th2psat

这是一个很适合研究和学习用的电力系统仿真软件

    } elsif (/^GENER/) { # PQ generator
	$idx = addbus($dum[2]);
	#if ($dum[3] || $dum[4]) {
	#    $npq++;
	#    $idxpq[$npq] = $idx;
	#    $pac[$idx] = -$dum[3]/$pbas;
	#    $prc[$idx] = -$dum[4]/$pbas;
	#}
	$genname{$dum[1]} = $idx;
    } elsif (/^THLOAD/) { # PQ load
	$idx = addbus($dum[2]);
	$npq++;
	$idxpq[$npq] = $idx;
	$pac[$idx] = $dum[3];
	$prc[$idx] = $dum[4];
    } elsif (/^LOAD/) { # ZIP load
	$idx = addbus($dum[2]);
	$nzip++;
	$idxzip[$nzip] = $idx;
	$ppzip[$nzip] = $dum[3]/$pbas;
	$pqzip[$nzip] = $dum[4]/$pbas;
	$ipzip[$nzip] = $dum[5]/$pbas/$dum[9];
	$iqzip[$nzip] = $dum[6]/$pbas/$dum[9];
	$zpzip[$nzip] = $dum[7]/$pbas/$dum[9]/$dum[9];
	$zqzip[$nzip] = $dum[8]/$pbas/$dum[9]/$dum[9]; 
	$kvzip[$nzip] = $dum[9];
    } elsif (/^THSHUNT/) { # Shunt
	$idx = addbus($dum[2]);
	$nsh++;
	$idxsh[$nsh] = $idx;
	$psh[$idx] = $dum[3];
	$qsh[$idx] = -$dum[4];
    } elsif (/^THSLACK/) { # Slack bus
	$nsw++;
	$idxsw[$nsw] = $dum[1];
	$vsw[$nsw] = $dum[2];
	$tsw[$nsw] = 3.141592654*$dum[3]/180;
    } elsif (/^SLACK/) { # Slack bus
	$idx = addbus($dum[2]);
	$nsw++;
	$genname{$dum[1]} = $idx;
	$idxsw[$nsw] = $dum[1];
	$vsw[$nsw] = $dum[3];
	$tsw[$nsw] = 3.141592654*$dum[4]/180;
    } elsif (/^RES_V/) { # solution voltages
	$idx = addbus($dum[1]);
	$ein[$idx] = $dum[2];
	$ang[$idx] = 3.141592654*$dum[3]/180;
    } elsif (/^RES_MAC/) { # generators output
	# not used
    } elsif (/^MAC_CMXD/) { # generator data
	# not used
    } else {
	$verbose && print "Warning: Line $n does not seem " .
	    "properly formed and will be ignored.\n";
    }
}

# -----------------------------------------------------------------------
# close input data file
# -----------------------------------------------------------------------
close(IN) || die "cannot close $ARGV[0]: $!\n";

# -----------------------------------------------------------------------
# open output data file
# -----------------------------------------------------------------------
print "Writing PSAT file \"$ARGV[1]\"...\n";
carret();
open(OUT,">$ARGV[1]") || die "cannot open $ARGV[1]: $!\n";

# -----------------------------------------------------------------------
# write output data file
# -----------------------------------------------------------------------
print OUT "% File generated by PSAT from TH data file.\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% Author:   Federico Milano\n";
print OUT "% E-mail:   fmilano\@thunderbox.uwaterloo.ca\n";
print OUT "% Web-site: http://thunderbox.uwaterloo.ca/~fmilano\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% $title1\n";
print OUT "% $title2\n\n";

# -----------------------------------------------------------------------
# write Bus.con
# -----------------------------------------------------------------------
$format = "%4d 1 %8.5f %8.5f 1 1";
$nbus >= 0 && print OUT "Bus.con = [ ...\n";
for ($i = 1; $i <= $nbus-1; $i++) {
    printf OUT "$format;\n",$i,$ein[$i] || 1,$ang[$i] || 0;
}
$i = $nbus;
$nbus >= 0 && printf OUT "$format];\n\n",$i,$ein[$i] || 1,$ang[$i] || 0;

# -----------------------------------------------------------------------
# write SW.con
# -----------------------------------------------------------------------
$nsw >= 0 && print OUT "SW.con = [ ...\n";
$format = "%4d $pbas 1 " . "%8.5f " x 4 . "1.1 0.9 %8.5f 1";
for ($i = 0; $i <= $nsw-1; $i++) {
    $h = $genname{$idxsw[$i]};
    printf OUT "$format;\n", $h,$vsw[$i] || $ein[$h] || 1,
    $tsw[$h] || $ang[$h] || 0,$qma[$h] || 9999,
    $qmi[$h] || -9999,$pag[$h] || 0;
}
$h = $genname{$idxsw[$nsw]};
$nsw >= 0 && printf OUT "$format];\n\n",$h,$vsw[-1] || $ein[$h] || 1,
    $tsw[-1] || $ang[$h] || 0,$qma[$h] || 9999,$qmi[$h] || -9999,
    $pag[$h] || 0;

# -----------------------------------------------------------------------
# write PV.con
# -----------------------------------------------------------------------
$npv >= 0 && print OUT "PV.con = [ ...\n";
$format = "%4d $pbas 1 " . "%8.5f " x 4 . "1.1 0.9 1";
for ($i = 0; $i <= $npv-1; $i++) {
    $h = $idxpv[$i];
    printf OUT "$format;\n", $h,$pag[$h] || 0,$ein[$h] || 1,
    $qma[$h] || 9999,$qmi[$h] || -9999;
}
$h = $idxpv[$npv];
$npv >= 0 && printf OUT "$format];\n\n",$h,$pag[$h] || 0,
    $ein[$h] || 1,$qma[$h] || 9999,$qmi[$h] || -9999;

# -----------------------------------------------------------------------
# write PQ.con
# -----------------------------------------------------------------------
$npq >= 0 && print OUT "PQ.con = [ ...\n";
$format = "%4d $pbas 1 %8.5f %8.5f 1.1 0.9 1";
for ($i = 0; $i <= $npq-1; $i++) {
    $h = $idxpq[$i];
    printf OUT "$format;\n", $h,$pac[$h],$prc[$h];
}
$h = $idxpq[$npq];
$npq >= 0 && printf OUT "$format];\n\n",$h,$pac[$h],$prc[$h];

# -----------------------------------------------------------------------
# write Shunt.con
# -----------------------------------------------------------------------
$idx = $nsh + $nshunt + 1;
if ($idx >= 0) {
    print OUT "Shunt.con = [ ...\n";
    $format = "%4d $pbas 1 $freq %8.5f %8.5f";
    for ($i = 0; $i <= $nsh-1; $i++) {
	$h = $idxsh[$i];
	printf OUT "$format;\n", $h,$psh[$h],$qsh[$h];	
    }
    $h = $idxsh[$nsh];
    if ($nshunt == -1) {
	$nsh >= 0 && printf OUT "$format];\n\n",$h,$psh[$h],$qsh[$h];
    } else {
	$nsh >= 0 && printf OUT "$format;\n",$h,$psh[$h],$qsh[$h];	
    }
    for ($i = 0; $i <= $nshunt-1; $i++) {
	$h = $busname{$shname[$i]};
	printf OUT "$format;\n", $h,$gsh[$i],$bsh[$i];	
    }
    if ($nshunt >= 0) {
	$h = $busname{$shname[$nshunt]};
	printf OUT "$format;\n",$h,$gsh[$nshunt],$bsh[$nshunt];	    
    }
}

# -----------------------------------------------------------------------
# write Pl.con
# -----------------------------------------------------------------------
$nzip >= 0 && print OUT "Pl.con = [ ...\n";
$format = "%4d $pbas %8.2f $freq "."%8.5f " x 6 . "0";
for ($i = 0; $i <= $nzip-1; $i++) {
    $h = $idxzip[$i];
    printf OUT "$format;\n", $h,$kvzip[$h],$ppzip[$h],$pqzip[$h],
    $ipzip[$h],$iqzip[$h],$zpzip[$h],$zqzip[$h];
}
$h = $idxzip[$nzip];
$nzip >= 0 && printf OUT "$format];\n\n", $h,$kvzip[$h],$ppzip[$h],
    $pqzip[$h],$ipzip[$h],$iqzip[$h],$zpzip[$h],$zqzip[$h];

# -----------------------------------------------------------------------
# write Line.con
# -----------------------------------------------------------------------
$nline >= 0 && print OUT "Line.con = [ ...\n";
$format = "%4d %4d $pbas 1 $freq 0 %5.2f "."%8.5f " x 5 . "0 0 %8.3f";
for ($i = 0; $i <= $nline-1; $i++) {
    printf OUT "$format;\n", $busidx{$busfr[$i]},
    $busidx{$busto[$i]},$kt[$i] || 0,$rest[$i],$reat[$i],
    $susc[$i] || 0,$tfas[$i] || 1,$phsf[$i] || 0,$sbas[$i] || 0;
}
$i = $nline;
if ($nline >= 0) {
    printf OUT "$format];\n\n", $busidx{$busfr[$i]},
    $busidx{$busto[$i]},$kt[$i] || 0,$rest[$i],$reat[$i],
    $susc[$i] || 0,$tfas[$i] || 1,$phsf[$i] || 0,$sbas[$i] || 0;
}

# -----------------------------------------------------------------------
# write Ltc.con
# -----------------------------------------------------------------------
$nltc >= 0 && print OUT "Ltc.con = [ ...\n";
$format = "%4d %4d $pbas 1 $freq %8.5f 0 0.1 "."%8.5f " x 3 .
    "1 %8.5f %8.5f 0 1";
for ($i = 0; $i <= $nltc-1; $i++) {
    printf OUT "$format;\n", $busidx{$ltcfr[$i]},$busidx{$ltcto[$i]},
    $mltc[$i],$mmax[$i],$mmin[$i],$mstep[$i],$xltc[$i],$rltc[$i];
}
$i = $nltc;
if ($nltc >= 0) {
    printf OUT "$format];\n\n", $busidx{$ltcfr[$i]},
    $busidx{$ltcto[$i]},$mltc[$i],$mmax[$i],$mmin[$i],$mstep[$i],
    $xltc[$i],$rltc[$i];
}

# -----------------------------------------------------------------------
# write Varname.bus
# -----------------------------------------------------------------------
$nbus > 0 && print OUT "Varname.bus = { ...\n";
$h = $nbus % 5;
if ($h == 0) {$h = 5;}
if ($nbus > 5) {
    for ($i = 1; $i <= $nbus-$h; $i+=5) {
	print OUT "  '$busname{$i}'; '$busname{$i+1}'; " . 
	    "'$busname{$i+2}'; '$busname{$i+3}'; '$busname{$i+4}';\n";
    }
}
print OUT "  ";
for ($i = $nbus-$h+1; $i <= $nbus-1; $i++) {
    print OUT "'$busname{$i}'; ";
}
print OUT "'$busname{$nbus}'};\n\n";

# -----------------------------------------------------------------------
# close output data file
# -----------------------------------------------------------------------
close(OUT) || die "cannot close $ARGV[1]: $!\n";
print "Conversion completed.\n";

# -----------------------------------------------------------------------
# function for writing a separator
# -----------------------------------------------------------------------
sub carret {
    $verbose && print "-" x 50 . "\n";
}

# -----------------------------------------------------------------------
# function add new bus
# -----------------------------------------------------------------------
sub addbus {
    if ($busidx{$_[0]}) {
	return $busidx{$_[0]}; 
    } else {
	$nbus++;
	$busidx{$_[0]} = $nbus;
	$busname{$nbus} = $_[0];
	return $nbus;
    }
}