fun.h

从零开始学51单片机源代码

#include "intrins.h"
//定义端口寄存器	 
sfr P0M0 = 0X93;
sfr P0M1 = 0X94;
sfr P1M0 = 0X91;
sfr P1M1 = 0X92;
sfr P2M0 = 0X95;
sfr P2M1 = 0X96;  
sfr P3M0 = 0Xb1;
sfr P3M1 = 0Xb2; 

sfr IE2 = 0xaf;
//定义SPI寄存器
sfr SPCTL = 0xce;
sfr SPSTAT = 0xcd;
sfr SPDAT = 0xcf;

sbit stcp = P1^4;
#define fosc 11059200L
#define T0_50ms (65536 - (fosc/12/50000))  //50ms定时参数
sbit en1 = P2^6;
sbit en2 = P2^7;
unsigned char display_num,count_in_T0;	//计数值 、进入定时器的次数
bit spilock;

/*
共阴极数码管0 - 9的字形码 
“0” 3FH “5” 6DH  
“1” 06H “6” 7DH
“2” 5BH “7” 07H
“3” 4FH “8” 7FH
“4” 66H “9” 6FH 
*/
const unsigned char seg7[10] = { 0x3f, 0x06, 0x5b, 0x4f, 0x66,
								 0x6d, 0x7d, 0x07, 0x7f, 0x6f};     

void init_port()
{
	P1M1 = 0x00;
	P1M0 = 0x00; 
}

void init_timer()
{
	TMOD |= 0X01;	//定时器0模式1，16bit
	TH0 = T0_50ms >> 8;	   //TH0 = T0_50ms / 256
	TL0 = T0_50ms;			//TL0 = T0_50ms % 256	
	ET0 = 1; //允许T0中断 
}

void init_spi()
{
 	SPDAT = 0; //数据清零 
	SPSTAT = 0xc0; //清除SPIF、WCOL
	SPCTL = 0xd0; //SSIG = 1, SPEN = 1,MSTR = 1;主模式 
	IE2 |= 0x02; //ESP1 = 1,开spi中断 
}

//定义延时函数
void ms_delay(unsigned int t)
{
	unsigned  int  i;
	for (t; t > 0; t--)	//外层循环t次	 
		for (i = 110;i > 0; i--)	//内层循环110次		   
		;
}

void display(unsigned char c2, unsigned char c1)
{
	spilock = 1; //锁spi 
	SPDAT = seg7[c2];	//送入十位的段码 
	while (spilock); //等待spi传输完成
	en2 = 0;	//显示DS2
	ms_delay(10);
	en2 = 1;	//关闭DS2	

	spilock = 1; //锁spi
	SPDAT = seg7[c1];	//送入个位的段码 
	while (spilock); //等待spi传输完成
	en1 = 0;	//显示DS1
	ms_delay(10);
	en1 = 1;	//关闭DS1
}