bgp4-mib.txt

xorp源码hg

BGP4-MIB DEFINITIONS ::= BEGIN

                IMPORTS
                    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
                    IpAddress, Integer32, Counter32, Gauge32
                        FROM SNMPv2-SMI
                    mib-2
                        FROM RFC1213-MIB;

                bgp MODULE-IDENTITY
                    LAST-UPDATED "9405050000Z"
                    ORGANIZATION "IETF BGP Working Group"
                    CONTACT-INFO
                                "   John Chu  (Editor)
                            Postal: IBM Corp.
                                    P.O.Box 218
                                    Yorktown Heights, NY 10598
                                    US

                               Tel: [phone]
                               Fax: [phone]
                            E-mail: [e-mail]"
                        DESCRIPTION
                                "The MIB module for BGP-4."
                    ::= { mib-2 15 }

                bgpVersion OBJECT-TYPE
                    SYNTAX     OCTET STRING (SIZE (1..255))
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "Vector of supported BGP protocol version
                            numbers.  Each peer negotiates the version
                            from this vector.  Versions are identified
                            via the string of bits contained within this
                            object.  The first octet contains bits 0 to
                            7, the second octet contains bits 8 to 15,
                            and so on, with the most significant bit
                            referring to the lowest bit number in the
                            octet (e.g., the MSB of the first octet
                            refers to bit 0).  If a bit, i, is present
                            and set, then the version (i+1) of the BGP
                            is supported."
                    ::= { bgp 1 }

                bgpLocalAs OBJECT-TYPE
                    SYNTAX     INTEGER (0..65535)
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The local autonomous system number."
                    ::= { bgp 2 }



                -- BGP Peer table.  This table contains, one entry per
                -- BGP peer, information about the BGP peer.

                bgpPeerTable OBJECT-TYPE
                    SYNTAX     SEQUENCE OF BgpPeerEntry
                    MAX-ACCESS not-accessible
                    STATUS     current
                    DESCRIPTION
                            "BGP peer table.  This table contains,
                            one entry per BGP peer, information about
                            the connections with BGP peers."
                    ::= { bgp 3 }
                bgpPeerEntry OBJECT-TYPE
                    SYNTAX     BgpPeerEntry
                    MAX-ACCESS not-accessible
                    STATUS     current
                    DESCRIPTION
                            "Entry containing information about the
                            connection with a BGP peer."
                    INDEX { bgpPeerRemoteAddr }
                    ::= { bgpPeerTable 1 }

                BgpPeerEntry ::= SEQUENCE {
                        bgpPeerIdentifier
                            IpAddress,
                        bgpPeerState
                            INTEGER,
                        bgpPeerAdminStatus
                            INTEGER,
                        bgpPeerNegotiatedVersion
                            Integer32,
                        bgpPeerLocalAddr
                            IpAddress,
                        bgpPeerLocalPort
                            INTEGER,
                        bgpPeerRemoteAddr
                            IpAddress,
                        bgpPeerRemotePort
                            INTEGER,
                        bgpPeerRemoteAs
                            INTEGER,
                        bgpPeerInUpdates
                            Counter32,
                        bgpPeerOutUpdates
                            Counter32,
                        bgpPeerInTotalMessages
                            Counter32,
                        bgpPeerOutTotalMessages
                            Counter32,
                        bgpPeerLastError
                            OCTET STRING,
                        bgpPeerFsmEstablishedTransitions
                            Counter32,
                        bgpPeerFsmEstablishedTime
                            Gauge32,
                        bgpPeerConnectRetryInterval
                            INTEGER,
                        bgpPeerHoldTime
                            INTEGER,
                        bgpPeerKeepAlive
                            INTEGER,
                        bgpPeerHoldTimeConfigured
                            INTEGER,
                        bgpPeerKeepAliveConfigured
                            INTEGER,
                        bgpPeerMinASOriginationInterval
                            INTEGER,
                        bgpPeerMinRouteAdvertisementInterval
                            INTEGER,
                        bgpPeerInUpdateElapsedTime
                            Gauge32
                        }

                bgpPeerIdentifier OBJECT-TYPE
                    SYNTAX     IpAddress
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The BGP Identifier of this entry's BGP
                            peer."
                    ::= { bgpPeerEntry 1 }

                bgpPeerState OBJECT-TYPE
                    SYNTAX     INTEGER {
                                        idle(1),
                                        connect(2),
                                        active(3),
                                        opensent(4),
                                        openconfirm(5),
                                        established(6)
                               }
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The BGP peer connection state."
                    ::= { bgpPeerEntry 2 }

                bgpPeerAdminStatus OBJECT-TYPE
                    SYNTAX     INTEGER {
                                        stop(1),
                                        start(2)
                               }
                    MAX-ACCESS read-write
                    STATUS     current
                    DESCRIPTION
                            "The desired state of the BGP connection.
                            A transition from 'stop' to 'start' will
                            cause the BGP Start Event to be generated.
                            A transition from 'start' to 'stop' will
                            cause the BGP Stop Event to be generated.
                            This parameter can be used to restart BGP
                            peer connections.  Care should be used in
                            providing write access to this object
                            without adequate authentication."
                    ::= { bgpPeerEntry 3 }

                bgpPeerNegotiatedVersion OBJECT-TYPE
                    SYNTAX     Integer32
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The negotiated version of BGP running
                            between the two peers."
                    ::= { bgpPeerEntry 4 }

                bgpPeerLocalAddr OBJECT-TYPE
                    SYNTAX     IpAddress
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The local IP address of this entry's BGP
                            connection."
                    ::= { bgpPeerEntry 5 }

                bgpPeerLocalPort OBJECT-TYPE
                    SYNTAX     INTEGER (0..65535)
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The local port for the TCP connection
                            between the BGP peers."
                    ::= { bgpPeerEntry 6 }

                bgpPeerRemoteAddr OBJECT-TYPE
                    SYNTAX     IpAddress
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The remote IP address of this entry's BGP
                            peer."
                    ::= { bgpPeerEntry 7 }

                bgpPeerRemotePort OBJECT-TYPE
                    SYNTAX     INTEGER (0..65535)
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The remote port for the TCP connection
                            between the BGP peers.  Note that the
                            objects bgpPeerLocalAddr,
                            bgpPeerLocalPort, bgpPeerRemoteAddr and
                            bgpPeerRemotePort provide the appropriate
                            reference to the standard MIB TCP
                            connection table."
                    ::= { bgpPeerEntry 8 }

                bgpPeerRemoteAs OBJECT-TYPE
                    SYNTAX     INTEGER (0..65535)
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The remote autonomous system number."
                    ::= { bgpPeerEntry 9 }

                bgpPeerInUpdates OBJECT-TYPE
                    SYNTAX     Counter32
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The number of BGP UPDATE messages
                            received on this connection.  This object
                            should be initialized to zero (0) when the
                            connection is established."
                    ::= { bgpPeerEntry 10 }

                bgpPeerOutUpdates OBJECT-TYPE
                    SYNTAX     Counter32
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The number of BGP UPDATE messages
                            transmitted on this connection.  This
                            object should be initialized to zero (0)
                            when the connection is established."
                    ::= { bgpPeerEntry 11 }

                bgpPeerInTotalMessages OBJECT-TYPE
                    SYNTAX     Counter32
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The total number of messages received
                            from the remote peer on this connection.
                            This object should be initialized to zero
                            when the connection is established."
                    ::= { bgpPeerEntry 12 }

                bgpPeerOutTotalMessages OBJECT-TYPE
                    SYNTAX     Counter32
                    MAX-ACCESS read-only
                    STATUS     current
                    DESCRIPTION
                            "The total number of messages transmitted to
                            the remote peer on this connection.  This
                            object should be initialized to zero when
                            the connection is established."
                    ::= { bgpPeerEntry 13 }