staticv.h

rs485、八位扫描显示、按键、数字编码器

#if defined uchar
#else 
#define uchar unsigned char
#endif
#if defined uint
#else 
#define uint unsigned int
#endif
#define _a 0x77
#define _b 0x7c
#define _c 0x39
#define _d 0x5e
#define _e 0x79
#define _f 0x71
#define _g 0x3d
#define _h 0x76
#define _i 0x30
#define _j 0xe
#define _l 0x38
#define _n 0x37
#define _o 0x5c
#define _p 0x73
#define _q 0x67
#define _r 0x50
#define _s 0x6d
#define _t 0x78
#define _u 0x3e
#define _y 0x6e
#define _0 0x3f
#define _x 0x40
sbit key_esc=P1^5;
sbit key_prg=P1^4;
sbit key_up=P1^2;
sbit key_down=P1^3;
sbit key_run=P1^6;
sbit key_stop=P1^1;
sbit key_shift=P1^0;
sbit key_rev=P1^7;
code uchar led_8[16]={0x3f,0x6,0x5b,0x4f,0x66,0x6d,0x7d,0x7,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71};
code uchar s_ov[16]={0x02,0x12,0x09,0x5,0x28,0x11,0x12,0x22,0x3,0x11,0x02,0x02,0x02,0x11};	/*f0基本运行上限*/  
code uchar s_ovc[6][16]={
						   20, 100, 150, 200, 100, 100, 100, 100, 100, 100, 100, 100,  120, 10, 50,	21,/*f1辅助上限*/
						  100, 100, 100, 100,  1,  1,   5,   5,  100, 200, 100, 200,   1,   1,200, 200,/*模拟输入输出缎子*/
						   27,  27,  27,  27,  27,  27,  17,  17,  17,   0,   0,   0,   0,   0,   0,   0,/*开关量*/
							3,   1,   5,  1,  50, 50,  200, 200,  1, 200, 200, 200, 200,   200,   1,   1,/*pid*/
        				    5,   2,   1,   1,   1,   1,   1,   1,   1,   1,   1,   0,   0,   0,   0,   0,
					    	5,   2, 255,   1,   1, 200,   6,   0,   0,   0,   0,   0,   0,   0,   0,   0
						};
code uchar s_opp[6][16]={ 0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0x00,0x00,/*f1数据格式*/
						 0x20,0x20,0x20,0x20,0x00,0x00,0x00,0x00,0x20,0x11,0x20,0x11,0x00,0x00,0x00,0x00,/*模拟输入输出格式*/
						 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*开关两格式*/
						 0x00,0x00,0x00,0x00,0x21,0x21,0x11,0x20,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,
						 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
						 0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
						};
code uchar cm_o[11]={13,15,17,26,15,8,14,10,8,22,21};
code uint f9_o[22]={10,600,9999,9999,9999,500,500,9999,9999,200,200,9999,9999,9999,10,200,200,100,500,500,500,500};
code uint fa_o[18]={200,200,100,9999,100,9999,100,9999,100,9999,100,9999,100,9999,100,9999,100,9999};