rs232.out

cop2000试验仪的模拟器

Reading in the Synopsys vhdl primitives.
Warning: Variable 'BAUD' is being read 
	in routine RS232 line 113 in file 'C:/cop2000p/xcv200/rs232/rs232.vhd', 
	but is not in the process sensitivity list of the block which begins 
	there.   (HDL-179)
Warning: Variable 'READ' is being read 
	in routine RS232 line 152 in file 'C:/cop2000p/xcv200/rs232/rs232.vhd', 
	but is not in the process sensitivity list of the block which begins 
	there.   (HDL-179)

Inferred THREE-STATE control devices in process 
	in routine RS232 line 59 in
         file 'C:/cop2000p/xcv200/rs232/rs232.vhd'.
============================================================================
|     Three-state Device Name      |               Type               | MB |
============================================================================
|         dataport_tri<5>          |        Three-state Buffer        | N  |
|         dataport_tri<1>          |        Three-state Buffer        | N  |
|         dataport_tri<3>          |        Three-state Buffer        | N  |
|         dataport_tri<7>          |        Three-state Buffer        | N  |
|         dataport_tri<6>          |        Three-state Buffer        | N  |
|         dataport_tri<2>          |        Three-state Buffer        | N  |
|         dataport_tri<0>          |        Three-state Buffer        | N  |
|         dataport_tri<4>          |        Three-state Buffer        | N  |
============================================================================


Inferred memory devices in process 
	in routine RS232 line 64 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|      XMIT_reg       | Flip-flop |   1   |  -  | -  | Y  | N  | N  | N  | N  |
===============================================================================

XMIT_reg
--------
    Async-reset: RXMIT + rst



Inferred memory devices in process 
	in routine RS232 line 76 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|      READ_reg       | Flip-flop |   1   |  -  | -  | Y  | N  | N  | N  | N  |
===============================================================================

READ_reg
--------
    Async-reset: PRI' + rst



Inferred memory devices in process 
	in routine RS232 line 88 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|      TSBUF_reg      | Flip-flop |   8   |  Y  | N  | Y  | N  | N  | N  | N  |
===============================================================================

TSBUF_reg (width 8)
-------------------
    Async-reset: rst



Inferred memory devices in process 
	in routine RS232 line 100 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|      BAUD_reg       | Flip-flop |   8   |  Y  | N  | Y  | N  | N  | N  | N  |
===============================================================================

BAUD_reg (width 8)
------------------
    Async-reset: rst



Inferred memory devices in process 
	in routine RS232 line 113 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|    baud_clk_reg     | Flip-flop |   1   |  -  | -  | Y  | N  | N  | N  | N  |
|    baud_cnt_reg     | Flip-flop |   8   |  Y  | N  | N  | N  | N  | N  | N  |
===============================================================================

baud_clk_reg
------------
    Async-reset: rst


baud_cnt_reg (width 8)
----------------------
    set/reset/toggle: none



Inferred memory devices in process 
	in routine RS232 line 134 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|    rxd_sync_reg     | Flip-flop |   1   |  -  | -  | N  | Y  | N  | N  | N  |
|   samples_reg<0>    | Flip-flop |   1   |  -  | -  | N  | Y  | N  | N  | N  |
===============================================================================

rxd_sync_reg
------------
    Async-set: rst


samples_reg<0>
--------------
    Async-set: rst



Inferred memory devices in process 
	in routine RS232 line 152 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|       RI_reg        | Flip-flop |   1   |  -  | -  | Y  | N  | N  | N  | N  |
|      RSBUF_reg      | Flip-flop |   8   |  Y  | N  | N  | N  | N  | N  | N  |
|     rxcnt16_reg     | Flip-flop |   4   |  Y  | N  | Y  | N  | N  | N  | N  |
|     rxd_cnt_reg     | Flip-flop |   4   |  Y  | N  | Y  | N  | N  | N  | N  |
|    rxd_shift_reg    | Flip-flop |   8   |  Y  | N  | Y  | N  | N  | N  | N  |
===============================================================================

RI_reg
------
    Async-reset: READ + rst


RSBUF_reg (width 8)
-------------------
    set/reset/toggle: none


rxcnt16_reg (width 4)
---------------------
    Async-reset: READ + rst


rxd_cnt_reg (width 4)
---------------------
    Async-reset: READ + rst


rxd_shift_reg (width 8)
-----------------------
    Async-reset: READ + rst



Inferred memory devices in process 
	in routine RS232 line 190 in file
         'C:/cop2000p/xcv200/rs232/rs232.vhd'.
===============================================================================
|    Register Name    |   Type    | Width | Bus | MB | AR | AS | SR | SS | ST |
===============================================================================
|      RXMIT_reg      | Flip-flop |   1   |  -  | -  | Y  | N  | N  | N  | N  |
|       TI_reg        | Flip-flop |   1   |  -  | -  | Y  | N  | N  | N  | N  |
|     txcnt16_reg     | Flip-flop |   4   |  N  | N  | ?  | ?  | ?  | ?  | ?  |
|     txd_cnt_reg     | Flip-flop |   4   |  Y  | N  | Y  | N  | N  | N  | N  |
|       txd_reg       | Flip-flop |   1   |  -  | -  | N  | Y  | N  | N  | N  |
|    txd_shift_reg    | Flip-flop |   8   |  N  | N  | ?  | ?  | ?  | ?  | ?  |
===============================================================================

RXMIT_reg
---------
    Async-reset: rst


TI_reg
------
    Async-reset: rst


txcnt16_reg<1>
--------------
    Async-reset: rst


txcnt16_reg<3>
--------------
    Async-reset: rst


txcnt16_reg<2>
--------------
    Async-reset: rst


txcnt16_reg<0>
--------------
    Async-reset: rst


txd_cnt_reg (width 4)
---------------------
    Async-reset: rst


txd_reg
-------
    Async-set: rst


txd_shift_reg<3>
----------------
    Async-reset: rst


txd_shift_reg<7>
----------------
    Async-reset: rst


txd_shift_reg<5>
----------------
    Async-reset: rst


txd_shift_reg<1>
----------------
    Async-reset: rst


txd_shift_reg<0>
----------------
    Async-reset: rst


txd_shift_reg<4>
----------------
    Async-reset: rst


txd_shift_reg<6>
----------------
    Async-reset: rst


txd_shift_reg<2>
----------------
    Async-reset: rst


Writing to hnl file 'c:\COP2000P\XCV200\RS232\rs232/workdirs/WORK/RS232.hnl'