📄 ext3_fs.h
字号:
/*
* linux/include/linux/ext3_fs.h
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/include/linux/minix_fs.h
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
#ifndef _LINUX_EXT3_FS_H
#define _LINUX_EXT3_FS_H
#include <linux/types.h>
#include <linux/ext3_fs_i.h>
#include <linux/ext3_fs_sb.h>
struct statfs;
/*
* The second extended filesystem constants/structures
*/
/*
* Define EXT3FS_DEBUG to produce debug messages
*/
#undef EXT3FS_DEBUG
/*
* Define EXT3_RESERVATION to reserve data blocks for expanding files
*/
#define EXT3_DEFAULT_RESERVE_BLOCKS 8
#define EXT3_MAX_RESERVE_BLOCKS 1024
#define EXT3_RESERVE_WINDOW_NOT_ALLOCATED 0
/*
* Always enable hashed directories
*/
#define CONFIG_EXT3_INDEX
/*
* Debug code
*/
#ifdef EXT3FS_DEBUG
#define ext3_debug(f, a...) \
do { \
printk (KERN_DEBUG "EXT3-fs DEBUG (%s, %d): %s:", \
__FILE__, __LINE__, __FUNCTION__); \
printk (KERN_DEBUG f, ## a); \
} while (0)
#else
#define ext3_debug(f, a...) do {} while (0)
#endif
/*
* Special inodes numbers
*/
#define EXT3_BAD_INO 1 /* Bad blocks inode */
#define EXT3_ROOT_INO 2 /* Root inode */
#define EXT3_BOOT_LOADER_INO 5 /* Boot loader inode */
#define EXT3_UNDEL_DIR_INO 6 /* Undelete directory inode */
#define EXT3_RESIZE_INO 7 /* Reserved group descriptors inode */
#define EXT3_JOURNAL_INO 8 /* Journal inode */
/* First non-reserved inode for old ext3 filesystems */
#define EXT3_GOOD_OLD_FIRST_INO 11
/*
* The second extended file system magic number
*/
#define EXT3_SUPER_MAGIC 0xEF53
/*
* Maximal count of links to a file
*/
#define EXT3_LINK_MAX 32000
/*
* Macro-instructions used to manage several block sizes
*/
#define EXT3_MIN_BLOCK_SIZE 1024
#define EXT3_MAX_BLOCK_SIZE 4096
#define EXT3_MIN_BLOCK_LOG_SIZE 10
#ifdef __KERNEL__
# define EXT3_BLOCK_SIZE(s) ((s)->s_blocksize)
#else
# define EXT3_BLOCK_SIZE(s) (EXT3_MIN_BLOCK_SIZE << (s)->s_log_block_size)
#endif
#define EXT3_ADDR_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (__u32))
#ifdef __KERNEL__
# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits)
#else
# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)
#endif
#ifdef __KERNEL__
#define EXT3_ADDR_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_addr_per_block_bits)
#define EXT3_INODE_SIZE(s) (EXT3_SB(s)->s_inode_size)
#define EXT3_FIRST_INO(s) (EXT3_SB(s)->s_first_ino)
#else
#define EXT3_INODE_SIZE(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \
EXT3_GOOD_OLD_INODE_SIZE : \
(s)->s_inode_size)
#define EXT3_FIRST_INO(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \
EXT3_GOOD_OLD_FIRST_INO : \
(s)->s_first_ino)
#endif
/*
* Macro-instructions used to manage fragments
*/
#define EXT3_MIN_FRAG_SIZE 1024
#define EXT3_MAX_FRAG_SIZE 4096
#define EXT3_MIN_FRAG_LOG_SIZE 10
#ifdef __KERNEL__
# define EXT3_FRAG_SIZE(s) (EXT3_SB(s)->s_frag_size)
# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_SB(s)->s_frags_per_block)
#else
# define EXT3_FRAG_SIZE(s) (EXT3_MIN_FRAG_SIZE << (s)->s_log_frag_size)
# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / EXT3_FRAG_SIZE(s))
#endif
/*
* Structure of a blocks group descriptor
*/
struct ext3_group_desc
{
__le32 bg_block_bitmap; /* Blocks bitmap block */
__le32 bg_inode_bitmap; /* Inodes bitmap block */
__le32 bg_inode_table; /* Inodes table block */
__le16 bg_free_blocks_count; /* Free blocks count */
__le16 bg_free_inodes_count; /* Free inodes count */
__le16 bg_used_dirs_count; /* Directories count */
__u16 bg_pad;
__le32 bg_reserved[3];
};
/*
* Macro-instructions used to manage group descriptors
*/
#ifdef __KERNEL__
# define EXT3_BLOCKS_PER_GROUP(s) (EXT3_SB(s)->s_blocks_per_group)
# define EXT3_DESC_PER_BLOCK(s) (EXT3_SB(s)->s_desc_per_block)
# define EXT3_INODES_PER_GROUP(s) (EXT3_SB(s)->s_inodes_per_group)
# define EXT3_DESC_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_desc_per_block_bits)
#else
# define EXT3_BLOCKS_PER_GROUP(s) ((s)->s_blocks_per_group)
# define EXT3_DESC_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (struct ext3_group_desc))
# define EXT3_INODES_PER_GROUP(s) ((s)->s_inodes_per_group)
#endif
/*
* Constants relative to the data blocks
*/
#define EXT3_NDIR_BLOCKS 12
#define EXT3_IND_BLOCK EXT3_NDIR_BLOCKS
#define EXT3_DIND_BLOCK (EXT3_IND_BLOCK + 1)
#define EXT3_TIND_BLOCK (EXT3_DIND_BLOCK + 1)
#define EXT3_N_BLOCKS (EXT3_TIND_BLOCK + 1)
/*
* Inode flags
*/
#define EXT3_SECRM_FL 0x00000001 /* Secure deletion */
#define EXT3_UNRM_FL 0x00000002 /* Undelete */
#define EXT3_COMPR_FL 0x00000004 /* Compress file */
#define EXT3_SYNC_FL 0x00000008 /* Synchronous updates */
#define EXT3_IMMUTABLE_FL 0x00000010 /* Immutable file */
#define EXT3_APPEND_FL 0x00000020 /* writes to file may only append */
#define EXT3_NODUMP_FL 0x00000040 /* do not dump file */
#define EXT3_NOATIME_FL 0x00000080 /* do not update atime */
/* Reserved for compression usage... */
#define EXT3_DIRTY_FL 0x00000100
#define EXT3_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
#define EXT3_NOCOMPR_FL 0x00000400 /* Don't compress */
#define EXT3_ECOMPR_FL 0x00000800 /* Compression error */
/* End compression flags --- maybe not all used */
#define EXT3_INDEX_FL 0x00001000 /* hash-indexed directory */
#define EXT3_IMAGIC_FL 0x00002000 /* AFS directory */
#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */
#define EXT3_NOTAIL_FL 0x00008000 /* file tail should not be merged */
#define EXT3_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
#define EXT3_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
#define EXT3_RESERVED_FL 0x80000000 /* reserved for ext3 lib */
#define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
#define EXT3_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
/*
* Inode dynamic state flags
*/
#define EXT3_STATE_JDATA 0x00000001 /* journaled data exists */
#define EXT3_STATE_NEW 0x00000002 /* inode is newly created */
#define EXT3_STATE_XATTR 0x00000004 /* has in-inode xattrs */
/* Used to pass group descriptor data when online resize is done */
struct ext3_new_group_input {
__u32 group; /* Group number for this data */
__u32 block_bitmap; /* Absolute block number of block bitmap */
__u32 inode_bitmap; /* Absolute block number of inode bitmap */
__u32 inode_table; /* Absolute block number of inode table start */
__u32 blocks_count; /* Total number of blocks in this group */
__u16 reserved_blocks; /* Number of reserved blocks in this group */
__u16 unused;
};
/* The struct ext3_new_group_input in kernel space, with free_blocks_count */
struct ext3_new_group_data {
__u32 group;
__u32 block_bitmap;
__u32 inode_bitmap;
__u32 inode_table;
__u32 blocks_count;
__u16 reserved_blocks;
__u16 unused;
__u32 free_blocks_count;
};
/*
* ioctl commands
*/
#define EXT3_IOC_GETFLAGS _IOR('f', 1, long)
#define EXT3_IOC_SETFLAGS _IOW('f', 2, long)
#define EXT3_IOC_GETVERSION _IOR('f', 3, long)
#define EXT3_IOC_SETVERSION _IOW('f', 4, long)
#define EXT3_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long)
#define EXT3_IOC_GROUP_ADD _IOW('f', 8,struct ext3_new_group_input)
#define EXT3_IOC_GETVERSION_OLD _IOR('v', 1, long)
#define EXT3_IOC_SETVERSION_OLD _IOW('v', 2, long)
#ifdef CONFIG_JBD_DEBUG
#define EXT3_IOC_WAIT_FOR_READONLY _IOR('f', 99, long)
#endif
#define EXT3_IOC_GETRSVSZ _IOR('f', 5, long)
#define EXT3_IOC_SETRSVSZ _IOW('f', 6, long)
/*
* Structure of an inode on the disk
*/
struct ext3_inode {
__le16 i_mode; /* File mode */
__le16 i_uid; /* Low 16 bits of Owner Uid */
__le32 i_size; /* Size in bytes */
__le32 i_atime; /* Access time */
__le32 i_ctime; /* Creation time */
__le32 i_mtime; /* Modification time */
__le32 i_dtime; /* Deletion Time */
__le16 i_gid; /* Low 16 bits of Group Id */
__le16 i_links_count; /* Links count */
__le32 i_blocks; /* Blocks count */
__le32 i_flags; /* File flags */
union {
struct {
__u32 l_i_reserved1;
} linux1;
struct {
__u32 h_i_translator;
} hurd1;
struct {
__u32 m_i_reserved1;
} masix1;
} osd1; /* OS dependent 1 */
__le32 i_block[EXT3_N_BLOCKS];/* Pointers to blocks */
__le32 i_generation; /* File version (for NFS) */
__le32 i_file_acl; /* File ACL */
__le32 i_dir_acl; /* Directory ACL */
__le32 i_faddr; /* Fragment address */
union {
struct {
__u8 l_i_frag; /* Fragment number */
__u8 l_i_fsize; /* Fragment size */
__u16 i_pad1;
__le16 l_i_uid_high; /* these 2 fields */
__le16 l_i_gid_high; /* were reserved2[0] */
__u32 l_i_reserved2;
} linux2;
struct {
__u8 h_i_frag; /* Fragment number */
__u8 h_i_fsize; /* Fragment size */
__u16 h_i_mode_high;
__u16 h_i_uid_high;
__u16 h_i_gid_high;
__u32 h_i_author;
} hurd2;
struct {
__u8 m_i_frag; /* Fragment number */
__u8 m_i_fsize; /* Fragment size */
__u16 m_pad1;
__u32 m_i_reserved2[2];
} masix2;
} osd2; /* OS dependent 2 */
__le16 i_extra_isize;
__le16 i_pad1;
};
#define i_size_high i_dir_acl
#if defined(__KERNEL__) || defined(__linux__)
#define i_reserved1 osd1.linux1.l_i_reserved1
#define i_frag osd2.linux2.l_i_frag
#define i_fsize osd2.linux2.l_i_fsize
#define i_uid_low i_uid
#define i_gid_low i_gid
#define i_uid_high osd2.linux2.l_i_uid_high
#define i_gid_high osd2.linux2.l_i_gid_high
#define i_reserved2 osd2.linux2.l_i_reserved2
#elif defined(__GNU__)
#define i_translator osd1.hurd1.h_i_translator
#define i_frag osd2.hurd2.h_i_frag;
#define i_fsize osd2.hurd2.h_i_fsize;
#define i_uid_high osd2.hurd2.h_i_uid_high
#define i_gid_high osd2.hurd2.h_i_gid_high
#define i_author osd2.hurd2.h_i_author
#elif defined(__masix__)
#define i_reserved1 osd1.masix1.m_i_reserved1
#define i_frag osd2.masix2.m_i_frag
#define i_fsize osd2.masix2.m_i_fsize
#define i_reserved2 osd2.masix2.m_i_reserved2
#endif /* defined(__KERNEL__) || defined(__linux__) */
/*
* File system states
*/
#define EXT3_VALID_FS 0x0001 /* Unmounted cleanly */
#define EXT3_ERROR_FS 0x0002 /* Errors detected */
#define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */
/*
* Mount flags
*/
#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */
#define EXT3_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */
#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */
#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */
#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */
#define EXT3_MOUNT_ERRORS_RO 0x00020 /* Remount fs ro on errors */
#define EXT3_MOUNT_ERRORS_PANIC 0x00040 /* Panic on errors */
#define EXT3_MOUNT_MINIX_DF 0x00080 /* Mimics the Minix statfs */
#define EXT3_MOUNT_NOLOAD 0x00100 /* Don't use existing journal*/
#define EXT3_MOUNT_ABORT 0x00200 /* Fatal error detected */
#define EXT3_MOUNT_DATA_FLAGS 0x00C00 /* Mode for data writes: */
#define EXT3_MOUNT_JOURNAL_DATA 0x00400 /* Write data to journal */
#define EXT3_MOUNT_ORDERED_DATA 0x00800 /* Flush data before commit */
#define EXT3_MOUNT_WRITEBACK_DATA 0x00C00 /* No data ordering */
#define EXT3_MOUNT_UPDATE_JOURNAL 0x01000 /* Update the journal format */
#define EXT3_MOUNT_NO_UID32 0x02000 /* Disable 32-bit UIDs */
#define EXT3_MOUNT_XATTR_USER 0x04000 /* Extended user attributes */
#define EXT3_MOUNT_POSIX_ACL 0x08000 /* POSIX Access Control Lists */
#define EXT3_MOUNT_RESERVATION 0x10000 /* Preallocation */
#define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */
#define EXT3_MOUNT_NOBH 0x40000 /* No bufferheads */
/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */
#ifndef _LINUX_EXT2_FS_H
#define clear_opt(o, opt) o &= ~EXT3_MOUNT_##opt
#define set_opt(o, opt) o |= EXT3_MOUNT_##opt
#define test_opt(sb, opt) (EXT3_SB(sb)->s_mount_opt & \
EXT3_MOUNT_##opt)
#else
#define EXT2_MOUNT_NOLOAD EXT3_MOUNT_NOLOAD
#define EXT2_MOUNT_ABORT EXT3_MOUNT_ABORT
#define EXT2_MOUNT_DATA_FLAGS EXT3_MOUNT_DATA_FLAGS
#endif
#define ext3_set_bit ext2_set_bit
#define ext3_set_bit_atomic ext2_set_bit_atomic
#define ext3_clear_bit ext2_clear_bit
#define ext3_clear_bit_atomic ext2_clear_bit_atomic
#define ext3_test_bit ext2_test_bit
#define ext3_find_first_zero_bit ext2_find_first_zero_bit
#define ext3_find_next_zero_bit ext2_find_next_zero_bit
/*
* Maximal mount counts between two filesystem checks
*/
#define EXT3_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */
#define EXT3_DFL_CHECKINTERVAL 0 /* Don't use interval check */
/*
* Behaviour when detecting errors
*/
#define EXT3_ERRORS_CONTINUE 1 /* Continue execution */
#define EXT3_ERRORS_RO 2 /* Remount fs read-only */
#define EXT3_ERRORS_PANIC 3 /* Panic */
#define EXT3_ERRORS_DEFAULT EXT3_ERRORS_CONTINUE
/*
* Structure of the super block
*/
struct ext3_super_block {
/*00*/ __le32 s_inodes_count; /* Inodes count */
__le32 s_blocks_count; /* Blocks count */
__le32 s_r_blocks_count; /* Reserved blocks count */
__le32 s_free_blocks_count; /* Free blocks count */
/*10*/ __le32 s_free_inodes_count; /* Free inodes count */
__le32 s_first_data_block; /* First Data Block */
__le32 s_log_block_size; /* Block size */
__le32 s_log_frag_size; /* Fragment size */
/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */
__le32 s_frags_per_group; /* # Fragments per group */
__le32 s_inodes_per_group; /* # Inodes per group */
__le32 s_mtime; /* Mount time */
/*30*/ __le32 s_wtime; /* Write time */
__le16 s_mnt_count; /* Mount count */
__le16 s_max_mnt_count; /* Maximal mount count */
__le16 s_magic; /* Magic signature */
__le16 s_state; /* File system state */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -