flashdev.c

umon bootloader source code, support mips cpu.

/* This file contains all of the flash support code that does not need
 * to be relocated to RAM.  Two separate files (flash.c and flashpic.c)
 * are maintained because under certain compilers, they may need to be
 * compiled with different options to be made position independent.
 *
 * NOTE: THESE FUNCTIONS ARE NOT RE-ENTRANT!!!  All of the FLASH routines
 * assume they can copy themselves into the array FlashFunc[]; hence, only
 * one operation can be active at any time.
 */
#include "config.h"
#if INCLUDE_FLASH
#include "cpu.h"
#include "stddefs.h"
#include "flashdev.h"
#include "flash.h"

extern int FLASHTYPE();
extern int ENDFLASHTYPE();
extern int FLASHWRITE();
extern int ENDFLASHWRITE();
extern int FLASHEWRITE();
extern int ENDFLASHEWRITE();
extern int FLASHERASE();
extern int ENDFLASHERASE();

/* FlashXXXFbuf[]:
 * These arrays will contain the flash operation function that is executing.
 * Recall that to operate on the flash, you cannot be executing out of it.
 * The flash functions are copied here, then executed through the function
 * pointer flashfunc which is set to point to FlashFunc.
 */
ulong    FlashTypeFbuf[FLASHFUNCSIZE];
ulong    FlashEraseFbuf[FLASHFUNCSIZE];
ulong    FlashWriteFbuf[FLASHFUNCSIZE];
ulong    FlashEwriteFbuf[FLASHFUNCSIZE];

/* FlashBank[]:
 * This structure contains all of the information that must be made available
 * to the various flash operation commands.  It is initialized by flashtype()
 * and used thereafter by the other operations.
 */
struct	flashinfo FlashBank[FLASHBANKS];

/* FlashNamId[]:
 * Used to correlate between the ID and a string representing the name
 * of the flash device. 
 */
struct flashdesc FlashNamId[] = {
		{ AMD29PL160C,	"AMD-29PL160C" }, 
		{ 0,	(char *)0 },
};

/* SectorSizes160C:
 *	There are a total of 11 sectors for this part.  This table reflects the
 *	size of each sector based on the fact that this configuration is for a
 *	x16 configuration.
 */
int	SectorSizes160C[] = {
		0x4000,  0x2000,  0x2000,  0x38000, 0x40000,
		0x40000, 0x40000, 0x40000, 0x40000, 0x40000,
		0x40000
};

struct sectorinfo sinfo160[10];

/* FlashInit():
 * Initialize data structures for each bank of flash...
 */
int
FlashInit()
{
	int	i,	snum;
	uchar	*begin;
	struct	flashinfo *fbnk;

	snum = 0;
	FlashCurrentBank = 0;

	/* Copy functions to ram space... */
	/* Note that this MUST be done when cache is disabled to assure that */
	/* the RAM is occupied by the designated block of code. */

	if (flashopload((ulong *)FLASHTYPE,(ulong *)ENDFLASHTYPE,
		FlashTypeFbuf,sizeof(FlashTypeFbuf)) < 0)
		return(-1);
	if (flashopload((ulong *)FLASHERASE,(ulong *)ENDFLASHERASE,
		FlashEraseFbuf,sizeof(FlashEraseFbuf)) < 0)
		return(-1);
	if (flashopload((ulong *)FLASHEWRITE,(ulong *)ENDFLASHEWRITE,
		FlashEwriteFbuf,sizeof(FlashEwriteFbuf)) < 0)
		return(-1);
	if (flashopload((ulong *)FLASHWRITE,(ulong *)ENDFLASHWRITE,
		FlashWriteFbuf,sizeof(FlashWriteFbuf)) < 0)
		return(-1);

	fbnk = &FlashBank[0];
	fbnk->id = AMD29PL160C;
	fbnk->base = (unsigned char *)FLASH_BANK0_BASE_ADDR;
	fbnk->end = fbnk->base + 0x3fffff;
	fbnk->sectorcnt = sizeof(SectorSizes160C)/sizeof(int);
	fbnk->width = FLASH_BANK0_WIDTH;
	fbnk->fltype = (int(*)())FlashTypeFbuf;			/* flashtype(). */
	fbnk->flerase = (int(*)())FlashEraseFbuf;		/* flasherase(). */
	fbnk->flwrite = (int(*)())FlashWriteFbuf;		/* flashwrite(). */
	fbnk->flewrite = (int(*)())FlashEwriteFbuf;		/* flashewrite(). */
	fbnk->sectors = sinfo160;

	begin = fbnk->base;
	
printf("type = 0x%lx\n",FLASHTYPE());
	for(i=0;i<fbnk->sectorcnt;i++,snum++) {
		int	ssize;

		ssize = SectorSizes160C[i];
		fbnk->sectors[i].snum = snum;
		fbnk->sectors[i].size = ssize;
		fbnk->sectors[i].begin = begin;
		fbnk->sectors[i].end =
		    fbnk->sectors[i].begin + ssize - 1;
		fbnk->sectors[i].protected = 0;
		begin += ssize;
	}

	sectorProtect(FLASH_PROTECT_RANGE,1);

	/* Additional flash memory banks would be initialized here... */
	return(0);
}

#endif