pcflo2psat

这是一个很适合研究和学习用的电力系统仿真软件

	    $data[8] == 9) {
	    $ratio[$nline] = $data[10];
	    $phas[$nline] = $data[11];
	} else {
	    $ratio[$nline] = 0;
	    $phas[$nline] = 0; 
	}	
	
    } else { # fixed position format
	$_ = $_ . $blanks;
	$nline++;
	$busfr[$nline] = assign($_,0,4,1);
	$bustt[$nline] = assign($_,4,4,1);
	$rest[$nline] = 0.01*assign($_,10,12,0);
	$reat[$nline] = 0.01*assign($_,22,12,0);
	$susc[$nline] = 0.01*assign($_,34,12,0);
	$rate[$nline] = 0.01*assign($_,46,8,100);
	$tap[$nline] = assign($_,61,7,1);
	if ($tap[$nline]) {
	    $ratio[$nline] = assign($_,75,7,0);
	    $phas[$nline] = assign($_,82,8,0);
	} 
    }
}

# -----------------------------------------------------------------------
# close LDAT.* data file
# -----------------------------------------------------------------------
close(IN) || die "cannot close $ARGV[0]: $!\n";

# -----------------------------------------------------------------------
# open ADAT.* data file
# -----------------------------------------------------------------------
$ARGV[0] =~ s/^LDAT/ADAT/;
$ARGV[0] =~ s/^ldat/adat/;
if (open(IN,$ARGV[0])) {
    print "Opening ADAT/PCFLO file \"$ARGV[0]\"...\n";

# -----------------------------------------------------------------------
# scan ADAT data file
# -----------------------------------------------------------------------
    
# read area data (all values in percent)
    while (<IN>) {
	next if /^:/;  # skip comment line
	next if !/\d/; # skip blank line
	chomp;
	@data = splitdata($_);
	if ($data[2] > 0) {
	    $narea++;
	    $areanum[$narea] = $data[0];
	    $areaslack[$narea] = $data[2];
	    $areaexp[$narea] = 0.01*$data[3];
	    $areatol[$narea] = 0.01*$data[4];
	}
    }
    
# -----------------------------------------------------------------------
# close ADAT.* data file
# -----------------------------------------------------------------------
    close(IN) || die "cannot close $ARGV[0]: $!\n";
}


# -----------------------------------------------------------------------
# open output data file
# -----------------------------------------------------------------------
print "Writing PSAT file \"$ARGV[1]\"...\n";
carret();
open(OUT,">$ARGV[1]") || die "cannot open $ARGV[1]: $!\n";

# -----------------------------------------------------------------------
# write output data file
# -----------------------------------------------------------------------
print OUT "% File generated by PSAT from PCFLO data file.\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% Author:   Juan Carlos Morataya\n";
print OUT "% E-mail:   jmorataya\@eegsa.net\n";
print OUT "% "."-" x 78 . "\n";
print OUT "% $title1\n\n";

# -----------------------------------------------------------------------
# write Bus.con
# -----------------------------------------------------------------------
$format = "%4d %8.2f %8.5f %8.5f 1 1";
$nbus >= 0 && print OUT "Bus.con = [ ...\n";

for ($i = 0; $i <= $nbus-1; $i++) {
    printf OUT "$format;\n",$busidx[$i],$kvb[$i],
    $ein[$i],$ang[$i];
}

$nbus >= 0 && printf OUT "$format];\n\n",$busidx[$i],$kvb[$i],
$ein[$i],$ang[$i];

# -----------------------------------------------------------------------
# write SW.con
# -----------------------------------------------------------------------
if ($nsw >= 0) {
    print OUT "SW.con = [ ...\n";
    $format = "%4d %7.2f %6.2f %8.5f 0.00 %8.5f %8.5f 1.1 0.9 %8.5f 1";
    printf OUT "$format];\n\n", $swbus,$pbas,$kvbase[$swbus],
    $swvs,$swqt,$swqb,$swpg;
}

# -----------------------------------------------------------------------
# write PV.con
# -----------------------------------------------------------------------
$npv >= 0 && printf OUT "PV.con = [ ...\n";
$format = "%4d %7.2f %6.2f " . "%8.5f " x 4 . "1.1 0.9 1";
for ($i = 0; $i <= $npv-1; $i++) {
    printf OUT "$format;\n", $pvbus[$i],$pbas,$kvbase[$pvbus[$i]],
    $pvpg[$i],$pvvs[$i],$pvqt[$i],$pvqb[$i];
}
$i = $npv;
$npv >= 0 && printf OUT "$format];\n\n",$pvbus[$i],$pbas,
    $kvbase[$pvbus[$i]],$pvpg[$i],$pvvs[$i],$pvqt[$i],$pvqb[$i];

# -----------------------------------------------------------------------
# write PQ.con
# -----------------------------------------------------------------------
$npq >= 0 && printf OUT "PQ.con = [ ...\n";
$format = "%4d $pbas %8.2f %8.5f %8.5f 1.1 0.9 1";
for ($i = 0; $i <= $npq-1; $i++) {
    $h = $pqbus[$i];
    printf OUT "$format;\n", $h,$kvbase[$h],$pqpl[$i],$pqql[$i];
}
$h = $pqbus[$npq];
$i = $npq;
$npq >= 0 && printf OUT "$format];\n\n",$h,$kvbase[$h],$pqpl[$i],
    $pqql[$i];

# -----------------------------------------------------------------------
# write Pl.con
# -----------------------------------------------------------------------
$npl >= 0 && print OUT "Pl.con = [ ...\n";
$format = "%4d $pbas %8.2f 60 0 0 %8.5f 0 0 %8.5f 0";
for ($i = 0; $i <= $npl-1; $i++) {
    printf OUT "$format;\n", $plbus[$i],$kvbase[$plbus[$i]],
    $pn[$i],$qn[$i];
}
$h = $plbus[$npl];
$i = $npl;
$npl >= 0 && printf OUT "$format];\n\n", $plbus[$i],$kvbase[$plbus[$i]],
    $pn[$i],$qn[$i];
        
# -----------------------------------------------------------------------
# write Shunt.con
# -----------------------------------------------------------------------
$nsh >= 0 && print OUT "Shunt.con = [ ...\n";
$format = "%4d $pbas %8.2f 60 %8.5f %8.5f";
for ($i = 0; $i <= $nsh-1; $i++) {
    if ($psh[$i] != 0 or $qsh[$i] != 0) {
	$h = $idxsh[$i];
	printf OUT "$format;\n", $h,$kvbase[$h],$psh[$i],$qsh[$i];
    }
}
$h = $idxsh[$nsh];
$i = $nsh;
$nsh >= 0 && printf OUT "$format];\n\n",$h,$kvbase[$h],$psh[$i],$qsh[$i];

# -----------------------------------------------------------------------
# write Line.con
# -----------------------------------------------------------------------
if ($nline >= 0) {
    print OUT "Line.con = [ ...\n";
    $format = "%4d %4d " . " %8.5f " x 2 ."  60   0 " . " %8.5f " x 4 . 
    "" . " %8.5f " x 3 . " 0  0";
    for ($i = 0; $i <= $nline-1; $i++) {
	$kvbase[$bustt[$i]] = 1;   
    $k = $kvbase[$busfr[$i]]/$kvbase[$bustt[$i]];
    if ($k == 1) { $k = 0; }
    printf OUT "$format;\n",$busfr[$i],$bustt[$i],$pbas,$kvbase[$busfr[$i]],
	$k,$rest[$i],$reat[$i],$susc[$i],$ratio[$i],$phas[$i],$rate[$i];
    }
    $i = $nline; 
  	$kvbase[$bustt[$i]] = 1;   
    $k = $kvbase[$busfr[$i]]/$kvbase[$bustt[$i]];
    if ($k == 1) { $k = 0; }
    printf OUT "$format];\n\n",$busfr[$i],$bustt[$i],$pbas,$kvbase[$busfr[$i]],
	$k,$rest[$i],$reat[$i],$susc[$i],$ratio[$i],$phas[$i],$rate[$i];
}    

# -----------------------------------------------------------------------
# write Area.con
# -----------------------------------------------------------------------
$narea >= 0 && print OUT "Area.con = [ ...\n";
$format = "%4d %4d $pbas %8.5f %8.5f";
for ($i = 0; $i <= $narea-1; $i++) {
    printf OUT "$format;\n", $areanum[$i],$areaslack[$i],
    $areaexp[$i],$areatol[$i];
}
$i = $narea;
if ($narea >= 0) {
    printf OUT "$format];\n\n", $areanum[$i],$areaslack[$i],
    $areaexp[$i],$areatol[$i];
}

# -----------------------------------------------------------------------
# write Varname.bus
# -----------------------------------------------------------------------
$nbus >= 0 && print OUT "Varname.bus = { ...\n";
$h = ($nbus+1) % 5;
if ($h == 0) {$h = 5;}
if (($nbus+1) > 5) {
    for ($i = 0; $i <= $nbus-$h; $i+=5) {
	print OUT "  '$busname[$i]'; '$busname[$i+1]'; " . 
	    "'$busname[$i+2]'; '$busname[$i+3]'; '$busname[$i+4]';\n";
    }
}
print OUT "  ";
for ($i = $nbus-$h+1; $i <= $nbus-1; $i++) {
    print OUT "'$busname[$i]'; ";
}
print OUT "'$busname[$nbus]'};\n\n";

# -----------------------------------------------------------------------
# close output data file
# -----------------------------------------------------------------------
close(OUT) || die "cannot close $ARGV[1]: $!\n";
print "Conversion completed.\n";

# -----------------------------------------------------------------------
# function for formatting data and/or assigning default values
# -----------------------------------------------------------------------
sub assign {
    my $param;
    $param = substr($_[0],$_[1],$_[2]);
    $param =~ s/\s*//g;
    unless ($param) {$param = "0";}
    unless ($param =~ /[1-9]/) {$param = $_[3];}
    return $param;
}
# -----------------------------------------------------------------------
# function for writing a separator
# -----------------------------------------------------------------------
sub carret {
    $verbose && print "-" x 50 . "\n";
}

# -----------------------------------------------------------------------
# function for formatting data and/or assigning default values
# -----------------------------------------------------------------------
sub deblank {
    my $name = $_[0];
    $name =~ s/( *)$//;
    return $name;
}

# -----------------------------------------------------------------------
# function for scanning the file up to the data entries 
# -----------------------------------------------------------------------
sub splitdata {
    my $kkk;
    my $name1;
    my $name2;

    # remove commas in bus names 
    $_[0] =~ m/\"\w*,\w*\"/;
    if ($& ne ",") {
	$name1 = $&;
	$name2 = $name1;
	$name2 =~ s/,/_/g;
	$_[0] =~ s/$name1/$name2/;
    }
    if ($_ =~  /,/)  {
	my @mydata = split /,/, $_[0]; 
	if (!$mydata[0]) { shift(@mydata); } 
	for ($kkk=0; $kkk<@mydata-1; $kkk++) {
	    $mydata[$kkk] =~ s/\s*//g;
	    if (!$mydata[$kkk]) { $mydata[$kkk] = 0; }
	}
	return @mydata; 
    } 
}