eurostag2psat

这是一个很适合研究和学习用的电力系统仿真软件

#!/usr/bin/perl -w
# EUROSTAG2PSAT converts EUROSTAG data file into PSAT data file
#
# EUROSTAG2PSAT <OPTIONS> FILEINPUT <FILEOUTPUT>
#
# Author:  Juan Carlos Morataya
# Date:    19-Nov-2005
# Update:  08-Mar-2006
# Version: 1.0.0
# Version: 1.0.1
# 
# E-mail:    [e-mail]
#

use strict;

# -----------------------------------------------------------------------
# variable declaration
# -----------------------------------------------------------------------
my $nargin = 0;
my $verbose = 0;
my $helpmsg = 0;
my ($i,$j,$h,$k);

my $nbus = -1;
my $nsw = -1;
my $npv = -1;
my $npq = -1;
my $npl = -1;
my $nsh = -1;
my $nline = -1;
my $ntitle = -1;
my $ncom = -1;
my $trg = -1;
my $ntw = -1;
my $nsvc = -1;
my $narea = -1;
my $kae = 0;

my ($kvb,$ein,$ang,);
my ($swidx,$qmin,$qmax);
my (@pqbus,@pqpl,@pqql);    
my ($title1,$title2,$ver,);
my $pbas = 100;
my $freq = 60;
my $format;
my (@data,@data1,@data2,@data3);
my (@kvb,@kzo,@kae,@ein,@ang,@bustype,
    @busidx,@busname,@pload,@qload,@qcap,
    @shidx,@title,@comment,
    @pbtf);
my (@pvbus,@pvsb,@pvpg,@pvvs,
    @pvqt,@pvqb,@pvpt,@pvpb);    
my (@swidx,@pvidx,@pqidx,@idxsh,
    @vmax,@vmin,@psh,@qsh);
my (@busfr,@bustt,@rest,@reat,
    @susc,@rate,@ratio);	    
my (@areanum,@areaslack,@areaexp,@areatol);
my (@pgen,@qgen,@bsh,@gsh,@qmax,@qmin,@gename);
my $blanks = " " x 100;
my (%kvbase,%nameidx);

# -----------------------------------------------------------------------
# check inputs
# -----------------------------------------------------------------------
$nargin = @ARGV;
$nargin || die "Error: No input data file.\n";

# -----------------------------------------------------------------------
# check options
# -----------------------------------------------------------------------
while ($ARGV[0] =~ /^-/) {
    if ($ARGV[0] =~ /v/) {$verbose = 1;}
    if ($ARGV[0] =~ /h/) {$helpmsg = 1;}
    shift(@ARGV);
    $nargin--;
    if ($nargin == 0) { 
	last;
    }
}

# -----------------------------------------------------------------------
# help (if requested)
# -----------------------------------------------------------------------
if ($helpmsg) {
    print "\nEUROSTAG2PSAT converts EUROSTAG data files into PSAT data files.\n\n";
    print "EUROSTAG2psat [options] fileinput [fileoutput]\n";
    print "  -v   verbose\n";
    print "  -h   print this help and exit\n\n";
    print "Author:   Juan Carlos Morataya\n";
    print "Date:     19-Nov-2005\n";
    print "Version:  1.0.0\n\n";
    print "E-mail:   jc.morataya\@ieee.org\n";
    die "\n";
}

# -----------------------------------------------------------------------
# define output file name (if necessary)
# -----------------------------------------------------------------------
if ($nargin == 1) {
    $ARGV[1] = $ARGV[0];
    $ARGV[1] =~ s/^/d_/;
    $ARGV[1] =~ s/^d_d/d_/;
    $ARGV[1] =~ s/^d_d_/d_/;
    $ARGV[1] =~ s/[^a-zA-Z0-9_\.]/_/g;
    $ARGV[1] =~ s/\..*//;
    $ARGV[1] =~ s/^d__/d_/;
    $ARGV[1] = $ARGV[1] . ".m";
} elsif ($nargin == 0) {
    die "Error: Input file name is missing.\n";
}

# -----------------------------------------------------------------------
# open input data file
# -----------------------------------------------------------------------
print "Opening EUROSTAG data file \"$ARGV[0]\"...\n";
carret();
open(IN,$ARGV[0]) || die "cannot open $ARGV[0]: $!\n";

# -----------------------------------------------------------------------
# scan data file
# -----------------------------------------------------------------------

# read title
while (<IN>) {
    chomp;
    last if /^B/;
    $ntitle++;
    $title[$ntitle] = $_;
}

# read parameters
while (<IN>) {
    chomp;
    last if /^8/;
}

while (<IN>) {
	if (/^AA/) { $kae++; next; }
    chomp;
    $_ = $_ . $blanks;
    if (/^101/) {  # read bus data
    $nbus++;
    $busidx[$nbus] = $nbus+1;
    $kae[$nbus] = $kae;
    $busname[$nbus] = deblank(substr($_,3,8));
    $pbas = assign($_,84,8,100);
    $pgen[$nbus] = assign($_,30,8,0)/$pbas;
    $qgen[$nbus] = assign($_,54,8,0)/$pbas;
    $pload[$nbus] = assign($_,48,8,0)/$pbas;
    $qload[$nbus] = assign($_,57,8,0)/$pbas;
    if ($pload[$nbus] || $qload[$nbus]) {
	$npq++;
	$pqidx[$npq] = $busidx[$nbus];
    }
    $kvb[$nbus] = assign($_,66,8,1);
    $bsh[$nbus] = assign($_,75,8,0)/$pbas;
    if ($bsh[$nbus]) {
	$nsh++;
	$shidx[$nsh] = $busidx[$nbus];
    }    
    $ein[$nbus] = assign($_,99,7,1);
    $ang[$nbus] = 0.01745329552*assign($_,109,6,0);
    $kvbase{$busidx[$nbus]} = $kvb[$nbus];
    $nameidx{$busname[$nbus]} = $busidx[$nbus];
    }   
    if (/^5\s*/) {  # read pv/sw generator data
    $npv++;
    $gename[$npv] = deblank(substr($_,3,8));
    $qmin[$npv] = assign($_,21,8,-99999.99)/$pbas;
    $qmax[$npv] = assign($_,30,8,99999.99)/$pbas;
    $bustype[$npv] = assign($_,57,1,2);
    if ($bustype[$npv] == 1) {
	$pvidx[$npv] = $nameidx{$gename[$npv]}-1;
    } else {
	$nsw++;
	#my $tempvar = $npv + 1;
	$swidx = $nameidx{$gename[$npv]};
	$qmin = assign($_,21,8,-999.99)/$pbas;
    $qmax = assign($_,30,8,999.99)/$pbas;
	$npv--;
    }   
    } 
    if (/^30/) { # read line data
    $nline++;
    $bustt[$nline] = $nameidx{deblank(substr($_,2,8))};
    $busfr[$nline] = $nameidx{deblank(substr($_,11,8))};
    $rest[$nline] = assign($_,21,8,0);	
    $reat[$nline] = assign($_,30,8,0);	    
    $susc[$nline] = 2*assign($_,48,8,0);
    $ratio[$nline] = 1;
    } 
    if (/^41/) {  # read transformers data
	$nline++;
	$bustt[$nline] = $nameidx{deblank(substr($_,2,8))};
    $busfr[$nline] = $nameidx{deblank(substr($_,11,8))};
    $rest[$nline] = assign($_,21,8,0);	
    $reat[$nline] = assign($_,30,8,0);	    
    $susc[$nline] = 2*assign($_,48,8,0);
    $ratio[$nline] = 2-assign($_,66,8,1);
    }   
}

# -----------------------------------------------------------------------
# close data file
# -----------------------------------------------------------------------
close(IN) || die "cannot close $ARGV[0]: $!\n";

# -----------------------------------------------------------------------
# open output data file
# -----------------------------------------------------------------------
print "Writing PSAT file \"$ARGV[1]\"...\n";
carret();
open(OUT,">$ARGV[1]") || die "cannot open $ARGV[1]: $!\n";

# -----------------------------------------------------------------------
# write output data file
# -----------------------------------------------------------------------
print OUT "% File EUROSTAGnerated by PSAT from EUROSTAG data file.\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% Author:   Juan Carlos Morataya\n";
print OUT "% E-mail:   jc.morataya\@ieee.org\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% 'EUROSTAGneric EUROSTAG data format "."$ARGV[0]'"."\n";
for ($i = 0; $i <= $ntitle; $i++) { print OUT "% $title[$i]\n"; }
print OUT "\n";

# -----------------------------------------------------------------------
# write Bus.con
# -----------------------------------------------------------------------
$format = "%4d  " . " %8.5f " x 3 ." %2d  1";
$nbus >= 0 && print OUT "Bus.con = [ ...\n";

for ($i = 0; $i <= $nbus-1; $i++) {
    printf OUT "$format;\n",$busidx[$i],$kvb[$i],$ein[$i],
    $ang[$i],$kae[$i];
}

$nbus >= 0 && printf OUT "$format];\n\n",$busidx[$i],$kvb[$i],
    $ein[$i],$ang[$i],$kae[$i];

# -----------------------------------------------------------------------
# write SW.con
# -----------------------------------------------------------------------
if ($nsw >= 0) {
    print OUT "SW.con = [ ...\n";
    $format = "%4d  $pbas 1 %8.5f  0  %8.5f  %8.5f  1.1  0.9  %8.5f   1 ";
    $i = $swidx;
    $h = $swidx-1;
    printf OUT "$format];\n\n",$swidx,$ein[$h],$qmax,
    $qmin,$pgen[$h];
}

# -----------------------------------------------------------------------
# write PV.con
# -----------------------------------------------------------------------
if ($npv >= 0) {
    print OUT "PV.con = [ ...\n";
    $format = "%4d  $pbas   1  " . "%8.5f " x 4 . "   1.1   0.9   1";
    for ($i = 0; $i <= $npv-1; $i++) {
	$h = $pvidx[$i];
	printf OUT "$format;\n", $busidx[$h],$pgen[$h],$ein[$h],
	$qmax[$i],$qmin[$i];
    }
    $h = $pvidx[$npv]; 
    printf OUT "$format];\n\n",$busidx[$h],$pgen[$h],$ein[$h],
	$qmax[$i],$qmin[$i];
}

# -----------------------------------------------------------------------
# write PQ.con
# -----------------------------------------------------------------------
if ($npq >= 0) {
    print OUT "PQ.con = [ ...\n";
    $format = "%4d  $pbas   1  " . "%8.5f " x 2 . "  1.1   0.9   1";
    for ($i = 0; $i <= $npq-1; $i++) {
	$h = $pqidx[$i]-1;
	printf OUT "$format;\n", $busidx[$h],$pload[$h],$qload[$h];
    }
    $h = $pqidx[$npq]-1; 
    printf OUT "$format];\n\n",$busidx[$h],$pload[$h],$qload[$h];
}

# -----------------------------------------------------------------------
# write Shunt.con
# -----------------------------------------------------------------------
if ($nsh >= 0) {
    print OUT "Shunt.con = [ ...\n";
    $format = "%4d  $pbas  %8.5f  60  0  %8.5f";
    for ($i = 0; $i <= $nsh-1; $i++) {
	$h = $shidx[$i]-1;
	printf OUT "$format;\n", $busidx[$h],$kvbase{$busidx[$h]},
	$bsh[$h];
    }
    $h = $shidx[$nsh]-1;
    printf OUT "$format];\n\n", $busidx[$h],$kvbase{$busidx[$h]},
    $bsh[$h];
}

# -----------------------------------------------------------------------
# write Line.con
# -----------------------------------------------------------------------
if ($nline >= 0) {
    print OUT "Line.con = [ ...\n";
    $format = "%4d %4d " . " %8.5f " x 2 ."  60   0 " . " %8.5f " x 5 . 
    " 0  0  0  0";
    for ($i = 0; $i <= $nline-1; $i++) {
    $k = $kvbase{$busfr[$i]}/$kvbase{$bustt[$i]};
    if ($k == 1) { $k = 0; }
    printf OUT "$format;\n",$busfr[$i],$bustt[$i],$pbas,$kvbase{$busfr[$i]},
	$k,$rest[$i],$reat[$i],$susc[$i],$ratio[$i];
    }
    $i = $nline; 
    $k = $kvbase{$busfr[$i]}/$kvbase{$bustt[$i]};
    if ($k == 1) { $k = 0; }
    printf OUT "$format];\n\n",$busfr[$i],$bustt[$i],$pbas,$kvbase{$busfr[$i]},
	$k,$rest[$i],$reat[$i],$susc[$i],$ratio[$i];
}    


# -----------------------------------------------------------------------
# write Varname.bus
# -----------------------------------------------------------------------
$nbus >= 0 && print OUT "Varname.bus = { ...\n";
$h = ($nbus+1) % 5;
if ($h == 0) {$h = 5;}
if (($nbus+1) > 5) {
    for ($i = 0; $i <= $nbus-$h; $i+=5) {
	print OUT "  '$busname[$i]'; '$busname[$i+1]'; " . 
	    "'$busname[$i+2]'; '$busname[$i+3]'; '$busname[$i+4]';\n";
    }
}
print OUT "  ";
for ($i = $nbus-$h+1; $i <= $nbus-1; $i++) {
    print OUT "'$busname[$i]'; ";
}
print OUT "'$busname[$nbus]'};\n\n";

# -----------------------------------------------------------------------
# close output data file
# -----------------------------------------------------------------------
close(OUT) || die "cannot close $ARGV[1]: $!\n";
print "Conversion completed.\n";

# -----------------------------------------------------------------------
# function for formatting data and/or assigning default values
# -----------------------------------------------------------------------
sub assign {
    my $param;
    $param = substr($_[0],$_[1],$_[2]);
    $param =~ s/\s*//g;
    unless ($param) {$param = "0";}
    #$param =~ s/^0*\.0*//;
    unless ($param =~ /[1-9]/) {$param = $_[3];}
    return $param;
}

# -----------------------------------------------------------------------
# function for formatting data and/or assigning default values
# -----------------------------------------------------------------------
sub deblank {
    my $name = $_[0];
    $name =~ s/( *)$//;
    return $name;
}

# -----------------------------------------------------------------------
# function for writing a separator
# -----------------------------------------------------------------------
sub carret {
    $verbose && print "-" x 50 . "\n";
}