ospfv3_base.hh

xorp源码hg

	const IPv6&	neighbour_address,
	const IPv4&	neighbour_id) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Remove a neighbour from the peer.
     */
    virtual XrlCmdError ospfv3_0_1_remove_neighbour(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const IPv6&	neighbour_address,
	const IPv4&	neighbour_id) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Create a virtual link.
     *
     *  @param neighbour_id the router ID of the other end of the link.
     *
     *  @param area in which an attempt has been made to configure a virtual
     *  link it has to be the backbone. Its just being passed in so it can be
     *  checked by the protocol.
     */
    virtual XrlCmdError ospfv3_0_1_create_virtual_link(
	// Input values,
	const IPv4&	neighbour_id,
	const IPv4&	area) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Delete virtual link
     *
     *  @param neighbour_id the router ID of the other end of the link.
     */
    virtual XrlCmdError ospfv3_0_1_delete_virtual_link(
	// Input values,
	const IPv4&	neighbour_id) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  The area through which the virtual link transits.
     *
     *  @param neighbour_id the router ID of the other end of the link.
     *
     *  @param transit_area that the virtual link transits.
     */
    virtual XrlCmdError ospfv3_0_1_transit_area_virtual_link(
	// Input values,
	const IPv4&	neighbour_id,
	const IPv4&	transit_area) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  The edge cost of this interface.
     */
    virtual XrlCmdError ospfv3_0_1_set_interface_cost(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const uint32_t&	cost) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  RxmtInterval The number of seconds between LSA retransmissions, for
     *  adjacencies belonging to this interface. Also used when retransmitting
     *  Database Description and Link State Request Packets. This should be
     *  well over the expected round-trip delay between any two routers on the
     *  attached network. The setting of this value should be conservative or
     *  needless retransmissions will result. Sample value for a local area
     *  network: 5 seconds.
     */
    virtual XrlCmdError ospfv3_0_1_set_retransmit_interval(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const uint32_t&	interval) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  The estimated number of seconds it takes to transmit a Link State
     *  Update Packet over this interface. LSAs contained in the Link State
     *  Update packet will have their age incremented by this amount before
     *  transmission. This value should take into account transmission and
     *  propagation delays; it must be greater than zero.
     */
    virtual XrlCmdError ospfv3_0_1_set_inftransdelay(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const uint32_t&	delay) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Used in the designated router election.
     */
    virtual XrlCmdError ospfv3_0_1_set_router_priority(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const uint32_t&	priority) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  The interval between hello messages.
     */
    virtual XrlCmdError ospfv3_0_1_set_hello_interval(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const uint32_t&	interval) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  The period to wait before considering a router dead.
     */
    virtual XrlCmdError ospfv3_0_1_set_router_dead_interval(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const uint32_t&	interval) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Toggle the passive status of an interface.
     */
    virtual XrlCmdError ospfv3_0_1_set_passive(
	// Input values,
	const string&	ifname,
	const string&	vifname,
	const IPv4&	area,
	const bool&	passive) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  If this is a "stub" or "nssa" area toggle the sending of a default
     *  route.
     */
    virtual XrlCmdError ospfv3_0_1_originate_default_route(
	// Input values,
	const IPv4&	area,
	const bool&	enable) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Set the StubDefaultCost, the default cost sent in a default route in a
     *  "stub" or "nssa" area.
     */
    virtual XrlCmdError ospfv3_0_1_stub_default_cost(
	// Input values,
	const IPv4&	area,
	const uint32_t&	cost) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Toggle the sending of summaries into "stub" or "nssa" areas.
     */
    virtual XrlCmdError ospfv3_0_1_summaries(
	// Input values,
	const IPv4&	area,
	const bool&	enable) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Add area range.
     */
    virtual XrlCmdError ospfv3_0_1_area_range_add(
	// Input values,
	const IPv4&	area,
	const IPv6Net&	net,
	const bool&	advertise) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Delete area range.
     */
    virtual XrlCmdError ospfv3_0_1_area_range_delete(
	// Input values,
	const IPv4&	area,
	const IPv6Net&	net) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Change the advertised state of this area.
     */
    virtual XrlCmdError ospfv3_0_1_area_range_change_state(
	// Input values,
	const IPv4&	area,
	const IPv6Net&	net,
	const bool&	advertise) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Enable/Disable tracing.
     *
     *  @param tvar trace variable.
     *
     *  @param enable set to true to enable false to disable.
     */
    virtual XrlCmdError ospfv3_0_1_trace(
	// Input values,
	const string&	tvar,
	const bool&	enable) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Get a single lsa from an area. A stateless mechanism to get LSAs. The
     *  client of this interface should start from zero and continue to request
     *  LSAs (incrementing index) until toohigh becomes true.
     *
     *  @param area database that is being searched.
     *
     *  @param index into database starting from 0.
     *
     *  @param valid true if a LSA has been returned. Some index values do not
     *  contain LSAs. This should not be considered an error.
     *
     *  @param toohigh true if no more LSA exist after this index.
     *
     *  @param self if true this LSA was originated by this router.
     *
     *  @param lsa if valid is true the LSA at index.
     */
    virtual XrlCmdError ospfv3_0_1_get_lsa(
	// Input values,
	const IPv4&	area,
	const uint32_t&	index,
	// Output values,
	bool&	valid,
	bool&	toohigh,
	bool&	self,
	vector<uint8_t>&	lsa) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Get a list of all the configured areas. Return a list of u32 type
     *  values. Each value is an area ID.
     */
    virtual XrlCmdError ospfv3_0_1_get_area_list(
	// Output values,
	XrlAtomList&	areas) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Get the list of neighbours. Return a list of u32 type values. Each
     *  value is an internal identifier that can be used with the
     *  get_neighbour_info XRL.
     */
    virtual XrlCmdError ospfv3_0_1_get_neighbour_list(
	// Output values,
	XrlAtomList&	areas) = 0;

    /**
     *  Pure-virtual function that needs to be implemented to:
     *
     *  Get information on a neighbour.
     *
     *  @param nid neighbour ID returned by the get_neighbour_list.
     *
     *  @param address of neighbour in txt to allow IPv4 and IPv6.
     *
     *  @param interface with which the neighbour forms the adjacency.
     *
     *  @param state of the adjacency.
     *
     *  @param rid router ID of the neighbour.
     *
     *  @param priority of the neighbour (used for DR election).
     *
     *  @param deadtime time until neighbour is considered dead.
     *
     *  @param area the neighbour is in.
     *
     *  @param opt value in the neighbours hello packet.
     *
     *  @param dr designated router.
     *
     *  @param bdr backup designated router.
     *
     *  @param up time in seconds that the neigbour has been up.
     *
     *  @param adjacent time in seconds that there has been an adjacency.
     */
    virtual XrlCmdError ospfv3_0_1_get_neighbour_info(
	// Input values,
	const uint32_t&	nid,
	// Output values,
	string&	address,
	string&	interface,
	string&	state,
	IPv4&	rid,
	uint32_t&	priority,
	uint32_t&	deadtime,
	IPv4&	area,
	uint32_t&	opt,
	IPv4&	dr,
	IPv4&	bdr,
	uint32_t&	up,
	uint32_t&	adjacent) = 0;

private:
    const XrlCmdError handle_common_0_1_get_target_name(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_common_0_1_get_version(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_common_0_1_get_status(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_common_0_1_shutdown(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_raw_packet4_client_0_1_recv(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_raw_packet6_client_0_1_recv(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_policy_backend_0_1_configure(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_policy_backend_0_1_reset(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_policy_backend_0_1_push_routes(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_policy_redist6_0_1_add_route6(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_policy_redist6_0_1_delete_route6(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_instance_id(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_router_id(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_ip_router_alert(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_create_area_router(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_change_area_router_type(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_destroy_area_router(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_create_peer(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_delete_peer(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_peer_state(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_add_address_peer(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_remove_address_peer(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_address_state_peer(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_activate_peer(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_update_peer(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_add_neighbour(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_remove_neighbour(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_create_virtual_link(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_delete_virtual_link(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_transit_area_virtual_link(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_interface_cost(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_retransmit_interval(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_inftransdelay(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_router_priority(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_hello_interval(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_router_dead_interval(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_set_passive(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_originate_default_route(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_stub_default_cost(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_summaries(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_area_range_add(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_area_range_delete(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_area_range_change_state(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_trace(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_get_lsa(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_get_area_list(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_get_neighbour_list(const XrlArgs& in, XrlArgs* out);

    const XrlCmdError handle_ospfv3_0_1_get_neighbour_info(const XrlArgs& in, XrlArgs* out);

    void add_handlers();
    void remove_handlers();
};

#endif // __XRL_TARGETS_OSPFV3_BASE_HH__