📄 mod_register.c
字号:
/* -------------------------------------------------------------------------- * * License * * The contents of this file are subject to the Jabber Open Source License * Version 1.0 (the "JOSL"). You may not copy or use this file, in either * source code or executable form, except in compliance with the JOSL. You * may obtain a copy of the JOSL at http://www.jabber.org/ or at * http://www.opensource.org/. * * Software distributed under the JOSL is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the JOSL * for the specific language governing rights and limitations under the * JOSL. * * Copyrights * * Portions created by or assigned to Jabber.com, Inc. are * Copyright (c) 1999-2002 Jabber.com, Inc. All Rights Reserved. Contact * information for Jabber.com, Inc. is available at http://www.jabber.com/. * * Portions Copyright (c) 1998-1999 Jeremie Miller. * * Acknowledgements * * Special thanks to the Jabber Open Source Contributors for their * suggestions and support of Jabber. * * Alternatively, the contents of this file may be used under the terms of the * GNU General Public License Version 2 or later (the "GPL"), in which case * the provisions of the GPL are applicable instead of those above. If you * wish to allow use of your version of this file only under the terms of the * GPL and not to allow others to use your version of this file under the JOSL, * indicate your decision by deleting the provisions above and replace them * with the notice and other provisions required by the GPL. If you do not * delete the provisions above, a recipient may use your version of this file * under either the JOSL or the GPL. * * * --------------------------------------------------------------------------*/#include "jsm.h"/** * @file mod_register.c * @brief handles in-band registrations (JEP-0077) * * This module implements the functionality used to register and unregister accounts on the Jabber * server and to change passwords. * * It can be configured to send a welcome message to the user on successful registration. * * @todo allow the admin to change passwords of other users and delete their accounts (JEP-0133?) *//** * handle new user registration requests * * Handles new user registration requests and sends a welcome message to the new user, * if configured to do so. * * @param m the mapi structure * @param arg unused/ignored * @return M_PASS if registration is not allowed, or iq not of type set or get, M_HANDLED else */mreturn mod_register_new(mapi m, void *arg){ xmlnode reg, x; if((reg = js_config(m->si, "register")) == NULL) return M_PASS; log_debug2(ZONE, LOGT_AUTH, "checking"); switch(jpacket_subtype(m->packet)) { case JPACKET__GET: /* copy in the registration fields from the config file */ xmlnode_insert_node(m->packet->iq,xmlnode_get_firstchild(reg)); break; case JPACKET__SET: log_debug2(ZONE, LOGT_AUTH, "processing valid registration for %s",jid_full(m->packet->to)); /* save the registration data */ jutil_delay(m->packet->iq,"registered"); /* don't store password in clear text in the NS_REGISTER namespace */ xmlnode_hide(xmlnode_get_tag(m->packet->iq,"password")); xdb_set(m->si->xc, jid_user(m->packet->to), NS_REGISTER, m->packet->iq); /* if configured to, send admins a notice */ if(xmlnode_get_attrib(reg,"notify") != NULL) { char *email = xmlnode_get_tag_data(m->packet->iq, "email"); spool msg_body = spool_new(m->packet->p); spool_add(msg_body, "A new user has just been created!\n"); spool_add(msg_body, "User: "); spool_add(msg_body, jid_full(m->packet->to)); spool_add(msg_body, "\n"); spool_add(msg_body, "E-Mail: "); spool_add(msg_body, email ? email : "no address provided"); x = jutil_msgnew("chat", m->packet->to->server, "Registration Notice", spool_print(msg_body)); xmlnode_put_attrib(x, "from", m->packet->to->server); js_deliver(m->si,jpacket_new(x)); } /* if also configured, send the new user a welcome message */ if((reg = js_config(m->si, "welcome")) != NULL) { char *lang = NULL; lang = xmlnode_get_attrib(reg, "xml:lang"); x = xmlnode_new_tag("message"); xmlnode_put_attrib(x, "from", m->packet->to->server); xmlnode_put_attrib(x, "to", jid_full(m->packet->to)); if (lang != NULL) { xmlnode_put_attrib(x, "xml:lang", lang); } xmlnode_insert_node(x, xmlnode_get_firstchild(reg)); js_deliver(m->si,jpacket_new(x)); } /* clean up and respond */ jutil_iqresult(m->packet->x); break; default: return M_PASS; } return M_HANDLED;}/** * handle jabber:iq:register queries from existing users (removing accounts and changing passwords) * * This function ignores all stanzas but iq stanzas. * * This module only handles queries in the jabber:iq:register namespace for existing users. Requests are not * handled if the <register/> element does not exist in the session manager configuration. * * This handles querying for the existing registration by the user, changing the password and removing * the account. * * @param m the mapi structure * @param arg unused/ignored * @return M_IGNORE if stanza is not of type iq, M_PASS if stanza has not been handled, M_HANDLED if stanza has been handled */mreturn mod_register_server(mapi m, void *arg){ xmlnode reg, cur, check; /* pre-requisites */ if(m->packet->type != JPACKET_IQ) return M_IGNORE; if(!NSCHECK(m->packet->iq,NS_REGISTER)) return M_PASS; if(m->user == NULL) return M_PASS; if(js_config(m->si,"register") == NULL) return M_PASS; log_debug2(ZONE, LOGT_AUTH, "updating server: %s, user %s", m->user->id->server, jid_full(m->user->id)); /* check for their registration */ reg = xdb_get(m->si->xc, m->user->id, NS_REGISTER); switch(jpacket_subtype(m->packet)) { case JPACKET__GET: /* create reply to the get */ xmlnode_put_attrib(m->packet->x,"type","result"); jutil_tofrom(m->packet->x); /* copy in the registration fields from the config file */ xmlnode_insert_node(m->packet->iq,xmlnode_get_firstchild(js_config(m->si,"register")));#ifdef INCLUDE_LEGACY /* insert the key, we don't need to check it, but we'll send it :) */ xmlnode_insert_cdata(xmlnode_insert_tag(m->packet->iq,"key"),jutil_regkey(NULL,"foobar"),-1);#endif /* replace fields with already-registered ones */ for(cur = xmlnode_get_firstchild(m->packet->iq); cur != NULL; cur = xmlnode_get_nextsibling(cur)) { if(xmlnode_get_type(cur) != NTYPE_TAG) continue; check = xmlnode_get_tag(reg,xmlnode_get_name(cur)); if(check == NULL) continue; xmlnode_insert_node(cur,xmlnode_get_firstchild(check)); } /* add the registered flag */ xmlnode_insert_tag(m->packet->iq,"registered"); break; case JPACKET__SET: if(xmlnode_get_tag(m->packet->iq,"remove") != NULL) { xmlnode roster, cur; log_notice(m->user->id->server,"User Unregistered: %s",m->user->user); /* remove subscriptions */ roster = xdb_get(m->si->xc, m->user->id, NS_ROSTER); for (cur = xmlnode_get_firstchild(roster); cur!=NULL; cur=xmlnode_get_nextsibling(cur)) { int unsubscribe = 0, unsubscribed = 0; jid peer; char *subscription; jpacket jp = NULL; peer = jid_new(m->packet->p, xmlnode_get_attrib(cur, "jid")); subscription = xmlnode_get_attrib(cur, "subscription"); log_debug2(ZONE, LOGT_ROSTER, "removing subscription %s (%s)", subscription, jid_full(peer)); if (subscription == NULL) continue; /* unsubscribe for existing subscriptions */ if (j_strcmp(subscription, "to") == 0) unsubscribe = 1; else if (j_strcmp(subscription, "from") == 0) unsubscribed = 1; else if (j_strcmp(subscription, "both") == 0) unsubscribe = unsubscribed = 1; /* unsubscribe for requested subscriptions */ if (xmlnode_get_attrib(cur, "ask")) unsubscribe = 1; if (xmlnode_get_attrib(cur, "subscribe")) unsubscribed = 1; /* send the unsubscribe/unsubscribed requests */ if (unsubscribe) { xmlnode pp = jutil_presnew(JPACKET__UNSUBSCRIBE, jid_full(peer), NULL); xmlnode_put_attrib(pp, "from", jid_full(m->user->id)); jp = jpacket_new(pp); jp->flag = PACKET_FORCE_SENT_MAGIC; /* we are removing the roster, sent anyway */ js_deliver(m->si, jp); } if (unsubscribed) { xmlnode pp = jutil_presnew(JPACKET__UNSUBSCRIBED, jid_full(peer), NULL); xmlnode_put_attrib(pp, "from", jid_full(m->user->id)); jp = jpacket_new(pp); jp->flag = PACKET_FORCE_SENT_MAGIC; /* we are removing the roster, sent anyway */ js_deliver(m->si, jp); } } /* XXX BRUTE FORCE: remove the registration and auth and any misc data */ xdb_set(m->si->xc, m->user->id, NS_REGISTER, NULL); xdb_set(m->si->xc, m->user->id, NS_AUTH, NULL); xdb_set(m->si->xc, m->user->id, NS_AUTH_CRYPT, NULL); xdb_set(m->si->xc, m->user->id, NS_PRIVATE, NULL); xdb_set(m->si->xc, m->user->id, NS_ROSTER, NULL); xdb_set(m->si->xc, m->user->id, NS_VCARD, NULL); xdb_set(m->si->xc, m->user->id, NS_OFFLINE, NULL); xdb_set(m->si->xc, m->user->id, NS_FILTER, NULL); }else{ log_debug2(ZONE, LOGT_ROSTER, "updating registration for %s",jid_full(m->user->id)); /* update the registration data */ xmlnode_hide(xmlnode_get_tag(m->packet->iq,"username")); /* hide the username/password from the reg db */ xmlnode_hide(xmlnode_get_tag(m->packet->iq,"password")); jutil_delay(m->packet->iq,"updated"); xdb_set(m->si->xc, m->user->id, NS_REGISTER, m->packet->iq); } /* clean up and respond */ jutil_iqresult(m->packet->x); break; default: xmlnode_free(reg); return M_PASS; } xmlnode_free(reg); js_deliver(m->si, jpacket_reset(m->packet)); return M_HANDLED;}/** * init the module, register callbacks * * registers mod_register_new() as the callback for new user's registration requests, * registers mod_register_server() as the callback for existing user's registration requests (unregister and change password) * * @param si the session manager instance */void mod_register(jsmi si){ log_debug2(ZONE, LOGT_INIT, "init"); js_mapi_register(si, e_REGISTER, mod_register_new, NULL); js_mapi_register(si, e_SERVER, mod_register_server, NULL);}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -