pwrworld2psat

这是一个很适合研究和学习用的电力系统仿真软件

	    $rest[$nline] = $data[$index{"LineR"}];
	    $reat[$nline] = $data[$index{"LineX"}];
	    $susc[$nline] = $data[$index{"LineC"}];
	    $tap[$nline] = $data[$index{"LineTap"}];
	    $phi[$nline] = 0.01745329251994*$data[$index{"LinePhase"}];
	    $iijmax[$nline] = $data[$index{"LineAMVA"}]/100;
	    if ($index{"LineBMVA"}) {
		$pijmax[$nline] = $data[$index{"LineBMVA"}]/100;
	    } else {
		$pijmax[$nline] = 0;
	    }
	    if ($index{"LineCMVA"}) {
		$sijmax[$nline] = $data[$index{"LineCMVA"}]/100;
	    } else {
		$sijmax[$nline] = 0;
	    }
	    if (1*$data[$index{"LineShuntMW"}] || 
		1*$data[$index{"LineShuntMVR"}]) {
		$nsh++;	
		$shidx[$nsh] = $data[$index{"BusNum"}];
		$kvsh[$nsh] = $vn[$busnumb{$data[$index{"BusNum"}]}];
		$gsh[$nsh] = $data[$index{"LineShuntMW"}]/100;
		$bsh[$nsh] = $data[$index{"LineShuntMVR"}]/100;
	    } 
	    if (1*$data[$index{"LineShuntMW:1"}] ||
		1*$data[$index{"LineShuntMVR:1"}]) {
		$nsh++;
		$shidx[$nsh] = $data[$index{"BusNum:1"}];
		$kvsh[$nsh] = $vn[$busnumb{$data[$index{"BusNum:1"}]}];
		$gsh[$nsh] = $data[$index{"LineShuntMW:1"}]/100;
		$bsh[$nsh] = $data[$index{"LineShuntMVR:1"}]/100;
	    }     
	}
    }	
}

# -----------------------------------------------------------------------
# close AUX data file
# -----------------------------------------------------------------------
close(IN) || die "cannot close $ARGV[0]: $!\n";

# -----------------------------------------------------------------------
# open output data file
# -----------------------------------------------------------------------
print "Writing PSAT file \"$ARGV[1]\"...\n";
carret();
open(OUT,">$ARGV[1]") || die "cannot open $ARGV[1]: $!\n";

# -----------------------------------------------------------------------
# write output data file
# -----------------------------------------------------------------------
print OUT "% File generated by PSAT from POWERWORLD data file.\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% Author:   Federico Milano\n";
print OUT "% E-mail:   fmilano\@thunderbox.uwaterloo.ca\n";
print OUT "% Web-site: http://thunderbox.uwaterloo.ca/~fmilano\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% $title1\n";
print OUT "% $title2\n\n";

# -----------------------------------------------------------------------
# write Bus.con
# -----------------------------------------------------------------------
$format = "%4d %8.2f %8.5f %8.5f %4d %4d";
$nbus >= 0 && print OUT "Bus.con = [ ...\n";
for ($i = 0; $i <= $nbus-1; $i++) {
    printf OUT "$format;\n",$busidx[$i],$vn[$i],$ein[$i],$ang[$i],
    $area[$i],$zone[$i];
}
$i = $nbus;
$nbus >= 0 && printf OUT "$format];\n\n",$busidx[$i],$vn[$i],$ein[$i],
    $ang[$i],$area[$i],$zone[$i];

# -----------------------------------------------------------------------
# write SW.con
# -----------------------------------------------------------------------
$nsw >= 0 && print OUT "SW.con = [ ...\n";
$format = "%4d $pbas %8.2f %8.5f 0 %8.5f %8.5f 1.2 0.8 %8.5f 1";
$nsw >= 0 && printf OUT "$format];\n\n",$slack,$vn[$busnumb{$slack}],
    $swvolt,$swqmax,$swqmin,$swpgen;

# -----------------------------------------------------------------------
# write PV.con
# -----------------------------------------------------------------------
$npv >= 0 && print OUT "PV.con = [ ...\n";
$format = "%4d %8.2f %8.2f " . "%8.5f " x 4 . "1.2 0.8 1";
for ($i = 0; $i <= $npv-1; $i++) {
    $h = $busnumb{$pvidx[$i]};
    printf OUT "$format;\n", $pvidx[$i],$pvbase[$i],$vn[$h],
    $pgen[$i],$volt[$i],$qmax[$i],$qmin[$i];
}
$h = $npv;
$npv >= 0 && printf OUT "$format];\n\n",$pvidx[$h],$pvbase[$h],
    $vn[$busnumb{$pvidx[$h]}],$pgen[$h],$volt[$h],$qmax[$h],$qmin[$h];

# -----------------------------------------------------------------------
# write Supply.con
# -----------------------------------------------------------------------
$nsupply >= 0 && print OUT "Supply.con = [ ...\n";
$format = "%4d %8.2f 0 %8.5f %8.5f 0 %8.5f %8.5f %8.5f 0 0 0 0 0";
for ($i = 0; $i <= $nsupply-1; $i++) {
    printf OUT "$format;\n", $supply[$i],$subase[$i],
    $pmax[$i],$pmin[$i],$c0[$i],$c1[$i],$c2[$i];
}
$i = $nsupply;
$nsupply >= 0 && printf OUT "$format];\n\n",$supply[$i],$subase[$i],
    $pmax[$i],$pmin[$i],$c0[$i],$c1[$i],$c2[$i];

# -----------------------------------------------------------------------
# write PQ.con
# -----------------------------------------------------------------------
$npq >= 0 && print OUT "PQ.con = [ ...\n";
$format = "%4d $pbas %8.2f %8.5f %8.5f 1.2 0.8 0";
for ($i = 0; $i <= $npq-1; $i++) {
    $h = $busnumb{$pqidx[$i]};
    printf OUT "$format;\n", $pqidx[$i],$vn[$h],$sa0[$i],$sr0[$i];
}
$npq >= 0 && printf OUT "$format];\n\n",$pqidx[$npq],
    $vn[$busnumb{$pqidx[$npq]}],$sa0[$npq],$sr0[$npq];

# -----------------------------------------------------------------------
# write Pl.con
# -----------------------------------------------------------------------
$npl >= 0 && print OUT "Pl.con = [ ...\n";
$format = "%4d $pbas %8.2f 60 %8.5f %8.5f 0 %8.5f %8.5f 0 0";
for ($i = 0; $i <= $npl-1; $i++) {
    $h = $busnumb{$plidx[$i]};
    printf OUT "$format;\n", $plidx[$i],$vn[$h],
    $za0[$i],$ia0[$i],$zr0[$i],$ir0[$i];
}
$npl >= 0 && printf OUT "$format];\n\n",$plidx[$npl],
    $vn[$busnumb{$plidx[$npl]}],$za0[$npl],$ia0[$npl],
    $zr0[$npl],$ir0[$npl];

# -----------------------------------------------------------------------
# write Shunt.con
# -----------------------------------------------------------------------
$nsh >= 0 && print OUT "Shunt.con = [ ...\n";
$format = "%4d $pbas %8.2f 60 %8.5f %8.5f";
for ($i = 0; $i <= $nsh-1; $i++) {
    printf OUT "$format;\n", $shidx[$i],$kvsh[$i],$gsh[$i],$bsh[$i];
}
$h = $nsh;
$nsh >= 0 && printf OUT "$format];\n\n",$shidx[$h],$kvsh[$h],$gsh[$h],$bsh[$h];

# -----------------------------------------------------------------------
# write Line.con
# -----------------------------------------------------------------------
$nline >= 0 && print OUT "Line.con = [ ...\n";
$format = "%4d %4d $pbas %8.2f 60 0 %7.4f " . "%8.5f " x 5 . "%8.3f %8.3f %8.3f";
for ($i = 0; $i <= $nline-1; $i++) {
    printf OUT "$format;\n", $busfr[$i],$busto[$i],
    $kvbase[$i],$kt[$i],$rest[$i],$reat[$i],$susc[$i],$tap[$i],
    $phi[$i],$iijmax[$i],$pijmax[$i],$sijmax[$i];
}
$i = $nline;
if ($nline >= 0) {
    printf OUT "$format];\n\n",$busfr[$i],$busto[$i],
    $kvbase[$i],$kt[$i],$rest[$i],$reat[$i],$susc[$i],$tap[$i],
    $phi[$i],$iijmax[$i],$pijmax[$i],$sijmax[$i];
}

# -----------------------------------------------------------------------
# write Varname.bus
# -----------------------------------------------------------------------
$nbus >= 0 && print OUT "Varname.bus = { ...\n";
$h = ($nbus+1) % 5;
if ($h == 0) {$h = 5;}
if (($nbus+1) > 5) {
    for ($i = 0; $i <= $nbus-$h; $i+=5) {
	print OUT "  '$busname{$i}'; '$busname{$i+1}'; " . 
	    "'$busname{$i+2}'; '$busname{$i+3}'; '$busname{$i+4}';\n";
    }
}
print OUT "  ";
for ($i = $nbus-$h+1; $i <= $nbus-1; $i++) {
    print OUT "'$busname{$i}'; ";
}
print OUT "'$busname{$nbus}'};\n\n";

# -----------------------------------------------------------------------
# close output data file
# -----------------------------------------------------------------------
close(OUT) || die "cannot close $ARGV[1]: $!\n";
print "Conversion completed.\n";



# -----------------------------------------------------------------------
# function for formatting data and/or assigning default values
# -----------------------------------------------------------------------
sub assign {
    my $param;
    $param = substr($_[0],$_[1],$_[2]);
    $param =~ s/\s*//g;
    unless ($param) {$param = "0";}
    #$param =~ s/^0*\.0*//;
    unless ($param =~ /[1-9]/) {$param = $_[3];}
    return $param;
}

# -----------------------------------------------------------------------
# function for formatting data and/or assigning default values
# -----------------------------------------------------------------------
sub deblank {
    my $name = $_[0];
    $name =~ s/( *)$//;
    return $name;
}

# -----------------------------------------------------------------------
# function for writing a separator
# -----------------------------------------------------------------------
sub carret {
    $verbose && print "-" x 50 . "\n";
}

# -----------------------------------------------------------------------
# function for scanning the file up to the data entries
# -----------------------------------------------------------------------
sub scanfile {

    my $tag = "DATA \\(" . $_[0] . ", \\[";
    my @names;
    my $numidx = -1;
    my %index;

    $_ =~ s/$tag//;
    $_ =~ s/\]\)//;
    $_ =~ s/\s*//g;
    @names = split(",");
    foreach (@names) {
	$numidx++;
	$index{$_} = $numidx;
    }
    while (<IN>) {		
	if (m/^\{/) {last;}
	$_ =~ s/$tag//;
	$_ =~ s/\]\)//;
	$_ =~ s/\s*//g;
	@names = split(",");
	foreach (@names) {
	    $numidx++;
	    $index{$_} = $numidx;
	}
    }
    return %index;
}

# -----------------------------------------------------------------------
# function splitting data
# -----------------------------------------------------------------------
sub splitdata {
    my $nn = 0;
    my @localdata;

    $nn = 0;
    while ($_[0]) {
	$_[0] =~ s/\s*-?\d+[\.,]?\d*\s*|\s*\".*?\"\s*//;
	$localdata[$nn] = $&;
	$localdata[$nn] =~ s/^\s*\"?//;
	$localdata[$nn] =~ s/,/\./;
	$localdata[$nn] =~ s/\s*\"?\s*$//;
	$nn++;
	if ($nn > 100) {die "Bad input string (infinite regexp loop...)";}
    }
    return @localdata;
}