unusual_devs.h

S3C2440ARM9开发板的USB驱动程序

                "Portable USB Harddrive V2",
                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
                0 ),

UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
                "In-System",
                "Portable USB Harddrive V2",
                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
                0 ),

UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
                "In-System",
                "USB Storage Adapter V2",
                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
                0 ),

UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
                "Sony",
                "Portable USB Harddrive V2",
                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
                0 ),
#endif

#ifdef CONFIG_USB_STORAGE_JUMPSHOT
UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
		"Lexar",
		"Jumpshot USB CF Reader",
		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
		US_FL_MODE_XLATE ),
#endif

/* Reported by Blake Matheny <[e-mail]> */
UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
		"Lexar",
		"USB CF Reader",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

/* Reported by Carlos Villegas <[e-mail]>
 * This device needs an INQUIRY of exactly 36-bytes to function.
 * That is the only reason this entry is needed.
 */
UNUSUAL_DEV(  0x05e3, 0x0700, 0x0000, 0xffff,
		"SIIG",
		"CompactFlash Card Reader",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

/* Reported by Peter Marks <[e-mail]>
 * Like the SIIG unit above, this unit needs an INQUIRY to ask for exactly
 * 36 bytes of data.  No more, no less. That is the only reason this entry
 * is needed.
 *
 * ST818 slim drives (rev 0.02) don't need special care.
*/
UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0x0001,
		"EagleTec",
		"External Hard Disk",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100, 
		"TEAC",
		"Floppy Drive",
		US_SC_UFI, US_PR_CB, NULL, 0 ), 

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100, 
		"Olympus",
		"Camedia MAUSB-2",
		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),
#endif

/* Submitted by kedar@centillium
 * Needed for START_STOP flag, but that is unconfirmed */
UNUSUAL_DEV( 0x0686, 0x4006, 0x0001, 0x0001,
                "Minolta",
                "Dimage S304",
                US_SC_SCSI, US_PR_BULK, NULL,
                US_FL_START_STOP ),

/* Submitted by [e-mail]
 * Needed for START_STOP flag */
UNUSUAL_DEV( 0x0686, 0x4007, 0x0001, 0x0001,
                "Minolta",
                "Dimage S304",
                US_SC_SCSI, US_PR_BULK, NULL,
                US_FL_START_STOP ),

UNUSUAL_DEV( 0x0686, 0x400b, 0x0001, 0x0001, 
		"Minolta", 
		"Dimage 7i", 
		US_SC_SCSI, US_PR_BULK, NULL, 
		US_FL_START_STOP ),

UNUSUAL_DEV(  0x0693, 0x0002, 0x0100, 0x0100, 
		"Hagiwara",
		"FlashGate SmartMedia",
		US_SC_SCSI, US_PR_BULK, NULL, 0 ),

UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
		"Hagiwara",
		"Flashgate",
		US_SC_SCSI, US_PR_BULK, NULL, 0 ), 

UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200, 
		"Sandisk",
		"ImageMate SDDR-05a",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP),

UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009, 
		"Sandisk",
		"ImageMate SDDR-31",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_IGNORE_SER),

UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
                "Sandisk",
                "ImageMate SDDR-12",
                US_SC_SCSI, US_PR_CB, NULL,
                US_FL_SINGLE_LUN ),

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999, 
		"Sandisk",
		"ImageMate SDDR-09",
		US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
		US_FL_SINGLE_LUN | US_FL_START_STOP ),
#endif

#ifdef CONFIG_USB_STORAGE_FREECOM
UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
                "Freecom",
                "USB-IDE",
                US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
#endif

UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133, 
		"Microtech",
		"USB-SCSI-DB25",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ), 

UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100, 
		"Microtech",
		"USB-SCSI-HD50",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ), 

#ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
		"Microtech",
		"CameraMate (DPCM_USB)",
 		US_SC_SCSI, US_PR_DPCM_USB, NULL,
		US_FL_START_STOP ),
#endif

#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
		"Datafab",
		"MDCFE-B USB CF Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

	/*
	 * The following Datafab-based devices may or may not work
	 * using the current driver...the 0xffff is arbitrary since I
	 * don't know what device versions exist for these guys.
	 *
	 * The 0xa003 and 0xa004 devices in particular I'm curious about.
	 * I'm told they exist but so far nobody has come forward to say that
	 * they work with this driver.  Given the success we've had getting
	 * other Datafab-based cards operational with this driver, I've decided
	 * to leave these two devices in the list.
	 */
UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
		"SIIG/Datafab",
		"SIIG/Datafab Memory Stick+CF Reader/Writer",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
		"Datafab/Unknown",
		"Datafab-based Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
		"Datafab/Unknown",
		"Datafab-based Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
		"PNY/Datafab",
		"PNY/Datafab CF+SM Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
		"Simple Tech/Datafab",
		"Simple Tech/Datafab CF+SM Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),

/* Submitted by Olaf Hering <[e-mail]> */
UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
		"Datafab Systems, Inc.",
		"USB to CF + SM Combo (LC1)",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_MODE_XLATE ),
#endif

/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
 * to the USB storage specification in two ways:
 * - They tell us they are using transport protocol CBI. In reality they
 *   are using transport protocol CB.
 * - They don't like the INQUIRY command. So we must handle this command
 *   of the SCSI layer ourselves.
 */
UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9009,
                "Casio",
                "QV DigitalCamera",
                US_SC_8070, US_PR_CB, NULL,
                US_FL_FIX_INQUIRY ),

UNUSUAL_DEV(  0x097a, 0x0001, 0x0000, 0x0001,
		"Minds@Work",
		"Digital Wallet",
 		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_MODE_XLATE ),

#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
                "ATI",
                "USB Cable 205",
                US_SC_ISD200, US_PR_BULK, isd200_Initialization,
                0 ),
#endif

/* Submitted by Brian Hall <[e-mail]>
 * Needed for START_STOP flag */
UNUSUAL_DEV(  0x0c76, 0x0003, 0x0100, 0x0100,
		"JMTek",
		"USBDrive",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_START_STOP ),
UNUSUAL_DEV(  0x0c76, 0x0005, 0x0100, 0x0100,
		"JMTek",
		"USBDrive",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_START_STOP ),

/* Reported by Dan Pilone <[e-mail]>
 * The device needs the flags only.
 * Also reported by Brian Hall <[e-mail]>, again for flags.
 * I also suspect this device may have a broken serial number.
 */
UNUSUAL_DEV(  0x1065, 0x2136, 0x0000, 0x9999,
		"CCYU TECHNOLOGY",
		"EasyDisk Portable Device",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_MODE_XLATE | US_FL_START_STOP),

#ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999, 
		"Sandisk",
		"ImageMate SDDR55",
		US_SC_SCSI, US_PR_SDDR55, NULL,
		US_FL_SINGLE_LUN),
#endif