⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 sbp2.h

📁 这是关于ieee1394的最新源码,上面包含了所有更新的部分!
💻 H
字号:
/* * sbp2.h - Defines and prototypes for sbp2.c * * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com) * jamesg@filanet.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */#ifndef SBP2_H#define SBP2_H#define SBP2_DEVICE_NAME		"sbp2"/* * SBP2 specific structures and defines */#define ORB_DIRECTION_WRITE_TO_MEDIA    0x0#define ORB_DIRECTION_READ_FROM_MEDIA   0x1#define ORB_DIRECTION_NO_DATA_TRANSFER  0x2#define ORB_SET_NULL_PTR(value)			((value & 0x1) << 31)#define ORB_SET_NOTIFY(value)			((value & 0x1) << 31)#define ORB_SET_RQ_FMT(value)			((value & 0x3) << 29)	/* unused ? */#define ORB_SET_NODE_ID(value)			((value & 0xffff) << 16)#define ORB_SET_STATUS_FIFO_HI(value, id)	(value >> 32 | ORB_SET_NODE_ID(id))#define ORB_SET_STATUS_FIFO_LO(value)		(value & 0xffffffff)#define ORB_SET_DATA_SIZE(value)		(value & 0xffff)#define ORB_SET_PAGE_SIZE(value)		((value & 0x7) << 16)#define ORB_SET_PAGE_TABLE_PRESENT(value)	((value & 0x1) << 19)#define ORB_SET_MAX_PAYLOAD(value)		((value & 0xf) << 20)#define ORB_SET_SPEED(value)			((value & 0x7) << 24)#define ORB_SET_DIRECTION(value)		((value & 0x1) << 27)struct sbp2_command_orb {	u32 next_ORB_hi;	u32 next_ORB_lo;	u32 data_descriptor_hi;	u32 data_descriptor_lo;	u32 misc;	u8 cdb[12];} __attribute__((packed));#define SBP2_LOGIN_REQUEST		0x0#define SBP2_QUERY_LOGINS_REQUEST	0x1#define SBP2_RECONNECT_REQUEST		0x3#define SBP2_SET_PASSWORD_REQUEST	0x4#define SBP2_LOGOUT_REQUEST		0x7#define SBP2_ABORT_TASK_REQUEST		0xb#define SBP2_ABORT_TASK_SET		0xc#define SBP2_LOGICAL_UNIT_RESET		0xe#define SBP2_TARGET_RESET_REQUEST	0xf#define ORB_SET_LUN(value)                      (value & 0xffff)#define ORB_SET_FUNCTION(value)                 ((value & 0xf) << 16)#define ORB_SET_RECONNECT(value)                ((value & 0xf) << 20)#define ORB_SET_EXCLUSIVE(value)                ((value & 0x1) << 28)#define ORB_SET_LOGIN_RESP_LENGTH(value)        (value & 0xffff)#define ORB_SET_PASSWD_LENGTH(value)            ((value & 0xffff) << 16)struct sbp2_login_orb {	u32 password_hi;	u32 password_lo;	u32 login_response_hi;	u32 login_response_lo;	u32 lun_misc;	u32 passwd_resp_lengths;	u32 status_fifo_hi;	u32 status_fifo_lo;} __attribute__((packed));#define RESPONSE_GET_LOGIN_ID(value)            (value & 0xffff)#define RESPONSE_GET_LENGTH(value)              ((value >> 16) & 0xffff)#define RESPONSE_GET_RECONNECT_HOLD(value)      (value & 0xffff)struct sbp2_login_response {	u32 length_login_ID;	u32 command_block_agent_hi;	u32 command_block_agent_lo;	u32 reconnect_hold;} __attribute__((packed));#define ORB_SET_LOGIN_ID(value)                 (value & 0xffff)#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff)struct sbp2_query_logins_orb {	u32 reserved1;	u32 reserved2;	u32 query_response_hi;	u32 query_response_lo;	u32 lun_misc;	u32 reserved_resp_length;	u32 status_fifo_hi;	u32 status_fifo_lo;} __attribute__((packed));#define RESPONSE_GET_MAX_LOGINS(value)          (value & 0xffff)#define RESPONSE_GET_ACTIVE_LOGINS(value)       ((RESPONSE_GET_LENGTH(value) - 4) / 12)struct sbp2_query_logins_response {	u32 length_max_logins;	u32 misc_IDs;	u32 initiator_misc_hi;	u32 initiator_misc_lo;} __attribute__((packed));struct sbp2_reconnect_orb {	u32 reserved1;	u32 reserved2;	u32 reserved3;	u32 reserved4;	u32 login_ID_misc;	u32 reserved5;	u32 status_fifo_hi;	u32 status_fifo_lo;} __attribute__((packed));struct sbp2_logout_orb {	u32 reserved1;	u32 reserved2;	u32 reserved3;	u32 reserved4;	u32 login_ID_misc;	u32 reserved5;	u32 status_fifo_hi;	u32 status_fifo_lo;} __attribute__((packed));#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value)   (value & 0xffff)#define PAGE_TABLE_SET_SEGMENT_LENGTH(value)    ((value & 0xffff) << 16)struct sbp2_unrestricted_page_table {	u32 length_segment_base_hi;	u32 segment_base_lo;} __attribute__((packed));#define RESP_STATUS_REQUEST_COMPLETE		0x0#define RESP_STATUS_TRANSPORT_FAILURE		0x1#define RESP_STATUS_ILLEGAL_REQUEST		0x2#define RESP_STATUS_VENDOR_DEPENDENT		0x3#define SBP2_STATUS_NO_ADDITIONAL_INFO		0x0#define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED	0x1#define SBP2_STATUS_SPEED_NOT_SUPPORTED		0x2#define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED	0x3#define SBP2_STATUS_ACCESS_DENIED		0x4#define SBP2_STATUS_LU_NOT_SUPPORTED		0x5#define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL	0x6#define SBP2_STATUS_RESOURCES_UNAVAILABLE	0x8#define SBP2_STATUS_FUNCTION_REJECTED		0x9#define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED	0xa#define SBP2_STATUS_DUMMY_ORB_COMPLETED		0xb#define SBP2_STATUS_REQUEST_ABORTED		0xc#define SBP2_STATUS_UNSPECIFIED_ERROR		0xff#define SFMT_CURRENT_ERROR			0x0#define SFMT_DEFERRED_ERROR			0x1#define SFMT_VENDOR_DEPENDENT_STATUS		0x3#define SBP2_SCSI_STATUS_GOOD			0x0#define SBP2_SCSI_STATUS_CHECK_CONDITION	0x2#define SBP2_SCSI_STATUS_CONDITION_MET		0x4#define SBP2_SCSI_STATUS_BUSY			0x8#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT	0x18#define SBP2_SCSI_STATUS_COMMAND_TERMINATED	0x22#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT	0xff#define STATUS_GET_SRC(value)			(((value) >> 30) & 0x3)#define STATUS_GET_RESP(value)			(((value) >> 28) & 0x3)#define STATUS_GET_LEN(value)			(((value) >> 24) & 0x7)#define STATUS_GET_SBP_STATUS(value)		(((value) >> 16) & 0xff)#define STATUS_GET_ORB_OFFSET_HI(value)		((value) & 0x0000ffff)#define STATUS_TEST_DEAD(value)			((value) & 0x08000000)/* test 'resp' | 'dead' | 'sbp2_status' */#define STATUS_TEST_RDS(value)			((value) & 0x38ff0000)struct sbp2_status_block {	u32 ORB_offset_hi_misc;	u32 ORB_offset_lo;	u8 command_set_dependent[24];} __attribute__((packed));/* * Miscellaneous SBP2 related config rom defines */#define SBP2_UNIT_DIRECTORY_OFFSET_KEY				0xd1#define SBP2_CSR_OFFSET_KEY					0x54#define SBP2_UNIT_SPEC_ID_KEY					0x12#define SBP2_UNIT_SW_VERSION_KEY				0x13#define SBP2_COMMAND_SET_SPEC_ID_KEY				0x38#define SBP2_COMMAND_SET_KEY					0x39#define SBP2_UNIT_CHARACTERISTICS_KEY				0x3a#define SBP2_DEVICE_TYPE_AND_LUN_KEY				0x14#define SBP2_FIRMWARE_REVISION_KEY				0x3c#define SBP2_AGENT_STATE_OFFSET					0x00ULL#define SBP2_AGENT_RESET_OFFSET					0x04ULL#define SBP2_ORB_POINTER_OFFSET					0x08ULL#define SBP2_DOORBELL_OFFSET					0x10ULL#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET			0x14ULL#define SBP2_UNSOLICITED_STATUS_VALUE				0xf#define SBP2_BUSY_TIMEOUT_ADDRESS				0xfffff0000210ULL#define SBP2_BUSY_TIMEOUT_VALUE					0xf#define SBP2_AGENT_RESET_DATA					0xf/* * Unit spec id and sw version entry for SBP-2 devices */#define SBP2_UNIT_SPEC_ID_ENTRY					0x0000609e#define SBP2_SW_VERSION_ENTRY					0x00010483/* * SCSI specific stuff */#define SBP2_MAX_SG_ELEMENT_LENGTH	0xf000#define SBP2_MAX_SECTORS		255	/* Max sectors supported */#define SBP2_MAX_CMDS			8	/* This should be safe *//* Flags for detected oddities and brokeness */#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1#define SBP2_WORKAROUND_INQUIRY_36	0x2#define SBP2_WORKAROUND_MODE_SENSE_8	0x4#define SBP2_WORKAROUND_FIX_CAPACITY	0x8#define SBP2_WORKAROUND_OVERRIDE	0x100/* This is the two dma types we use for cmd_dma below */enum cmd_dma_types {	CMD_DMA_NONE,	CMD_DMA_PAGE,	CMD_DMA_SINGLE};/* * Encapsulates all the info necessary for an outstanding command. */struct sbp2_command_info {	struct list_head list;	struct sbp2_command_orb command_orb ____cacheline_aligned;	dma_addr_t command_orb_dma ____cacheline_aligned;	struct scsi_cmnd *Current_SCpnt;	void (*Current_done)(struct scsi_cmnd *);	/* Also need s/g structure for each sbp2 command */	struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned;	dma_addr_t sge_dma ____cacheline_aligned;	void *sge_buffer;	dma_addr_t cmd_dma;	enum cmd_dma_types dma_type;	unsigned long dma_size;	int dma_dir;};struct sbp2scsi_host_info;/* * Information needed on a per scsi id basis (one for each sbp2 device) */struct scsi_id_instance_data {	/*	 * Various sbp2 specific structures	 */	struct sbp2_command_orb *last_orb;	dma_addr_t last_orb_dma;	struct sbp2_login_orb *login_orb;	dma_addr_t login_orb_dma;	struct sbp2_login_response *login_response;	dma_addr_t login_response_dma;	struct sbp2_query_logins_orb *query_logins_orb;	dma_addr_t query_logins_orb_dma;	struct sbp2_query_logins_response *query_logins_response;	dma_addr_t query_logins_response_dma;	struct sbp2_reconnect_orb *reconnect_orb;	dma_addr_t reconnect_orb_dma;	struct sbp2_logout_orb *logout_orb;	dma_addr_t logout_orb_dma;	struct sbp2_status_block status_block;	/*	 * Stuff we need to know about the sbp2 device itself	 */	u64 sbp2_management_agent_addr;	u64 sbp2_command_block_agent_addr;	u32 speed_code;	u32 max_payload_size;	/*	 * Values pulled from the device's unit directory	 */	u32 sbp2_command_set_spec_id;	u32 sbp2_command_set;	u32 sbp2_unit_characteristics;	u32 sbp2_lun;	u32 sbp2_firmware_revision;	/*	 * Address for the device to write status blocks to	 */	u64 status_fifo_addr;	/*	 * Waitqueue flag for logins, reconnects, logouts, query logins	 */	int access_complete:1;	/*	 * Pool of command orbs, so we can have more than overlapped command per id	 */	spinlock_t sbp2_command_orb_lock;	struct list_head sbp2_command_orb_inuse;	struct list_head sbp2_command_orb_completed;	struct list_head scsi_list;	/* Node entry, as retrieved from NodeMgr entries */	struct node_entry *ne;	struct unit_directory *ud;	/* A backlink to our host_info */	struct sbp2scsi_host_info *hi;	/* SCSI related pointers */	struct scsi_device *sdev;	struct Scsi_Host *scsi_host;	/* Device specific workarounds/brokeness */	unsigned workarounds;	atomic_t state;	struct work_struct protocol_work;};/* For use in scsi_id_instance_data.state */enum sbp2lu_state_types {	SBP2LU_STATE_RUNNING,		/* all normal */	SBP2LU_STATE_IN_RESET,		/* between bus reset and reconnect */	SBP2LU_STATE_IN_SHUTDOWN	/* when sbp2_remove was called */};/* Sbp2 host data structure (one per IEEE1394 host) */struct sbp2scsi_host_info {	struct hpsb_host *host;		/* IEEE1394 host */	struct list_head scsi_ids;	/* List of scsi ids on this host */};/* * Function prototypes *//* * Various utility prototypes */static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id);static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id);static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb);static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt);static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id,							  struct scsi_cmnd *Current_SCpnt,							  void (*Current_done)(struct scsi_cmnd *));static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,		struct sbp2_command_info *command);static int sbp2_start_device(struct scsi_id_instance_data *scsi_id);static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id);#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMAstatic int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data,                                     u64 addr, size_t length, u16 flags);static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data,                                    u64 addr, size_t length, u16 flags);#endif/* * SBP-2 protocol related prototypes */static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id);static int sbp2_login_device(struct scsi_id_instance_data *scsi_id);static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id);static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id);static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,				    quadlet_t *data, u64 addr, size_t length, u16 flags);static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait);static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,					      unchar *sense_data);static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,				      struct unit_directory *ud);static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id);#endif /* SBP2_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -