config.in

S3C2440ARM9开发板的USB驱动程序

#
# USB device configuration
#
mainmenu_option next_comment
comment 'USB support'

# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
# MPC850/MPC823 processors also have a non-PCI USB controller.
# Add Arctic II to that list.

if [ "$CONFIG_PCI" = "y" -o "$CONFIG_SA1111" = "y" \
	-o "$CONFIG_8xx" = "y" -o "$CONFIG_ARCH_OMAP1510" = "y" \
	-o "$CONFIG_ARCH_OMAP1610" = "y" \
	-o "$CONFIG_ARCTIC2" = "y" -o "$CONFIG_XSCALE_WMMX" = "y" \
	-o "$CONFIG_ARCH_S3C2440" = "y" ]; then
   tristate 'Support for USB' CONFIG_USB
else
   define_bool CONFIG_USB n
fi

if [ "$CONFIG_USB" = "y" -o  "$CONFIG_USB" = "m" ]; then
   bool '  USB verbose debug messages' CONFIG_USB_DEBUG

   comment 'Miscellaneous USB options'
   bool '  Preliminary USB device filesystem' CONFIG_USB_DEVICEFS
   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      bool '  Enforce USB bandwidth allocation (EXPERIMENTAL)' CONFIG_USB_BANDWIDTH
   else
      define_bool CONFIG_USB_BANDWIDTH n
   fi
   bool '  Long timeout for slow-responding devices (some MGE Ellipse UPSes)' CONFIG_USB_LONG_TIMEOUT

   comment 'USB Host Controller Drivers'
   source drivers/usb/hcd/Config.in
   if [ "$CONFIG_USB_UHCI_ALT" != "y" ]; then
      dep_tristate '  UHCI (Intel PIIX4, VIA, ...) support' CONFIG_USB_UHCI $CONFIG_USB
   fi
   if [ "$CONFIG_USB_UHCI" != "y" ]; then
      dep_tristate '  UHCI Alternate Driver (JE) support' CONFIG_USB_UHCI_ALT $CONFIG_USB
   else
      define_bool CONFIG_USB_UHCI_ALT n
   fi
   dep_tristate '  OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support' CONFIG_USB_OHCI $CONFIG_USB
   if [ "$CONFIG_SA1111" = "y" ]; then
      dep_tristate '    SA1111 OHCI-compatible host interface support' CONFIG_USB_OHCI_SA1111 $CONFIG_USB_OHCI
   fi
   if [ "$CONFIG_ARCH_S3C2440" = "y" ]; then
      dep_tristate '  S3C2440 OHCI-compatible host interface support' CONFIG_USB_OHCI_S3C2440 $CONFIG_USB $CONFIG_USB_OHCI
   fi
   if [ "$CONFIG_USB_OHCI_S3C2440" != "n" ]; then
      int  '    Maximum port(s) of RootHub' CONFIG_MAX_ROOT_PORTS 1
   fi

   if [ "$CONFIG_XSCALE_WMMX" = "y" ]; then
      dep_tristate '  WMMX OHCI-compatible host interface support' CONFIG_USB_OHCI_WMMX $CONFIG_USB_OHCI
   fi
   dep_tristate '    Non-PCI OHCI support' CONFIG_USB_NON_PCI_OHCI $CONFIG_USB_OHCI
   if [ "$CONFIG_8xx" = "y" ]; then
      dep_tristate '  MPC850/823 USB HCI support' CONFIG_USB_MPC8xx $CONFIG_USB
      if [ "$CONFIG_USB_MPC8xx" = "n" ]; then
         bool '  MPC850/823 USB Function (Client) support' CONFIG_USB_CLIENT_MPC8xx
      fi
   fi
   if [ "$CONFIG_IBM_OCP" = "y" ]; then
      tristate '   IBM On-chip USB support (EXPERIMENTAL)' CONFIG_USB_OCP_OHCI 
   fi
   if [ "$CONFIG_ARCH_OMAP1510" = "y" -o "$CONFIG_ARCH_OMAP1610" = "y" ]; then
      dep_tristate '    OMAP1510/1610 OHCI-compatible host interface support' CONFIG_USB_OHCI_OMAP1510 $CONFIG_USB_OHCI
   fi
   if [ "$CONFIG_ARCTIC2" = "y" ]; then
      dep_tristate '  Phillips ISP1161 USB host support' CONFIG_USB_ISP116X $CONFIG_USB
   fi

   comment 'USB Device Class drivers'
   dep_tristate '  USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
   dep_tristate '    EMI 2|6 USB Audio interface support' CONFIG_USB_EMI26 $CONFIG_USB_AUDIO
   dep_tristate '  USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
   dep_tristate '  USB MIDI support' CONFIG_USB_MIDI $CONFIG_USB
   if [ "$CONFIG_SCSI" = "n" ]; then
      comment '  SCSI support is needed for USB Storage'
   fi
   dep_tristate '  USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
      dep_mbool '    USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
      dep_mbool '    Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
      dep_mbool '    Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM  $CONFIG_USB_STORAGE
      dep_mbool '    ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
      dep_mbool '    Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
      dep_mbool '    HP CD-Writer 82xx support' CONFIG_USB_STORAGE_HP8200e $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
      dep_mbool '    SanDisk SDDR-09 (and other SmartMedia) support' CONFIG_USB_STORAGE_SDDR09 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
      dep_mbool '    SanDisk SDDR-55 SmartMedia support' CONFIG_USB_STORAGE_SDDR55 $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
      dep_mbool '    Lexar Jumpshot Compact Flash Reader' CONFIG_USB_STORAGE_JUMPSHOT $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
   dep_tristate '  USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
   dep_tristate '  USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB

   comment 'USB Human Interface Devices (HID)'
   dep_tristate '  USB Human Interface Device (full HID) support' CONFIG_USB_HID $CONFIG_USB
   if [ "$CONFIG_INPUT" = "n" ]; then
      comment '    Input core support is needed for USB HID input layer or HIDBP support'
   fi
      dep_mbool '    HID input layer support' CONFIG_USB_HIDINPUT $CONFIG_INPUT $CONFIG_USB_HID
      dep_mbool '    /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
   if [ "$CONFIG_USB_HID" != "y" ]; then
      dep_tristate '  USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
      dep_tristate '  USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
   fi
   dep_tristate '  Aiptek 6000U/8000U tablet support' CONFIG_USB_AIPTEK $CONFIG_USB $CONFIG_INPUT
   dep_tristate '  Wacom Intuos/Graphire tablet support' CONFIG_USB_WACOM $CONFIG_USB $CONFIG_INPUT

   comment 'USB Imaging devices'
   dep_tristate '  USB Kodak DC-2xx Camera support' CONFIG_USB_DC2XX $CONFIG_USB
   dep_tristate '  USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_USB_MDC800 $CONFIG_USB $CONFIG_EXPERIMENTAL
   dep_tristate '  USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
   dep_tristate '  Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
   dep_tristate '  HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI $CONFIG_USB $CONFIG_SCSI $CONFIG_EXPERIMENTAL

   comment 'USB Multimedia devices'
   if [ "$CONFIG_VIDEO_DEV" = "n" ]; then
      comment '  Video4Linux support is needed for USB Multimedia device support'
   else
      dep_tristate '  USB IBM (Xirlink) C-it Camera support' CONFIG_USB_IBMCAM $CONFIG_USB $CONFIG_VIDEO_DEV
      dep_tristate '  USB OV511 Camera support' CONFIG_USB_OV511 $CONFIG_USB $CONFIG_VIDEO_DEV
      dep_tristate '  USB Philips Cameras' CONFIG_USB_PWC $CONFIG_USB $CONFIG_VIDEO_DEV
      dep_tristate '  USB SE401 Camera support' CONFIG_USB_SE401 $CONFIG_USB $CONFIG_VIDEO_DEV
      dep_tristate '  USB STV680 (Pencam) Camera support' CONFIG_USB_STV680 $CONFIG_USB $CONFIG_VIDEO_DEV
      dep_tristate '  USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)' CONFIG_USB_VICAM $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
      dep_tristate '  D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV $CONFIG_EXPERIMENTAL
      dep_tristate '  DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
   fi

   comment 'USB Network adaptors'
   if [ "$CONFIG_NET" = "n" ]; then
      comment '  Networking support is needed for USB Networking device support'
   else
      dep_tristate '  USB Pegasus/Pegasus-II based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
      dep_tristate '  USB Realtek RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
      dep_tristate '  USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
      dep_tristate '  USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
      dep_tristate '  USB Communication Class Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
      dep_tristate '  USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
   fi

   comment 'USB port drivers'
   dep_tristate '  USS720 parport driver' CONFIG_USB_USS720 $CONFIG_USB $CONFIG_PARPORT
   source drivers/usb/serial/Config.in

   comment 'USB Miscellaneous drivers'
   dep_tristate '  USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
   dep_tristate '  USB Auerswald ISDN support (EXPERIMENTAL)' CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
   dep_tristate '  Texas Instruments Graph Link USB (aka SilverLink) cable support' CONFIG_USB_TIGL $CONFIG_USB
   dep_tristate '  Tieman Voyager USB Braille display support (EXPERIMENTAL)' CONFIG_USB_BRLVGER $CONFIG_USB $CONFIG_EXPERIMENTAL
   dep_tristate '  USB LCD device support' CONFIG_USB_LCD $CONFIG_USB
fi
if [ "$CONFIG_USB" = "y" -o  "$CONFIG_USB" = "m" ]; then
   comment 'USB DEVICE(S3C)drivers'
   dep_tristate '  USB Device(S3C) driver' CONFIG_USBDEVICE $CONFIG_USB
    if [ "$CONFIG_USBDEVICE" = "n" ]; then
      comment '  USB support is needed for USB device support'
   else
        source drivers/usb/usbd/Config.in
 fi
fi

endmenu