_SW) should be set in the OFF position.
/////////////////////////////////////////////////////////////////////////////



#include "btc.h"
#include "signal.h"

#if defined (__ADSP21262__)
#include "def21262.h"
	asm("#include <def21262.h>");
#elif defined (__ADSP21364__)
	#include "def21364.h"
	asm("#include <def21364.h>");	
#elif defined (__ADSP21369__)
	#include "def21369.h"
	asm("#include <def21369.h>");		
#endif

#define DATA_BUF_SIZE  		8
#define ARRAY_SIZE			0x2000

////////////////////////////
// Variable Definitions
////////////////////////////
int timerCounter = 0;
int dataVal = 0x11223344;
int dataBuf[DATA_BUF_SIZE] = {0x11223344,0x55667788,0x99aabbcc,0xddeeff00,
                              0x55555555,0x66666666,0x77777777,0x88888888};
int array1[ARRAY_SIZE];

////////////////////////
// Function Prototypes
////////////////////////
void initLEDs(void);
void initInterrupts(void);
void initTimer(void);

void GPTimer0_isr(int signal);

////////////////////
// BTC Definitions
////////////////////
BTC_MAP_BEGIN
//             Channel Name,             Starting Address,    Length
BTC_MAP_ENTRY("Timer Interrupt Counter", (long)&timerCounter, sizeof(timerCounter))
BTC_MAP_ENTRY("Constant Data Value", 	 (long)&dataVal, 	  sizeof(dataVal))
BTC_MAP_ENTRY("Constant Data Buffer", 	 (long)dataBuf, 	  sizeof(dataBuf))
BTC_MAP_ENTRY("Data Array (8kw)", 		 (long)array1,        sizeof(array1))
BTC_MAP_END

///////////////////
//  Main Program
///////////////////
int main()
{
	
	// an example of getting the starting address and length of
	// a defined channel using macros defined in btc.h
	int addr, len;
	addr = BTC_CHANNEL_ADDR(0);
	len  = BTC_CHANNEL_LEN(0);
	
	for(int i = 0; i < ARRAY_SIZE; ++i)
	{
		array1[i] = i;
	}
	
	// initialize the different components of the program
	btc_init();
	
	initLEDs();
	initInterrupts();
	initTimer();
	
	while(1);
	
}


void initLEDs()
{
	// disable the parallel port and use AD pins as Flags
	unsigned int *pSysctl = (unsigned int *)SYSCTL;

#if defined (__ADSP21262__) || (__ADSP21364__)
	*pSysctl |= PPFLGS;
#elif defined (__ADSP21369__)
		*pSysctl |= MSEN;
#endif
	
	
	// set flags 8-15 as outputs and turn them off
	asm("bit set flags FLG15O|FLG14O|FLG13O|FLG12O|FLG11O|FLG10O|FLG9O|FLG8O;");
	asm("bit clr flags FLG15|FLG14|FLG13|FLG12|FLG11|FLG10|FLG9|FLG8;");
}

void initInterrupts()
{
	// enable the gptimer0 and low-priority emulator interrupt
#if defined (__ADSP21262__)	
	interrupt(SIG_GPTMR0, GPTimer0_isr);
#else // ADSP-21364	
	interrupt(SIG_P2, GPTimer0_isr);
#endif
	interrupt(SIG_EMUL,   btc_isr);
}


void initTimer()
{
	unsigned int *pTim0Ctl = (unsigned int *)TM0CTL;
	unsigned int *pTim0Prd = (unsigned int *)TM0PRD;
	unsigned int *pTim0Wid = (unsigned int *)TM0W;
	unsigned int *pTimStat = (unsigned int *)TMSTAT;
	
	*pTim0Ctl = TIMODEPWM | PRDCNT | IRQEN;		// configure the timer
	*pTim0Prd = 0x00800000;						// timer period
	*pTim0Wid = 1;								// timer width
	*pTimStat = BIT_8;							// enable the timer
}


void GPTimer0_isr(int signal)
{
	// clear timer interrupt status
	unsigned int *pTim0Stat = (unsigned int *)TMSTAT;
	*pTim0Stat = TIM0IRQ;
	
	++timerCounter;				// count number of timer interrupts
	array1[0] = timerCounter;	// reflect count in first location of array1
	
	// toggle LED1 on the EZ-Kit
	asm("bit tgl flags FLG8;");
}