ge2psat

这是一个很适合研究和学习用的电力系统仿真软件

	    $pvvs[$npv] = $einsch{$idxsvc[$nsvc]};
	    $pvpt[$npv] = 0;
	    $pvpb[$npv] = 0;
	    
	}
    }
}

# read area data
while (<IN>) {
    chomp;
    if (/^zone/) { last; }
    @data = mysplit($_);
    # add area only if a slack bus is defined
    if ($data[2] > 0) {
	$narea++;
	$areanum[$narea] = $data[0];
	$areaslack[$narea] = $data[2];
	$areaexp[$narea] = $data[3]/$pbas;
	$areatol[$narea] = $data[4]/$pbas;
    }
}

# read zone data
while (<IN>) {
    chomp;
    if (/^interface data/) { last; }
    @data = mysplit($_);
}

# read interface data
while (<IN>) {
    chomp;
    if (/^interface branch/) { last; }
    @data = mysplit($_);
}

# read interfase branch data
while (<IN>) {
    chomp;
    if (/^dc bus/) { last; }
    @data = mysplit($_);
}

# read dc bus data
while (<IN>) {
    chomp;
    if (/^dc converter/) { last; }
    @data = mysplit($_);
}

# read dc converter data
while (<IN>) {
    chomp;
    if (/^z/) { last; }
    @data = mysplit($_);
}

# read z table data
while (<IN>) {
    chomp;
    if (/^gcd/) { last; }
    @data = mysplit($_);
}

# read gcd data
while (<IN>) {
    chomp;
    if (/^transaction/) { last; }
    @data = mysplit($_);
}

# read transaction data
while (<IN>) {
    chomp;
    if (/^owner/) { last; }
    @data = mysplit($_);
}

# read owner data
while (<IN>) {
    chomp;
    if (/^motor/) { last; }
    @data = mysplit($_);
}

# read motor data
while (<IN>) {
    chomp;
    if (/^line/) { last; }
    @data = mysplit($_);
}

# read line data
while (<IN>) {
    chomp;
    if (/^end/) { last; }
    @data = mysplit($_);
}

# -----------------------------------------------------------------------
# close data file
# -----------------------------------------------------------------------
close(IN) || die "cannot close $ARGV[0]: $!\n";

# -----------------------------------------------------------------------
# open output data file
# -----------------------------------------------------------------------
print "Writing PSAT file \"$ARGV[1]\"...\n";
carret();
open(OUT,">$ARGV[1]") || die "cannot open $ARGV[1]: $!\n";

# -----------------------------------------------------------------------
# write output data file
# -----------------------------------------------------------------------
print OUT "% File generated by PSAT from GE data file.\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% Author:   Juan Carlos Morataya\n";
print OUT "% E-mail:   jmorataya\@eegsa.net\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% 'Generic GE data format "."$ARGV[0]'"."\n";
#$ntitle >= 0 && print OUT "% "."-" x 78 . "\n";
for ($i = 0; $i <= $ntitle; $i++) { print OUT "% $title[$i]\n"; }
$ncom >= 0 && print OUT "% "."-" x 27 . "  Begin  file comments  "."-" x 27 . "\n";
for ($i = 0; $i <= $ncom; $i++) { print OUT "% $comment[$i]\n"; }
$ncom >= 0 && print OUT "% "."-" x 27 . "   End  file comments   "."-" x 27 . "\n\n";

# -----------------------------------------------------------------------
# write Bus.con
# -----------------------------------------------------------------------
$format = "%4d  %8.5f  1   0   1  %2d";
$nbus >= 0 && print OUT "Bus.con = [ ...\n";

for ($i = 0; $i <= $nbus-1; $i++) {
    printf OUT "$format;\n",$busidx[$i],$kvb[$i],
    $kzo[$i];
}

$nbus >= 0 && printf OUT "$format];\n\n",$busidx[$i],$kvb[$i],
$kzo[$i];
# -----------------------------------------------------------------------
# write SW.con
# -----------------------------------------------------------------------
if ($nsw >= 0) {
	print OUT "SW.con = [ ...\n";
    $format = "%4d %7.2f %6.2f %8.5f 0.00 %8.5f %8.5f 1.1 0.9 %8.5f 1";
    printf OUT "$format];\n\n", $swbus,$swsb,$kvbase{$swbus},
    $swvs,$swqt,$swqb,$swpg;
}

# -----------------------------------------------------------------------
# write PV.con
# -----------------------------------------------------------------------
$npv >= 0 && printf OUT "PV.con = [ ...\n";
$format = "%4d %7.2f %6.2f " . "%8.5f " x 4 . "1.1 0.9 1";
for ($i = 0; $i <= $npv-1; $i++) {
    printf OUT "$format;\n", $pvbus[$i],$pvsb[$i],$kvbase{$pvbus[$i]},
    $pvpg[$i],$pvvs[$i],$pvqt[$i],$pvqb[$i];
}
$i = $npv;
$npv >= 0 && printf OUT "$format];\n\n",$pvbus[$i],$pvsb[$i],
    $kvbase{$pvbus[$i]},$pvpg[$i],$pvvs[$i],$pvqt[$i],$pvqb[$i];

# -----------------------------------------------------------------------
# write PQ.con
# -----------------------------------------------------------------------
$npq >= 0 && printf OUT "PQ.con = [ ...\n";
$format = "%4d $pbas %8.2f %8.5f %8.5f 1.1 0.9 1";
for ($i = 0; $i <= $npq-1; $i++) {
    $h = $pqbus[$i];
    printf OUT "$format;\n", $h,$kvbase{$h},$pqpl[$i],$pqql[$i];
}
$h = $pqbus[$npq];
$i = $npq;
$npq >= 0 && printf OUT "$format];\n\n",$h,$kvbase{$h},$pqpl[$i],
    $pqql[$i];

# -----------------------------------------------------------------------
# write Pl.con
# -----------------------------------------------------------------------
$npl >= 0 && print OUT "Pl.con = [ ...\n";
$format = "%4d $pbas %8.2f 60 %8.5f %8.5f 0 %8.5f %8.5f 0 0";
for ($i = 0; $i <= $npl-1; $i++) {
    printf OUT "$format;\n", $plbus[$i],$kvbase{$plbus[$i]},$plyp[$i],
    $plip[$i],$plyq[$i],$pliq[$i];
}
$h = $plbus[$npl];
$i = $npl;
$npl >= 0 && printf OUT "$format];\n\n",$plbus[$i],$kvbase{$plbus[$i]},
    $plyp[$i],$plip[$i],$plyq[$i],$pliq[$i];

# -----------------------------------------------------------------------
# write Shunt.con
# -----------------------------------------------------------------------
$nsh >= 0 && print OUT "Shunt.con = [ ...\n";
$format = "%4d $pbas %8.2f 60 %8.5f %8.5f";
for ($i = 0; $i <= $nsh-1; $i++) {
	if ($psh[$i] != 0 or $qsh[$i] != 0) {
       $h = $idxsh[$i];
       printf OUT "$format;\n", $h,$kvbase{$h},$psh[$i],$qsh[$i];
    }
}
$h = $idxsh[$nsh];
$i = $nsh;
$nsh >= 0 && printf OUT "$format];\n\n",$h,$kvbase{$h},$psh[$i],$qsh[$i];

# -----------------------------------------------------------------------
# write Line.con
# -----------------------------------------------------------------------
if ($nline >= 0) {
    print OUT "Line.con = [ ...\n";
    $format = "%4d %4d " . " %8.5f " x 2 ."  60   0 " . " %8.5f " x 4 . 
    "" . " %8.5f " x 5 . "";
    for ($i = 0; $i <= $nline-1; $i++) {
    $k = $kvbase{$busfr[$i]}/$kvbase{$bustt[$i]};
    if ($k == 1) { $k = 0; }
    if ($k != 0) { $pbas = $pbtf[$i]; }
    printf OUT "$format;\n",$busfr[$i],$bustt[$i],$pbas,$kvbase{$busfr[$i]},
	$k,$rest[$i],$reat[$i],$susc[$i],$ratio[$i],$phas[$i],$ratea[$i],
	$rateb[$i],$ratec[$i];
    }
    $i = $nline; 
    $k = $kvbase{$busfr[$i]}/$kvbase{$bustt[$i]};
    if ($k == 1) { $k = 0; }
    if ($k != 0) { $pbas = $pbtf[$i]; }
    printf OUT "$format];\n\n",$busfr[$i],$bustt[$i],$pbas,$kvbase{$busfr[$i]},
	$k,$rest[$i],$reat[$i],$susc[$i],$ratio[$i],$phas[$i],$ratea[$i],
	$rateb[$i],$ratec[$i];
}    

# -----------------------------------------------------------------------
# write Svc.con
# -----------------------------------------------------------------------
$nsvc >= 0 && print OUT "Svc.con = [ ...\n";
$format = "%4d $pbas %8.2f 60 1 1 10 " . "%8.5f " x 3;
for ($i = 0; $i <= $nsvc-1; $i++) {
    printf OUT "$format;\n",$idxsvc[$i],$kvbase{$idxsvc[$i]},
    $einsch{$idxsvc[$i]},$svcbma[$i],$svcbmi[$i];
}
$i = $nsvc;
if ($nsvc >= 0) {
    printf OUT "$format];\n\n",$idxsvc[$i],$kvbase{$idxsvc[$i]},
    $einsch{$idxsvc[$i]},$svcbma[$i],$svcbmi[$i];
}

# -----------------------------------------------------------------------
# write Area.con
# -----------------------------------------------------------------------
$narea >= 0 && print OUT "Area.con = [ ...\n";
$format = "%4d %4d $pbas %8.5f %8.5f";
for ($i = 0; $i <= $narea-1; $i++) {
    printf OUT "$format;\n", $areanum[$i],$areaslack[$i],
    $areaexp[$i],$areatol[$i];
}
$i = $narea;
if ($narea >= 0) {
    printf OUT "$format];\n\n", $areanum[$i],$areaslack[$i],
    $areaexp[$i],$areatol[$i];
}

# -----------------------------------------------------------------------
# write Varname.bus
# -----------------------------------------------------------------------
$nbus >= 0 && print OUT "Varname.bus = { ...\n";
$h = ($nbus+1) % 5;
if ($h == 0) {$h = 5;}
if (($nbus+1) > 5) {
    for ($i = 0; $i <= $nbus-$h; $i+=5) {
	print OUT "  '$busname[$i]'; '$busname[$i+1]'; " . 
	    "'$busname[$i+2]'; '$busname[$i+3]'; '$busname[$i+4]';\n";
    }
}
print OUT "  ";
for ($i = $nbus-$h+1; $i <= $nbus-1; $i++) {
    print OUT "'$busname[$i]'; ";
}
print OUT "'$busname[$nbus]'};\n\n";

# -----------------------------------------------------------------------
# close output data file
# -----------------------------------------------------------------------
close(OUT) || die "cannot close $ARGV[1]: $!\n";
print "Conversion completed.\n";

# -----------------------------------------------------------------------
# function for formatting data and/or assigning default values
# -----------------------------------------------------------------------
sub assign {
    my $param;
    $param = substr($_[0],$_[1],$_[2]);
    $param =~ s/\s*//g;
    unless ($param) {$param = "0";}
    unless ($param =~ /[1-9]/) {$param = $_[3];}
    return $param;
}
# -----------------------------------------------------------------------
# function for writing a separator
# -----------------------------------------------------------------------
sub carret {
    $verbose && print "-" x 50 . "\n";
}

# -----------------------------------------------------------------------
# function for reading comma separated data
# -----------------------------------------------------------------------
sub mysplit0 {
    if ($_ =~  /\s+/)  {
	my $string = $_[0];
	$string =~ s/://g;
	$string =~ s/\s+\"//g;  
	$string =~ s/\"//g; 
	my @mydata = split /\s+/, $string; 
	if ($mydata[0] eq "") { shift(@mydata); } 
	return @mydata; 
    }  
}

# -----------------------------------------------------------------------
# function for reading comma separated data
# -----------------------------------------------------------------------
sub mysplit {
    my $nn = 0;
    my @localdata;
    $_[0] =~ s/://g;
    $_[0] =~ s/\///g;

    $nn = 0;
    while ($_[0]) {
	$_[0] =~ s/\s*-?\d+[\.,]?\d*\s*|\s*\".*?\"\s*//;
	$localdata[$nn] = $&;
	$localdata[$nn] =~ s/^\s*\"?//;
	$localdata[$nn] =~ s/,/\./;
	$localdata[$nn] =~ s/\s*\"?\s*$//;
	$nn++;
	if ($nn > 100) {die "Bad input string (infinite regexp loop...)";}
    }
    return @localdata;
}

# -----------------------------------------------------------------------
# function for finding multiple PQ loads at the same bus
# -----------------------------------------------------------------------
sub pqidx {
    my $mypqbus = $_[0];
    my $check = -1;

    for ($i = 0; $i <= $npq; $i++) {
	if ($pqbus[$i] == $mypqbus) {
	    $check = $i; 
	    last;
	}	    
    }	
    return $check;
}

# -----------------------------------------------------------------------
# function for finding multiple PV generators at the same bus
# -----------------------------------------------------------------------
sub pvidx {
    my $mypvbus = $_[0];
    my $check = -1;

    for ($i = 0; $i <= $npv; $i++) {
	if ($pvbus[$i] == $mypvbus) {
	    $check = $i; 
	    last;
	}	    
    }	
    return $check;
}