hour.map.rpt
来自「运用vhdl语言编程,是数字逻辑中的电子钟!各模块及源代码都有,适合电信同学使用」· RPT 代码 · 共 348 行 · 第 1/2 页
RPT
348 行
; |addcore:adder| ; 4 (1) ; 0 ; 0 ; 0 ; 4 (1) ; 0 (0) ; 0 (0) ; 4 (1) ; 0 (0) ; |hour|lpm_add_sub:Add1|addcore:adder ; work ;
; |a_csnbuffer:result_node| ; 3 (3) ; 0 ; 0 ; 0 ; 3 (3) ; 0 (0) ; 0 (0) ; 3 (3) ; 0 (0) ; |hour|lpm_add_sub:Add1|addcore:adder|a_csnbuffer:result_node ; work ;
; |lpm_counter:cnt0_rtl_0| ; 5 (0) ; 4 ; 0 ; 0 ; 1 (0) ; 0 (0) ; 4 (0) ; 4 (0) ; 0 (0) ; |hour|lpm_counter:cnt0_rtl_0 ; work ;
; |alt_counter_f10ke:wysi_counter| ; 5 (5) ; 4 ; 0 ; 0 ; 1 (1) ; 0 (0) ; 4 (4) ; 4 (4) ; 0 (0) ; |hour|lpm_counter:cnt0_rtl_0|alt_counter_f10ke:wysi_counter ; work ;
+----------------------------------------+-------------+--------------+-------------+------+--------------+-------------------+------------------+-----------------+------------+--------------------------------------------------------------+--------------+
Note: For table entries with two numbers listed, the numbers in parentheses indicate the number of resources of the given type used by the specific entity alone. The numbers listed outside of parentheses indicate the total resources of the given type used by the specific entity and all of its sub-entities in the hierarchy.
+------------------------------------------------------+
; General Register Statistics ;
+----------------------------------------------+-------+
; Statistic ; Value ;
+----------------------------------------------+-------+
; Total registers ; 8 ;
; Number of registers using Synchronous Clear ; 4 ;
; Number of registers using Synchronous Load ; 0 ;
; Number of registers using Asynchronous Clear ; 0 ;
; Number of registers using Asynchronous Load ; 0 ;
; Number of registers using Clock Enable ; 8 ;
; Number of registers using Preset ; 0 ;
+----------------------------------------------+-------+
+-----------------------------------------------+
; Source assignments for lpm_counter:cnt0_rtl_0 ;
+---------------------------+-------+------+----+
; Assignment ; Value ; From ; To ;
+---------------------------+-------+------+----+
; SUPPRESS_DA_RULE_INTERNAL ; a101 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s102 ; - ; - ;
; SUPPRESS_DA_RULE_INTERNAL ; s103 ; - ; - ;
+---------------------------+-------+------+----+
+-------------------------------------------------------+
; Source assignments for lpm_add_sub:Add1|addcore:adder ;
+---------------------------+-------+------+------------+
; Assignment ; Value ; From ; To ;
+---------------------------+-------+------+------------+
; SUPPRESS_DA_RULE_INTERNAL ; A103 ; - ; - ;
+---------------------------+-------+------+------------+
+-------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:cnt0_rtl_0 ;
+------------------------+-------------------+----------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------------+----------------------------+
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
; LPM_WIDTH ; 4 ; Untyped ;
; LPM_DIRECTION ; UP ; Untyped ;
; LPM_MODULUS ; 0 ; Untyped ;
; LPM_AVALUE ; UNUSED ; Untyped ;
; LPM_SVALUE ; UNUSED ; Untyped ;
; LPM_PORT_UPDOWN ; PORT_CONNECTIVITY ; Untyped ;
; DEVICE_FAMILY ; FLEX10K ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; NOT_GATE_PUSH_BACK ; ON ; NOT_GATE_PUSH_BACK ;
; CARRY_CNT_EN ; SMART ; Untyped ;
; LABWIDE_SCLR ; ON ; Untyped ;
; USE_NEW_VERSION ; TRUE ; Untyped ;
; CBXI_PARAMETER ; NOTHING ; Untyped ;
+------------------------+-------------------+----------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+-------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_add_sub:Add1 ;
+------------------------+-------------+----------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------+----------------------------+
; LPM_WIDTH ; 4 ; Untyped ;
; LPM_REPRESENTATION ; UNSIGNED ; Untyped ;
; LPM_DIRECTION ; ADD ; Untyped ;
; ONE_INPUT_IS_CONSTANT ; NO ; Untyped ;
; LPM_PIPELINE ; 0 ; Untyped ;
; MAXIMIZE_SPEED ; 5 ; Untyped ;
; REGISTERED_AT_END ; 0 ; Untyped ;
; OPTIMIZE_FOR_SPEED ; 1 ; Untyped ;
; USE_CS_BUFFERS ; 1 ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; DEVICE_FAMILY ; FLEX10K ; Untyped ;
; USE_WYS ; OFF ; Untyped ;
; STYLE ; FAST ; Untyped ;
; CBXI_PARAMETER ; add_sub_njh ; Untyped ;
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
+------------------------+-------------+----------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+-------------------------------+
; Analysis & Synthesis Messages ;
+-------------------------------+
Info: *******************************************************************
Info: Running Quartus II Analysis & Synthesis
Info: Version 7.2 Build 151 09/26/2007 SJ Full Version
Info: Processing started: Tue Nov 27 13:36:49 2007
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off hour -c hour
Warning: Using design file hour.vhd, which is not specified as a design file for the current project, but contains definitions for 2 design units and 1 entities in project
Info: Found design unit 1: hour-hour_arc
Info: Found entity 1: hour
Info: Elaborating entity "hour" for the top level hierarchy
Info: Inferred 1 megafunctions from design logic
Info: Inferred lpm_counter megafunction (LPM_WIDTH=4) from the following logic: "cnt0[0]~12"
Info: Inferred 1 megafunctions from design logic
Info: Inferred adder/subtractor megafunction ("lpm_add_sub") from the following logic: "Add1"
Info: Found 1 design units, including 1 entities, in source file ../libraries/megafunctions/lpm_counter.tdf
Info: Found entity 1: lpm_counter
Info: Elaborated megafunction instantiation "lpm_counter:cnt0_rtl_0"
Info: Found 1 design units, including 1 entities, in source file ../libraries/megafunctions/alt_counter_f10ke.tdf
Info: Found entity 1: alt_counter_f10ke
Info: Elaborated megafunction instantiation "lpm_counter:cnt0_rtl_0|alt_counter_f10ke:wysi_counter", which is child of megafunction instantiation "lpm_counter:cnt0_rtl_0"
Info: Instantiated megafunction "lpm_counter:cnt0_rtl_0" with the following parameter:
Info: Parameter "LPM_WIDTH" = "4"
Info: Parameter "LPM_DIRECTION" = "UP"
Info: Parameter "LPM_TYPE" = "LPM_COUNTER"
Info: Found 1 design units, including 1 entities, in source file ../libraries/megafunctions/lpm_add_sub.tdf
Info: Found entity 1: lpm_add_sub
Info: Elaborated megafunction instantiation "lpm_add_sub:Add1"
Info: Found 1 design units, including 1 entities, in source file ../libraries/megafunctions/addcore.tdf
Info: Found entity 1: addcore
Info: Elaborated megafunction instantiation "lpm_add_sub:Add1|addcore:adder", which is child of megafunction instantiation "lpm_add_sub:Add1"
Info: Instantiated megafunction "lpm_add_sub:Add1" with the following parameter:
Info: Parameter "LPM_WIDTH" = "4"
Info: Parameter "LPM_DIRECTION" = "ADD"
Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
Info: Parameter "ONE_INPUT_IS_CONSTANT" = "NO"
Info: Found 1 design units, including 1 entities, in source file ../libraries/megafunctions/a_csnbuffer.tdf
Info: Found entity 1: a_csnbuffer
Info: Elaborated megafunction instantiation "lpm_add_sub:Add1|addcore:adder|a_csnbuffer:oflow_node", which is child of megafunction instantiation "lpm_add_sub:Add1"
Info: Instantiated megafunction "lpm_add_sub:Add1" with the following parameter:
Info: Parameter "LPM_WIDTH" = "4"
Info: Parameter "LPM_DIRECTION" = "ADD"
Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
Info: Parameter "ONE_INPUT_IS_CONSTANT" = "NO"
Info: Elaborated megafunction instantiation "lpm_add_sub:Add1|addcore:adder|a_csnbuffer:result_node", which is child of megafunction instantiation "lpm_add_sub:Add1"
Info: Instantiated megafunction "lpm_add_sub:Add1" with the following parameter:
Info: Parameter "LPM_WIDTH" = "4"
Info: Parameter "LPM_DIRECTION" = "ADD"
Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
Info: Parameter "ONE_INPUT_IS_CONSTANT" = "NO"
Info: Found 1 design units, including 1 entities, in source file ../libraries/megafunctions/altshift.tdf
Info: Found entity 1: altshift
Info: Elaborated megafunction instantiation "lpm_add_sub:Add1|altshift:result_ext_latency_ffs", which is child of megafunction instantiation "lpm_add_sub:Add1"
Info: Instantiated megafunction "lpm_add_sub:Add1" with the following parameter:
Info: Parameter "LPM_WIDTH" = "4"
Info: Parameter "LPM_DIRECTION" = "ADD"
Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
Info: Parameter "ONE_INPUT_IS_CONSTANT" = "NO"
Info: Elaborated megafunction instantiation "lpm_add_sub:Add1|altshift:carry_ext_latency_ffs", which is child of megafunction instantiation "lpm_add_sub:Add1"
Info: Instantiated megafunction "lpm_add_sub:Add1" with the following parameter:
Info: Parameter "LPM_WIDTH" = "4"
Info: Parameter "LPM_DIRECTION" = "ADD"
Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
Info: Parameter "ONE_INPUT_IS_CONSTANT" = "NO"
Info: Implemented 26 device resources after synthesis - the final resource count might be different
Info: Implemented 2 input pins
Info: Implemented 8 output pins
Info: Implemented 16 logic cells
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 1 warning
Info: Allocated 156 megabytes of memory during processing
Info: Processing ended: Tue Nov 27 13:36:57 2007
Info: Elapsed time: 00:00:08
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?