2410lib.c

arm 2410上的hdlc server 通信程序

#include<windows.h> 
#include<stdio.h> 

#include <stdarg.h>
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include "2410addr.h"
#define FCLK 202800000
#define HCLK (202800000/2)
#define PCLK (202800000/4)
#define UCLK PCLK

static int delayLoopCount = FCLK/10000/10;
static int whichUart=0;
void Uart_Select(int ch)
{
    whichUart = ch;
}

void Delay(int time)
{
      // time=0: adjust the Delay function by WatchDog timer.
      // time>0: the number of loop time
      // resolution of time is 100us.
    int i,adjust=0;
    if(time==0)
    {
        time   = 200;
        adjust = 1;
        delayLoopCount = 400;
            //PCLK/1M,Watch-dog disable,1/64,interrupt disable,reset disable
        rWTCON = ((PCLK/1000000-1)<<8)|(2<<3); 
        rWTDAT = 0xffff;                              //for first update
        rWTCNT = 0xffff;                              //resolution=64us @any PCLK 
        rWTCON = ((PCLK/1000000-1)<<8)|(2<<3)|(1<<5); //Watch-dog timer start
    }
    for(;time>0;time--)
        for(i=0;i<delayLoopCount;i++);
    if(adjust==1)
    {
        rWTCON = ((PCLK/1000000-1)<<8)|(2<<3);   //Watch-dog timer stop
        i = 0xffff - rWTCNT;                     //1count->64us, 200*400 cycle runtime = 64*i us
        delayLoopCount = 8000000/(i*64);         //200*400:64*i=1*x:100 -> x=80000*100/(64*i)   
    }
}

void Uart_SendByte(int data)
{
    if(whichUart==0)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT0 & 0x2));
            Delay(10);                 //because the slow response of hyper_terminal 
            WrUTXH0('\r');
        }
        while(!(rUTRSTAT0 & 0x2));   //Wait until THR is empty.
        Delay(10);
        WrUTXH0(data);
    }
    else if(whichUart==1)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT1 & 0x2));
            Delay(10);                 //because the slow response of hyper_terminal 
            rUTXH1 = '\r';
        }
        while(!(rUTRSTAT1 & 0x2));   //Wait until THR is empty.
        Delay(10);
        rUTXH1 = data;
    }   
    else if(whichUart==2)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT2 & 0x2));
            Delay(10);                 //because the slow response of hyper_terminal 
            rUTXH2 = '\r';
        }
        while(!(rUTRSTAT2 & 0x2));   //Wait until THR is empty.
        Delay(10);
        rUTXH2 = data;
    }       
}               

void Uart_SendString(char *pt)
{
    while(*pt)
        Uart_SendByte(*pt++);
}

void Uart_Printf(char *fmt,...)
{
    va_list ap;
    char string[256];

    va_start(ap,fmt);
    vsprintf(string,fmt,ap);
    Uart_SendString(string);
    va_end(ap);
}

void Uart_Init(int pclk,int baud)
{
    int i;
    
    if(pclk == 0)
    pclk    = PCLK;
    rUFCON0 = 0x0;   //UART channel 0 FIFO control register, FIFO disable
    rUFCON1 = 0x0;   //UART channel 1 FIFO control register, FIFO disable
    rUFCON2 = 0x0;   //UART channel 2 FIFO control register, FIFO disable
    rUMCON0 = 0x0;   //UART chaneel 0 MODEM control register, AFC disable
    rUMCON1 = 0x0;   //UART chaneel 1 MODEM control register, AFC disable
    
//UART0
    rULCON0 = 0x3;   //Line control register : Normal,No parity,1 stop,8 bits
     //    [10]       [9]     [8]        [7]        [6]      [5]         [4]           [3:2]        [1:0]
     // Clock Sel,  Tx Int,  Rx Int, Rx Time Out, Rx err, Loop-back, Send break,  Transmit Mode, Receive Mode
     //     0          1       0    ,     0          1        0           0     ,       01          01
     //   PCLK       Level    Pulse    Disable    Generate  Normal      Normal        Interrupt or Polling
    rUCON0  = 0x245;                        // Control register
//    rUBRDIV0=( (int)(pclk/16./baud) -1 );   //Baud rate divisior register 0
    rUBRDIV0=( (int)(pclk/16./baud+0.5) -1 );   //Baud rate divisior register 0    
    
//UART1
    rULCON1 = 0x3;
    rUCON1  = 0x245;
    rUBRDIV1=( (int)(pclk/16./baud) -1 );
    
//UART2
    rULCON2 = 0x3;
    rUCON2  = 0x245;
    rUBRDIV2=( (int)(pclk/16./baud) -1 );    

    for(i=0;i<100;i++);
}

//===================================================================

/*
void Uart_Select(int ch)
{
    whichUart = ch;
}
*/