spi.plg

STM32_LCD5110资料

* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
src\LCD5110.h(277): error:  #167: argument of type "unsigned int *" is incompatible with parameter of type "unsigned int"
src\LCD5110.h:                          LcdPutCnChar(x, y, (unsigned int *)*s);
src\LCD5110.h:                                             ^
src\LCD5110.h: src\main.c: 0 warnings, 1 error
Target not created
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
src\LCD5110.h(277): error:  #75: operand of "*" must be a pointer
src\LCD5110.h:                          LcdPutCnChar(x, y, *(unsigned int)s);
src\LCD5110.h:                                              ^
src\LCD5110.h: src\main.c: 0 warnings, 1 error
Target not created
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
src\LCD5110.h(291): error:  #167: argument of type "char *" is incompatible with parameter of type "const int *"
src\LCD5110.h:       LcdPutString(x,y,str_temp);   
src\LCD5110.h:                        ^
src\LCD5110.h(310): error:  #167: argument of type "char *" is incompatible with parameter of type "const int *"
src\LCD5110.h:          LcdPutString(x,y,str_temp); 
src\LCD5110.h:                           ^
src\main.c(22): error:  #167: argument of type "char *" is incompatible with parameter of type "const int *"
src\main.c:     LcdPutString(0, 0, "5110 for STM32");
src\main.c:                        ^
src\main.c(23): error:  #167: argument of type "char *" is incompatible with parameter of type "const int *"
src\main.c:     LcdPutString(0, 1, "年月");
src\main.c:                        ^
src\main.c(24): error:  #167: argument of type "char *" is incompatible with parameter of type "const int *"
src\main.c:     LcdPutString(0, 3, "1234567");
src\main.c:                        ^
src\main.c: src\main.c: 0 warnings, 5 errors
Target not created
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7534 RO-data=1590 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...