fun.h

从零开始学51单片机源代码

//fun.h
#include "intrins.h" 
//定义端口寄存器	 
sfr P0M0 = 0X93;
sfr P0M1 = 0X94;
sfr P1M0 = 0X91;
sfr P1M1 = 0X92;
sfr P2M0 = 0X95;
sfr P2M1 = 0X96;  
sfr P3M0 = 0Xb1;
sfr P3M1 = 0Xb2;

//定义EEPROM有关的寄存器
sfr IAP_DATA = 0xe2;
sfr IAP_ADDRH = 0xe3;
sfr IAP_ADDRL = 0xe4;
sfr IAP_CMD = 0xe5;
sfr IAP_TRIG = 0xe6;
sfr IAP_CONTR = 0xe7; 

#define fosc 11059200L
#define T0_50ms (65536 - (fosc/12/50000))  //50ms定时参数
sbit en1 = P2^6;
sbit en2 = P2^7;
unsigned char count_in_T0; //计数值 
unsigned char display_num; //显示值 

/*
共阴极数码管0 - 9的字形码 
“0” 3FH “5” 6DH  
“1” 06H “6” 7DH
“2” 5BH “7” 07H
“3” 4FH “8” 7FH
“4” 66H “9” 6FH 
*/
const unsigned char seg7[10] = { 0x3f, 0x06, 0x5b, 0x4f, 0x66,
								 0x6d, 0x7d, 0x07, 0x7f, 0x6f};     

void init_port()
{
	P0M1 = 0xff;
	P0M0 = 0xff; 
	P2M1 |= 0xc0;  
	P2M0 |= 0xc0;
	P3M1 = 0X04;  //p3.2输入
	P3M0 = 0x00;
}

void init_timer()
{
	TMOD |= 0X01;	//定时器0模式1，16bit
	TH0 = T0_50ms >> 8;	   //TH0 = T0_50ms / 256
	TL0 = T0_50ms;			//TL0 = T0_50ms % 256	
	ET0 = 1; //允许T0中断 
}

//定义延时函数
void ms_delay(unsigned int t)
{
	unsigned  int  i;
	for (t; t > 0; t--)	//外层循环t次	 
		for (i = 110;i > 0; i--)	//内层循环110次		   
		;
}

void display(unsigned char c2, unsigned char c1)
{
	P0 = seg7[c2];	//送入十位的段码 
	en2 = 0;	//显示DS2
	ms_delay(10);
	en2 = 1;	//关闭DS2	

	P0 = seg7[c1];	//送入个位的段码 
	en1 = 0;	//显示DS1
	ms_delay(10);
	en1 = 1;	//关闭DS1
}

unsigned char IAP_read (unsigned char addrh, unsigned char addrl)
{
    unsigned char edata;
    IAP_ADDRH = addrh; //送地址
    IAP_ADDRL = addrl;
    IAP_CMD = 0x01;  //读指令
    IAP_CONTR = 0x81; //允许操作，设置等待时间为01，20MHz以内
    IAP_TRIG = 0x46;  //触发指令
    IAP_TRIG = 0xb9;
    _nop_();
    edata = IAP_DATA;  //取数据
    return edata;
}

void  IAP_erase  (unsigned char addrh, unsigned char addrl)
{
    IAP_ADDRH = addrh; //送地址
    IAP_ADDRL = addrl;
    IAP_CMD = 0x03;  //扇区擦除指令
    IAP_CONTR = 0x81; //允许操作，设置等待时间为01，20MHz以内
    IAP_TRIG = 0x46;  //触发指令
    IAP_TRIG = 0xb9;
    _nop_();
}

void  IAP_write  (unsigned char addrh, unsigned char addrl, unsigned char edata)
{
    IAP_ADDRH = addrh; //送地址
    IAP_ADDRL = addrl;
    IAP_DATA = edata; //送数据
    IAP_CMD = 0x02;  //写指令
    IAP_CONTR = 0x81; //允许操作，设置等待时间为01，20MHz以内
    IAP_TRIG = 0x46;  //触发指令
    IAP_TRIG = 0xb9;
    _nop_();
}