interface.s

AVR单片机,STK500下载线制作全套资料,包括程序,电路图

	.module interface.c
	.area text(rom, con, rel)
	.dbfile E:\ICCAVR\project\AVRISP~1\icc\interface.c
	.dbfunc e interface_init _interface_init fV
	.even
_interface_init::
	.dbline -1
	.dbline 87
; /**	\file 
; 	<b>USB receive and transmit</b><br>
; 	Autor: Matthias Wei遝r<br>
; 	Copyright 2005: Matthias Wei遝r<br>
; 	License: QPL (see license.txt)
; 	<hr>
; */
; #include "stk500.h"
; 
; unsigned char checksum;
; 
; //#ifdef CONFIG_INTERFACE_USB
; #if 0
; 
; 	//Hardware
; 	#define	USB_TXE		(PINB&BIT6_POS)
; 	#define	USB_RXF		(PINC&BIT3_POS)
; 	#define	USB_RD_ON	PORTC&=BIT1_NEG
; 	#define	USB_RD_OFF	PORTC|=BIT1_POS
; 	#define	USB_WR_ON	PORTC|=BIT2_POS
; 	#define	USB_WR_OFF	PORTC&=BIT2_NEG
; 	
; 	/**
; 		Initializes the usb interface
; 	*/
; 	void interface_init(void)
; 	{
; 		PORTC |= BIT1_POS;			//USB_RD inactive
; 		DDRC |= BIT1_POS|BIT2_POS;	//USB_RD, USB_WR as output
; 	}
; 	
; 	/**
; 		Reads a byte from the USB interface
; 		
; 		@return received character or -1 if no character has been received
; 	*/
; 	signed int interface_getc(void)
; 	{
; 		unsigned char t;
; 		
; 		if(!USB_RXF)
; 		{	
; 			USB_RD_ON;
; 			asm("NOP");
; 			t = PIND;
; 			USB_RD_OFF;
; 			
; 			return t;
; 		}
; 		else return -1;
; 	}
; 	
; 	/**
; 		Writes a byte to the USB
; 		
; 		@param t Byte to be written	
; 	*/
; 	void interface_putc(unsigned char t)
; 	{
; 		while(USB_TXE);
; 		
; 		//PORTD auf Ausgang
; 		DDRD = 0xFF;
; 		//Daten auf den Port
; 		PORTD = t;
; 		
; 		USB_WR_ON;
; 		USB_WR_OFF;
; 		
; 		//PORTC auf Eingang
; 		DDRD = 0x00;
; 		//Pull-Ups ein
; 		PORTD = 0xFF;
; 		
; 		checksum ^= t;
; 	}
; 	
; #endif
; 
; #ifdef CONFIG_INTERFACE_RS232
; 	
; /**
; 	Initializes the rs232 interface
; 	3.6864MHz
; 	Autor: Lukas Salzburger
; */
; void interface_init(void) {
	.dbline 89
; 	#ifndef __iom88v_h				/*meag8*/
; 		UCSRB =  (1<<RXEN) | (1<<TXEN);
	ldi R24,24
	out 0xa,R24
	.dbline 90
; 		UBRRL = 1;
	ldi R24,1
	out 0x9,R24
	.dbline 91
; 		UBRRH = 0;
	clr R2
	out 0x20,R2
	.dbline -2
L2:
	.dbline 0 ; func end
	ret
	.dbend
	.dbfunc e interface_getc _interface_getc fI
	.even
_interface_getc::
	.dbline -1
	.dbline 106
; 	#else							/*mega88*/
; 		UCSR0B =  (1<<RXEN0) | (1<<TXEN0);
; 		UBRR0L = 1;
; 		UBRR0H = 0;
; 	#endif
; }
; 
; /**
; 	Reads a byte from the UART interface
; 	
; 	Autor: Lukas Salzburger
; 	
; 	@return received character or -1 if no character has been received
; */
; signed int interface_getc(void) {	/*获取PC机发来的一字节信息*/
	.dbline 109
; 
; 	#ifndef __iom88v_h				/*meag8*/
; 		if (UCSRA & (1<<RXC)) {
	sbis 0xb,7
	rjmp L4
	.dbline 109
	.dbline 110
; 			return UDR;
	in R16,0xc
	clr R17
	rjmp L3
L4:
	.dbline 112
; 			}
; 		else {
	.dbline 113
; 			return -1;
	ldi R16,-1
	ldi R17,-1
	.dbline -2
L3:
	.dbline 0 ; func end
	ret
	.dbend
	.dbfunc e interface_putc _interface_putc fV
;              t -> R16
	.even
_interface_putc::
	.dbline -1
	.dbline 132
; 			}
; 	#else							/*mega88*/
; 		if (UCSR0A & (1<<RXC0)) {
; 			return UDR0;
; 			}
; 		else {
; 			return -1;
; 			}
; 	#endif
; }
; 
; /**
; 	Writes a byte to the UART
; 	
; 	Autor: Lukas Salzburger
; 	
; 	@param t Byte to be written	
; */
; void interface_putc(unsigned char t) {
L7:
	.dbline 135
L8:
	.dbline 135
; 
; 	#ifndef __iom88v_h				/*meag8*/
; 		while (!(UCSRA & (1<<UDRE)));
	sbis 0xb,5
	rjmp L7
	.dbline 137
; 		
; 		UDR = t;
	out 0xc,R16
	.dbline 138
; 		checksum ^= t;
	lds R2,_checksum
	eor R2,R16
	sts _checksum,R2
	.dbline -2
L6:
	.dbline 0 ; func end
	ret
	.dbsym r t 16 c
	.dbend
	.dbfunc e interface_print _interface_print fV
;              s -> R20,R21
	.even
_interface_print::
	rcall push_gset1
	movw R20,R16
	.dbline -1
	.dbline 155
; 	#else							/*mega88*/
; 		while (!(UCSR0A & (1<<UDRE0)));
; 		
; 		UDR0 = t;
; 		checksum ^= t;
; 	#endif
; }
; 
; #endif
; 	
; /**
; 	Writes a string to USB
; 	
; 	@param s The string to be send
; */
; void interface_print(unsigned char *s)
; {
	rjmp L12
L11:
	.dbline 157
	.dbline 158
	movw R30,R20
	ldd R16,z+0
	rcall _interface_putc
	.dbline 159
	subi R20,255  ; offset = 1
	sbci R21,255
	.dbline 160
L12:
	.dbline 156
; 	while(*s)
	movw R30,R20
	ldd R2,z+0
	tst R2
	brne L11
	.dbline -2
L10:
	rcall pop_gset1
	.dbline 0 ; func end
	ret
	.dbsym r s 20 pc
	.dbend
	.dbfunc e interface_put16 _interface_put16 fV
;              t -> R20,R21
	.even
_interface_put16::
	rcall push_gset1
	movw R20,R16
	.dbline -1
	.dbline 170
; 	{
; 		interface_putc(*s);
; 		s++;
; 	}
; }
; 
; /**
; 	Sends a 16 bit value over the USB
; 	MSB first
; 	
; 	@param t Value to be send
; */
; void interface_put16(unsigned int t)
; {
	.dbline 171
; 	interface_putc((t>>8)&0xFF);
	movw R16,R20
	mov R16,R17
	clr R17
	andi R17,0
	rcall _interface_putc
	.dbline 172
; 	interface_putc((t>>0)&0xFF);
	mov R16,R20
	andi R17,0
	rcall _interface_putc
	.dbline -2
L14:
	rcall pop_gset1
	.dbline 0 ; func end
	ret
	.dbsym r t 20 i
	.dbend
	.dbfunc e interface_reset_check _interface_reset_check fV
	.even
_interface_reset_check::
	.dbline -1
	.dbline 179
; }
; 
; /**
; 	Resets the checksum accumulator
; */
; void interface_reset_check(void)
; {
	.dbline 180
; 	checksum=0;
	clr R2
	sts _checksum,R2
	.dbline -2
L15:
	.dbline 0 ; func end
	ret
	.dbend
	.dbfunc e interface_send_check _interface_send_check fV
	.even
_interface_send_check::
	.dbline -1
	.dbline 187
; }
; 
; /**
; 	Sends the accumulated checksum
; */
; void interface_send_check(void)
; {
	.dbline 188
; 	interface_putc(checksum);
	lds R16,_checksum
	rcall _interface_putc
	.dbline 189
; 	checksum=0;
	clr R2
	sts _checksum,R2
	.dbline -2
L16:
	.dbline 0 ; func end
	ret
	.dbend
	.area bss(ram, con, rel)
	.dbfile E:\ICCAVR\project\AVRISP~1\icc\interface.c
_checksum::
	.blkb 1
	.dbsym e checksum _checksum c