posix_qextserialport.cpp

QT 下linux串口类

            case BAUD14400:
                TTY_WARNING("Posix_QextSerialPort: POSIX does not support 14400 baud operation.  Switching to 9600 baud.");
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B9600;
#else
                cfsetispeed(&Posix_CommConfig, B9600);
                cfsetospeed(&Posix_CommConfig, B9600);
#endif
                break;

            /*19200 baud*/
            case BAUD19200:
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B19200;
#else
                cfsetispeed(&Posix_CommConfig, B19200);
                cfsetospeed(&Posix_CommConfig, B19200);
#endif
                break;

            /*38400 baud*/
            case BAUD38400:
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B38400;
#else
                cfsetispeed(&Posix_CommConfig, B38400);
                cfsetospeed(&Posix_CommConfig, B38400);
#endif
                break;

            /*56000 baud*/
            case BAUD56000:
                TTY_WARNING("Posix_QextSerialPort: POSIX does not support 56000 baud operation.  Switching to 38400 baud.");
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B38400;
#else
                cfsetispeed(&Posix_CommConfig, B38400);
                cfsetospeed(&Posix_CommConfig, B38400);
#endif
                break;

            /*57600 baud*/
            case BAUD57600:
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B57600;
#else
                cfsetispeed(&Posix_CommConfig, B57600);
                cfsetospeed(&Posix_CommConfig, B57600);
#endif
                break;

            /*76800 baud*/
            case BAUD76800:
                TTY_PORTABILITY_WARNING("Posix_QextSerialPort Portability Warning: Windows and some POSIX systems do not support 76800 baud operation.");
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);

#ifdef B76800
                Posix_CommConfig.c_cflag|=B76800;
#else
                TTY_WARNING("Posix_QextSerialPort: Posix_QextSerialPort was compiled without 76800 baud support.  Switching to 57600 baud.");
                Posix_CommConfig.c_cflag|=B57600;
#endif //B76800
#else  //CBAUD
#ifdef B76800
                cfsetispeed(&Posix_CommConfig, B76800);
                cfsetospeed(&Posix_CommConfig, B76800);
#else
                TTY_WARNING("Posix_QextSerialPort: Posix_QextSerialPort was compiled without 76800 baud support.  Switching to 57600 baud.");
                cfsetispeed(&Posix_CommConfig, B57600);
                cfsetospeed(&Posix_CommConfig, B57600);
#endif //B76800
#endif //CBAUD
                break;

            /*115200 baud*/
            case BAUD115200:
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B115200;
#else
                cfsetispeed(&Posix_CommConfig, B115200);
                cfsetospeed(&Posix_CommConfig, B115200);
#endif
                break;

            /*128000 baud*/
            case BAUD128000:
                TTY_WARNING("Posix_QextSerialPort: POSIX does not support 128000 baud operation.  Switching to 115200 baud.");
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B115200;
#else
                cfsetispeed(&Posix_CommConfig, B115200);
                cfsetospeed(&Posix_CommConfig, B115200);
#endif
                break;

            /*256000 baud*/
            case BAUD256000:
                TTY_WARNING("Posix_QextSerialPort: POSIX does not support 256000 baud operation.  Switching to 115200 baud.");
#ifdef CBAUD
                Posix_CommConfig.c_cflag&=(~CBAUD);
                Posix_CommConfig.c_cflag|=B115200;
#else
                cfsetispeed(&Posix_CommConfig, B115200);
                cfsetospeed(&Posix_CommConfig, B115200);
#endif
                break;
        }
        tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
    }
    UNLOCK_MUTEX();
}

/*!
\fn void Posix_QextSerialPort::setDataBits(DataBitsType dataBits)
Sets the number of data bits used by the serial port.  Possible values of dataBits are:
\verbatim
    DATA_5      5 data bits
    DATA_6      6 data bits
    DATA_7      7 data bits
    DATA_8      8 data bits
\endverbatim

\note
This function is subject to the following restrictions:
\par
    5 data bits cannot be used with 2 stop bits.
\par
    8 data bits cannot be used with space parity on POSIX systems.

*/
void Posix_QextSerialPort::setDataBits(DataBitsType dataBits)
{
    LOCK_MUTEX();
    if (Settings.DataBits!=dataBits) {
        if ((Settings.StopBits==STOP_2 && dataBits==DATA_5) ||
            (Settings.StopBits==STOP_1_5 && dataBits!=DATA_5) ||
            (Settings.Parity==PAR_SPACE && dataBits==DATA_8)) {
        }
        else {
            Settings.DataBits=dataBits;
        }
    }
    if (isOpen()) {
        switch(dataBits) {

            /*5 data bits*/
            case DATA_5:
                if (Settings.StopBits==STOP_2) {
                    TTY_WARNING("Posix_QextSerialPort: 5 Data bits cannot be used with 2 stop bits.");
                }
                else {
                    Settings.DataBits=dataBits;
                    Posix_CommConfig.c_cflag&=(~CSIZE);
                    Posix_CommConfig.c_cflag|=CS5;
                    tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                }
                break;

            /*6 data bits*/
            case DATA_6:
                if (Settings.StopBits==STOP_1_5) {
                    TTY_WARNING("Posix_QextSerialPort: 6 Data bits cannot be used with 1.5 stop bits.");
                }
                else {
                    Settings.DataBits=dataBits;
                    Posix_CommConfig.c_cflag&=(~CSIZE);
                    Posix_CommConfig.c_cflag|=CS6;
                    tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                }
                break;

            /*7 data bits*/
            case DATA_7:
                if (Settings.StopBits==STOP_1_5) {
                    TTY_WARNING("Posix_QextSerialPort: 7 Data bits cannot be used with 1.5 stop bits.");
                }
                else {
                    Settings.DataBits=dataBits;
                    Posix_CommConfig.c_cflag&=(~CSIZE);
                    Posix_CommConfig.c_cflag|=CS7;
                    tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                }
                break;

            /*8 data bits*/
            case DATA_8:
                if (Settings.StopBits==STOP_1_5) {
                    TTY_WARNING("Posix_QextSerialPort: 8 Data bits cannot be used with 1.5 stop bits.");
                }
                else {
                    Settings.DataBits=dataBits;
                    Posix_CommConfig.c_cflag&=(~CSIZE);
                    Posix_CommConfig.c_cflag|=CS8;
                    tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                }
                break;
        }
    }
    UNLOCK_MUTEX();
}

/*!
\fn void Posix_QextSerialPort::setParity(ParityType parity)
Sets the parity associated with the serial port.  The possible values of parity are:
\verbatim
    PAR_SPACE       Space Parity
    PAR_MARK        Mark Parity
    PAR_NONE        No Parity
    PAR_EVEN        Even Parity
    PAR_ODD         Odd Parity
\endverbatim

\note
This function is subject to the following limitations:
\par
POSIX systems do not support mark parity.
\par
POSIX systems support space parity only if tricked into doing so, and only with
   fewer than 8 data bits.  Use space parity very carefully with POSIX systems.

*/
void Posix_QextSerialPort::setParity(ParityType parity)
{
    LOCK_MUTEX();
    if (Settings.Parity!=parity) {
        if (parity==PAR_MARK || (parity==PAR_SPACE && Settings.DataBits==DATA_8)) {
        }
        else {
            Settings.Parity=parity;
        }
    }
    if (isOpen()) {
        switch (parity) {

            /*space parity*/
            case PAR_SPACE:
                if (Settings.DataBits==DATA_8) {
                    TTY_PORTABILITY_WARNING("Posix_QextSerialPort:  Space parity is only supported in POSIX with 7 or fewer data bits");
                }
                else {

                    /*space parity not directly supported - add an extra data bit to simulate it*/
                    Posix_CommConfig.c_cflag&=~(PARENB|CSIZE);
                    switch(Settings.DataBits) {
                        case DATA_5:
                            Settings.DataBits=DATA_6;
                            Posix_CommConfig.c_cflag|=CS6;
                            break;

                        case DATA_6:
                            Settings.DataBits=DATA_7;
                            Posix_CommConfig.c_cflag|=CS7;
                            break;

                        case DATA_7:
                            Settings.DataBits=DATA_8;
                            Posix_CommConfig.c_cflag|=CS8;
                            break;

                        case DATA_8:
                            break;
                    }
                    tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                }
                break;

            /*mark parity - WINDOWS ONLY*/
            case PAR_MARK:
                TTY_WARNING("Posix_QextSerialPort: Mark parity is not supported by POSIX.");
                break;

            /*no parity*/
            case PAR_NONE:
                Posix_CommConfig.c_cflag&=(~PARENB);
                tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                break;

            /*even parity*/
            case PAR_EVEN:
                Posix_CommConfig.c_cflag&=(~PARODD);
                Posix_CommConfig.c_cflag|=PARENB;
                tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                break;

            /*odd parity*/
            case PAR_ODD:
                Posix_CommConfig.c_cflag|=(PARENB|PARODD);
                tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                break;
        }
    }
    UNLOCK_MUTEX();
}

/*!
\fn void Posix_QextSerialPort::setStopBits(StopBitsType stopBits)
Sets the number of stop bits used by the serial port.  Possible values of stopBits are:
\verbatim
    STOP_1      1 stop bit
    STOP_1_5    1.5 stop bits
    STOP_2      2 stop bits
\endverbatim
\note
This function is subject to the following restrictions:
\par
    2 stop bits cannot be used with 5 data bits.
\par
    POSIX does not support 1.5 stop bits.

*/
void Posix_QextSerialPort::setStopBits(StopBitsType stopBits)
{
    LOCK_MUTEX();
    if (Settings.StopBits!=stopBits) {
        if ((Settings.DataBits==DATA_5 && stopBits==STOP_2) || stopBits==STOP_1_5) {}
        else {
            Settings.StopBits=stopBits;
        }
    }
    if (isOpen()) {
        switch (stopBits) {

            /*one stop bit*/
            case STOP_1:
                Settings.StopBits=stopBits;
                Posix_CommConfig.c_cflag&=(~CSTOPB);
                tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                break;

            /*1.5 stop bits*/
            case STOP_1_5:
                TTY_WARNING("Posix_QextSerialPort: 1.5 stop bit operation is not supported by POSIX.");
                break;

            /*two stop bits*/
            case STOP_2:
                if (Settings.DataBits==DATA_5) {
                    TTY_WARNING("Posix_QextSerialPort: 2 stop bits cannot be used with 5 data bits");
                }
                else {
                    Settings.StopBits=stopBits;
                    Posix_CommConfig.c_cflag|=CSTOPB;
                    tcsetattr(Posix_File->handle(), TCSAFLUSH, &Posix_CommConfig);
                }
                break;
        }
    }
    UNLOCK_MUTEX();
}

/*!
\fn void Posix_QextSerialPort::setFlowControl(FlowType flow)
Sets the flow control used by the port.  Possible values of flow are:
\verbatim
    FLOW_OFF            No flow control
    FLOW_HARDWARE       Hardware (RTS/CTS) flow control
    FLOW_XONXOFF        Software (XON/XOFF) flow control
\endverbatim
\note
FLOW_HARDWARE may not be supported on all versions of UNIX.  In cases where it is
unsupported, FLOW_HARDWARE is the same as FLOW_OFF.

*/
void Posix_QextSerialPort::setFlowControl(FlowType flow)
{