m8mpt._c

AVR MEGA8双机串行口通讯程序,单工485方式,用于单片机组网,有PROTEUS仿真电路,可以立刻验证

//////////主机

#include <iom8v.h>
#include <macros.h>
//ISARM pro
#define OUTLED1OFF PORTB|=0x01       //for 
#define OUTLED1ON PORTB&=~0x01
#define OUTLED2OFF PORTB|=0x02       //For 
#define OUTLED2ON PORTB&=~0x02
#define OUTLED2Pulse PORTB^=0x02

#define OUTLED3OFF PORTB|=0x04      //For 
#define OUTLED3ON PORTB&=~0x04
#define OUTLED3Pulse PORTB^=0x04
#define OUTLED4OFF PORTB|=0x08      //For 
#define OUTLED4ON PORTB&=~0x08
#define OUTLED4Pulse PORTB^=0x08

#define OUTDEON PORTD|=0x10
#define OUTDEOFF PORTD&=~0x10

#define KB0 (PINC&0x01)
#define KB1 (PINC&0x02)


///UART///
#define TXENABLE UCSRB&=~(1<<RXEN);UCSRB|=(1<<TXEN); 
#define RXENABLE UCSRB&=~(1<<TXEN);UCSRB|=(1<<RXEN); 
#define TXADDRESS UCSRB|=(1<<TXB8);TXADFG=0;
#define TXDATA UCSRB&=~(1<<TXB8);TXADFG=1;
//
#define TRFG0 0xFE
#define TRFG1 0xFD
#define TRFG2 0xF1
#define TRFG3 0xF0
//最大子板数
#define SlaveBMAX 15
//////////////////////////////
//////////////////////////////
unsigned char TXADFG=0;

unsigned char SlaveEN[17];
unsigned char SlaveCR=0;  //子板编号计数器，当作物理地址
unsigned char TXINTMAX=1;//下行发送中断次数控制值
//unsigned char TXINTCR=0;//下行发送中断次数计数器
unsigned char TXINTFG=0;//下行发送中断次数完成标志
unsigned char RXINTMAX=16;//下行发送中断次数控制值
unsigned char RXINTCR=0;//下行发送中断次数计数器
unsigned char RXINTFG=0;//下行发送中断次数完成标志

unsigned char TXBUF[30]; //发送缓冲区
unsigned char RXBUF[30];  //接收缓冲区
unsigned char TXbufP=0;  //发送缓冲区下标
unsigned char RXbufP=0;  //接收缓冲区下标
unsigned char RXbufPmax=11;//接收数据实际长度

unsigned char RXERROR=0;
/////Soft Timer
unsigned char WaitCR0=0;
unsigned char WaitCR1=0;

void SoftTimer(void)
  {
    WaitCR0++;
	if(WaitCR0>254)
	 {
	  WaitCR0=0;
	  WaitCR1++;
	 }//if(WaitCR0>0)
  }
void SoftTimerStart(void)
  {
   WaitCR0=0;
   WaitCR1=0;
  }
  
void watchdog_init(void)
     {
	   WDR();
	   WDTCR=0x0F ;
	 }
	 
void Delay_1ms(void)
	{
	unsigned int i;

	for (i = 1; i<1140; i++)
		
			;
	}

void delayXms(unsigned int n)
     {
	   unsigned int i=0;
	   while(i<n)
	     {
		  Delay_1ms();
		  i++;
		 }
	 }
	 
	 
void port_init(void)
     {
	 
					 
	  PORTB=0xFF;    //PB set to 1
	  DDRB=0xFF;     
					 
	  PORTC=0xFF;    //PC set to 1
	  DDRC=0x00;     //
	      
	  PORTD=0xFF;    //PD set to 1
	  DDRD=0x12;     //PD0:RXD PD1:TXD PD2:DI0 PD3:DI1
	                 //PD4:DI2  PD5:DI3 
	  //OUTDEON;
	  
	SFIOR&=~(1<<PUD);  //OPEN UP LINK
	//MCUCR|=(1<<ISC11); //Down edge int1
	//GICR=(1<<INT1); //enable INT1
	  
	  delayXms(10); //delay 1s
	 }
//////////////////////////UART INIT
void uart_init(void) 
   {
    
    OUTDEOFF;
    UCSRB=0x00;
	UBRRL=0x25;  //19.2kbps
	//TX EN ,9Bit ,Adress init
	UCSRB=((1<<RXCIE)|(1<<TXCIE)|(1<<UCSZ2));
	//UCSRB=((1<<TXCIE)|(1<<TXCIE)|(1<<TXEN)|(1<<TXB8));
   }//void uart_init(void) 

///////////////Timer init	 
void timer_init(void)
     {
	  ;
	 }	 	 
	

#pragma interrupt_handler timer1_ovf_isr:9
void timer1_ovf_isr(void)
{	
	 ;  
	 
}//void timer1_ovf_isr(void)

//TR to SLAVE
#pragma interrupt_handler uart1_tx_isr:14
void uart1_tx_isr(void)
 {  
    TXbufP++;
	
	  
	if(TXbufP<14)
	  {
       
	   if(TXbufP==2 )
	     {
	     OUTLED3Pulse;
	    // Delay_1ms();
	     //delayXms(1000);
		 TXDATA;
		 
		 //OUTLED3Pulse;
	     //
	     }//if(TXbufP>1)
		UDR=TXBUF[TXbufP]; 
	  }
	else
	    {
		 OUTLED1ON;
		 RXENABLE
		}//else
	OUTLED2Pulse;
	//Delay_1ms();
	//OUTLED2Pulse;
 }//void uart1_tx_isr(void)

#pragma interrupt_handler uart1_rx_isr:12
void uart1_rx_isr(void)
 {	
    RXBUF[RXbufP]=UDR;
	RXbufP++;
	if(RXBUF[11]==TRFG3)
	   OUTLED4ON;
	
 }//void uart1_rx_isr(void)
void TXbufRDY(void)
{
 TXBUF[0]=5;
 TXBUF[1]=5;
 TXBUF[2]=TRFG0;
 TXBUF[3]=TRFG1;
 TXBUF[4]=0;
 TXBUF[5]=1;
 TXBUF[12]=TRFG2;
 TXBUF[13]=TRFG3;
}//void TXbufRDY(void)



unsigned char SLSTEP=10;
void main()
{
   unsigned char i=0;
   
	//delayXms(500); 
	port_init(); //IO初始化	
	uart_init();
	//timer_init();
	
	delayXms(100); 
	RXbufP=0;
	TXbufRDY()
	SEI();
	TXbufP=0;
	TXADDRESS;
	TXENABLE;
	UDR=TXBUF[0];
	while(1)
	 {
	  
	 
	 
     }//while1
}//main