📄 avcodec.h
字号:
/*
* copyright (c) 2001 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef AVCODEC_H
#define AVCODEC_H
/**
* @file avcodec.h
* external api header.
*/
#ifdef __cplusplus
extern "C" {
#endif
#include "avutil.h"
#define AV_STRINGIFY(s) AV_TOSTRING(s)
#define AV_TOSTRING(s) #s
#define LIBAVCODEC_VERSION_INT ((51<<16)+(21<<8)+0)
#define LIBAVCODEC_VERSION 51.21.0
#define LIBAVCODEC_BUILD LIBAVCODEC_VERSION_INT
#define LIBAVCODEC_IDENT "Lavc" AV_STRINGIFY(LIBAVCODEC_VERSION)
enum CodecID {
CODEC_ID_NONE,
CODEC_ID_H264,
};
/* CODEC_ID_MP3LAME is absolete */
#define CODEC_ID_MP3LAME CODEC_ID_MP3
enum CodecType {
CODEC_TYPE_UNKNOWN = -1,
CODEC_TYPE_VIDEO,
CODEC_TYPE_AUDIO,
CODEC_TYPE_DATA,
CODEC_TYPE_SUBTITLE,
};
/* currently unused, may be used if 24/32 bits samples ever supported */
/* all in native endian */
enum SampleFormat {
SAMPLE_FMT_NONE = -1,
SAMPLE_FMT_U8, ///< unsigned 8 bits
SAMPLE_FMT_S16, ///< signed 16 bits
SAMPLE_FMT_S24, ///< signed 24 bits
SAMPLE_FMT_S32, ///< signed 32 bits
SAMPLE_FMT_FLT, ///< float
};
/* in bytes */
#define AVCODEC_MAX_AUDIO_FRAME_SIZE 192000 // 1 second of 48khz 32bit audio
/**
* Required number of additionally allocated bytes at the end of the input bitstream for decoding.
* this is mainly needed because some optimized bitstream readers read
* 32 or 64 bit at once and could read over the end<br>
* Note, if the first 23 bits of the additional bytes are not 0 then damaged
* MPEG bitstreams could cause overread and segfault
*/
#define FF_INPUT_BUFFER_PADDING_SIZE 8
/**
* minimum encoding buffer size.
* used to avoid some checks during header writing
*/
#define FF_MIN_BUFFER_SIZE 16384
/* motion estimation type, EPZS by default */
enum Motion_Est_ID {
ME_ZERO = 1,
ME_FULL,
ME_LOG,
ME_PHODS,
ME_EPZS,
ME_X1,
ME_HEX,
ME_UMH,
ME_ITER,
};
#define FF_MAX_B_FRAMES 16
/* encoding support
these flags can be passed in AVCodecContext.flags before initing
Note: not everything is supported yet.
*/
#define CODEC_FLAG_QSCALE 0x0002 ///< use fixed qscale
#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / Advanced prediction for H263
#define CODEC_FLAG_QPEL 0x0010 ///< use qpel MC
#define CODEC_FLAG_GMC 0x0020 ///< use GMC
#define CODEC_FLAG_MV0 0x0040 ///< always try a MB with MV=<0,0>
#define CODEC_FLAG_PART 0x0080 ///< use data partitioning
/* parent program gurantees that the input for b-frame containing streams is not written to
for at least s->max_b_frames+1 frames, if this is not set than the input will be copied */
#define CODEC_FLAG_INPUT_PRESERVED 0x0100
#define CODEC_FLAG_PASS1 0x0200 ///< use internal 2pass ratecontrol in first pass mode
#define CODEC_FLAG_PASS2 0x0400 ///< use internal 2pass ratecontrol in second pass mode
#define CODEC_FLAG_EXTERN_HUFF 0x1000 ///< use external huffman table (for mjpeg)
#define CODEC_FLAG_EMU_EDGE 0x4000///< don't draw edges
#define CODEC_FLAG_PSNR 0x8000 ///< error[?] variables will be set during encoding
#define CODEC_FLAG_TRUNCATED 0x00010000 /** input bitstream might be truncated at a random location instead
of only at frame boundaries */
#define CODEC_FLAG_NORMALIZE_AQP 0x00020000 ///< normalize adaptive quantization
#define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< use interlaced dct
#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< force low delay
#define CODEC_FLAG_ALT_SCAN 0x00100000 ///< use alternate scan
#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< place global headers in extradata instead of every keyframe
#define CODEC_FLAG_BITEXACT 0x00800000 ///< use only bitexact stuff (except (i)dct)
/* Fx : Flag for h263+ extra options */
#define CODEC_FLAG_H263P_AIC 0x01000000 ///< H263 Advanced intra coding / MPEG4 AC prediction (remove this)
#define CODEC_FLAG_AC_PRED 0x01000000 ///< H263 Advanced intra coding / MPEG4 AC prediction
#define CODEC_FLAG_H263P_UMV 0x02000000 ///< Unlimited motion vector
#define CODEC_FLAG_CBP_RD 0x04000000 ///< use rate distortion optimization for cbp
#define CODEC_FLAG_QP_RD 0x08000000 ///< use rate distortion optimization for qp selectioon
#define CODEC_FLAG_H263P_AIV 0x00000008 ///< H263 Alternative inter vlc
#define CODEC_FLAG_OBMC 0x00000001 ///< OBMC
#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
#define CODEC_FLAG_H263P_SLICE_STRUCT 0x10000000
#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
#define CODEC_FLAG_SVCD_SCAN_OFFSET 0x40000000 ///< will reserve space for SVCD scan offset user data
#define CODEC_FLAG_CLOSED_GOP ((int)0x80000000)
#define CODEC_FLAG2_FAST 0x00000001 ///< allow non spec compliant speedup tricks
#define CODEC_FLAG2_STRICT_GOP 0x00000002 ///< strictly enforce GOP size
#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< skip bitstream encoding
#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< place global headers at every keyframe instead of in extradata
#define CODEC_FLAG2_BPYRAMID 0x00000010 ///< H.264 allow b-frames to be used as references
#define CODEC_FLAG2_WPRED 0x00000020 ///< H.264 weighted biprediction for b-frames
#define CODEC_FLAG2_MIXED_REFS 0x00000040 ///< H.264 multiple references per partition
#define CODEC_FLAG2_8X8DCT 0x00000080 ///< H.264 high profile 8x8 transform
#define CODEC_FLAG2_FASTPSKIP 0x00000100 ///< H.264 fast pskip
#define CODEC_FLAG2_AUD 0x00000200 ///< H.264 access unit delimiters
#define CODEC_FLAG2_BRDO 0x00000400 ///< b-frame rate-distortion optimization
#define CODEC_FLAG2_INTRA_VLC 0x00000800 ///< use MPEG-2 intra VLC table
#define CODEC_FLAG2_MEMC_ONLY 0x00001000 ///< only do ME/MC (I frames -> ref, P frame -> ME+MC)
/* Unsupported options :
* Syntax Arithmetic coding (SAC)
* Reference Picture Selection
* Independant Segment Decoding */
/* /Fx */
/* codec capabilities */
#define CODEC_CAP_DRAW_HORIZ_BAND 0x0001 ///< decoder can use draw_horiz_band callback
/**
* Codec uses get_buffer() for allocating buffers.
* direct rendering method 1
*/
#define CODEC_CAP_DR1 0x0002
#define CODEC_CAP_PARSE_ONLY 0x0004
#define CODEC_CAP_TRUNCATED 0x0008
/* codec can export data for HW decoding (XvMC) */
#define CODEC_CAP_HWACCEL 0x0010
/**
* codec has a non zero delay and needs to be feeded with NULL at the end to get the delayed data.
* if this is not set, the codec is guranteed to never be feeded with NULL data
*/
#define CODEC_CAP_DELAY 0x0020
/**
* Codec can be fed a final frame with a smaller size.
* This can be used to prevent truncation of the last audio samples.
*/
#define CODEC_CAP_SMALL_LAST_FRAME 0x0040
//the following defines may change, don't expect compatibility if you use them
#define MB_TYPE_INTRA4x4 0x0001
#define MB_TYPE_INTRA16x16 0x0002 //FIXME h264 specific
#define MB_TYPE_INTRA_PCM 0x0004 //FIXME h264 specific
#define MB_TYPE_16x16 0x0008
#define MB_TYPE_16x8 0x0010
#define MB_TYPE_8x16 0x0020
#define MB_TYPE_8x8 0x0040
#define MB_TYPE_INTERLACED 0x0080
#define MB_TYPE_DIRECT2 0x0100 //FIXME
#define MB_TYPE_ACPRED 0x0200
#define MB_TYPE_GMC 0x0400
#define MB_TYPE_SKIP 0x0800
#define MB_TYPE_P0L0 0x1000
#define MB_TYPE_P1L0 0x2000
#define MB_TYPE_P0L1 0x4000
#define MB_TYPE_P1L1 0x8000
#define MB_TYPE_L0 (MB_TYPE_P0L0 | MB_TYPE_P1L0)
#define MB_TYPE_L1 (MB_TYPE_P0L1 | MB_TYPE_P1L1)
#define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
#define MB_TYPE_QUANT 0x00010000
#define MB_TYPE_CBP 0x00020000
//Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
#define FF_COMMON_FRAME \
/**\
* pointer to the picture planes.\
* this might be different from the first allocated byte\
* - encoding: \
* - decoding: \
*/\
uint8_t *data[4];\
int linesize[4];\
/**\
* pointer to the first allocated byte of the picture. can be used in get_buffer/release_buffer\
* this isn't used by lavc unless the default get/release_buffer() is used\
* - encoding: \
* - decoding: \
*/\
uint8_t *base[4];\
/**\
* 1 -> keyframe, 0-> not\
* - encoding: set by lavc\
* - decoding: set by lavc\
*/\
int key_frame;\
\
/**\
* picture type of the frame, see ?_TYPE below.\
* - encoding: set by lavc for coded_picture (and set by user for input)\
* - decoding: set by lavc\
*/\
int pict_type;\
\
/**\
* picture number in display order.\
* - encoding: set by\
* - decoding: set by lavc\
*/\
int display_picture_number;\
\
/**\
* buffer age (1->was last buffer and dint change, 2->..., ...).\
* set to INT_MAX if the buffer has not been used yet \
* - encoding: unused\
* - decoding: MUST be set by get_buffer()\
*/\
int age;\
\
/**\
* is this picture used as reference\
* - encoding: unused\
* - decoding: set by lavc (before get_buffer() call))\
*/\
int reference;\
\
/**\
* QP table\
* - encoding: unused\
* - decoding: set by lavc\
*/\
int8_t *qscale_table;\
/**\
* QP store stride\
* - encoding: unused\
* - decoding: set by lavc\
*/\
int qstride;\
\
/**\
* Motion vector table.\
* @code\
* example:\
* int mv_sample_log2= 4 - motion_subsample_log2;\
* int mb_width= (width+15)>>4;\
* int mv_stride= (mb_width << mv_sample_log2) + 1;\
* motion_val[direction][x + y*mv_stride][0->mv_x, 1->mv_y];\
* @endcode\
* - encoding: set by user\
* - decoding: set by lavc\
*/\
int16_t (*motion_val[2])[2];\
\
/**\
* Macroblock type table\
* mb_type_base + mb_width + 2\
* - encoding: set by user\
* - decoding: set by lavc\
*/\
uint32_t *mb_type;\
\
/**\
* log2 of the size of the block which a single vector in motion_val represents: \
* (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2)\
* - encoding: unused\
* - decoding: set by lavc\
*/\
uint8_t motion_subsample_log2;\
\
/**\
* for some private data of the user\
* - encoding: unused\
* - decoding: set by user\
*/\
void *opaque;\
\
/**\
* type of the buffer (to keep track of who has to dealloc data[*])\
* - encoding: set by the one who allocs it\
* - decoding: set by the one who allocs it\
* Note: user allocated (direct rendering) & internal buffers can not coexist currently\
*/\
int type;\
\
/**\
* when decoding, this signal how much the picture must be delayed.\
* extra_delay = repeat_pict / (2*fps)\
* - encoding: unused\
* - decoding: set by lavc\
*/\
int repeat_pict;\
\
/**\
* The content of the picture is interlaced.\
* - encoding: set by user\
* - decoding: set by lavc (default 0)\
*/\
int interlaced_frame;\
\
/**\
* DCT coeffitients\
* - encoding: unused\
* - decoding: set by lavc\
*/\
short *dct_coeff;\
\
/**\
* Motion referece frame index\
* - encoding: set by user\
* - decoding: set by lavc\
*/\
int8_t *ref_index[2];
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -