fwlib.ewp

定时打铃控制器

        <option>
          <name>AsmObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>AsmOutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>AsmUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>AsmExtraOptions</name>
          <state></state>
        </option>
      </data>
    </settings>
    <settings>
      <name>OBJCOPY</name>
      <archiveVersion>0</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OOCOutputFormat</name>
          <version>2</version>
          <state>0</state>
        </option>
        <option>
          <name>OCOutputOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>OOCOutputFile</name>
          <state></state>
        </option>
        <option>
          <name>OOCCommandLineProducer</name>
          <state>1</state>
        </option>
        <option>
          <name>OOCObjCopyEnable</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>CUSTOM</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <extensions></extensions>
        <cmdline></cmdline>
      </data>
    </settings>
    <settings>
      <name>BICOMP</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
    <settings>
      <name>BUILDACTION</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <prebuild></prebuild>
        <postbuild></postbuild>
      </data>
    </settings>
    <settings>
      <name>ILINK</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IlinkLibIOConfig</name>
          <state>1</state>
        </option>
        <option>
          <name>XLinkMisraHandler</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkInputFileSlave</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkOutputFile</name>
          <state>FWLib.out</state>
        </option>
        <option>
          <name>IlinkDebugInfoEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkKeepSymbols</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryFile</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySymbol</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySegment</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryAlign</name>
          <state></state>
        </option>
        <option>
          <name>IlinkDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkConfigDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkMapFile</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogFile</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogInitialization</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogModule</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogSection</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogVeneer</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfFile</name>
          <state>lnk0t.icf</state>
        </option>
        <option>
          <name>IlinkIcfFileSlave</name>
          <state></state>
        </option>
        <option>
          <name>IlinkEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkSuppressDiags</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsRem</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsWarn</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsErr</name>
          <state></state>
        </option>
        <option>
          <name>IlinkWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkStackSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkHeapSize</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>IlinkAutoLibEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkAdditionalLibs</name>
          <state></state>
        </option>
        <option>
          <name>IlinkOverrideProgramEntryLabel</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabelSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabel</name>
          <state></state>
        </option>
        <option>
          <name>DoFill</name>
          <state>0</state>
        </option>
        <option>
          <name>FillerByte</name>
          <state>0xFF</state>
        </option>
        <option>
          <name>FillerStart</name>
          <state>0x0</state>
        </option>
        <option>
          <name>FillerEnd</name>
          <state>0x0</state>
        </option>
        <option>
          <name>CrcSize</name>
          <version>0</version>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlign</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcAlgo</name>
          <state>1</state>
        </option>
        <option>
          <name>CrcPoly</name>
          <state>0x11021</state>
        </option>
        <option>
          <name>CrcCompl</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcBitOrder</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>CrcInitialValue</name>
          <state>0x0</state>
        </option>
        <option>
          <name>DoCrc</name>
          <state>0</state>
        </option>
        <option>
          <name>CrcFullSize</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkCspyDebugSupportEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkCspyBufferedWrite</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogAutoLibSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogRedirSymbols</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogUnusedFragments</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IARCHIVE</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IarchiveInputs</name>
          <state></state>
        </option>
        <option>
          <name>IarchiveOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IarchiveOutput</name>
          <state>D:\Users\Eric\Documents\IAR Embedded Workbench\stm8\examples\ST-LINK\STM8S105C6-Board\Debug\Exe\FWLib.a</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>BILINK</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
  </configuration>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8_TouchSensing_Driver\src\STM8_TSL_RC_API.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8_TouchSensing_Driver\src\STM8_TSL_RC_IODriver.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8_TouchSensing_Driver\src\STM8_TSL_RC_MultiChannelKey.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8_TouchSensing_Driver\src\STM8_TSL_RC_Services.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8_TouchSensing_Driver\src\STM8_TSL_RC_SingleChannelKey.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8_TouchSensing_Driver\src\STM8_TSL_RC_TimerDriver.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_adc1.c</name>
    <excluded>
      <configuration>Debug</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_adc2.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_awu.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_beep.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_can.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_clk.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_exti.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_flash.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_gpio.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_i2c.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_itc.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_iwdg.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_rst.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_spi.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_tim1.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_tim2.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_tim3.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_tim4.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_tim5.c</name>
    <excluded>
      <configuration>Debug</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_tim6.c</name>
    <excluded>
      <configuration>Debug</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_uart1.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_uart2.c</name>
    <excluded>
      <configuration>Debug</configuration>
    </excluded>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_uart3.c</name>
  </file>
  <file>
    <name>$PROJ_DIR$\Libraries\STM8S_StdPeriph_Driver\src\stm8s_wwdg.c</name>
  </file>
</project>