spi.plg

来自「STM32_LCD5110资料」· PLG 代码 · 共 2,119 行 · 第 1/5 页

PLG
2,119 行
字号
12345
<html>
<body>
<pre>
<h1>礦ision Build Log</h1>
<h2>Project:</h2>
E:\STM32\6.SPI\SPI.uvproj
Project File Date:  02/03/2013

<h2>Output:</h2>
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Build target 'SPI'
linking...
Program Size: Code=7302 RO-data=910 RW-data=12 ZI-data=2156  
FromELF: creating hex file...
".\obj\SPI.axf" - 0 Error(s), 0 Warning(s).
Load "E:\\STM32\\6.SPI\\obj\\SPI.AXF" 
Set JLink Project File to "E:\STM32\6.SPI\JLinkSettings.ini"
 
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Aug 24 2011 17:23:32
Hardware: V8.00
S/N : 20100214 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VB
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 2000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
src\LCD5110.h(195): error:  #20: identifier "CnPix" is undefined
src\LCD5110.h:          for(k=0; k<sizeof(CnPix)/34; k++)
src\LCD5110.h:                            ^
src\LCD5110.h(202): error:  #29: expected an expression
src\LCD5110.h:          for(unsigned char i=0; i<2; i++)
src\LCD5110.h:              ^
src\LCD5110.h(202): error:  #20: identifier "i" is undefined
src\LCD5110.h:          for(unsigned char i=0; i<2; i++)
src\LCD5110.h:                                 ^
src\LCD5110.h(205): error:  #29: expected an expression
src\LCD5110.h:                  for(unsigned char j=0; j<16; j++)
src\LCD5110.h:                      ^
src\LCD5110.h(205): error:  #20: identifier "j" is undefined
src\LCD5110.h:                  for(unsigned char j=0; j<16; j++)
src\LCD5110.h:                                         ^
src\LCD5110.h: src\main.c: 0 warnings, 5 errors
Target not created
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
src\LCD5110.h(266): error:  #29: expected an expression
src\LCD5110.h:          for(unsigned char i=0; i<2; i++)
src\LCD5110.h:              ^
src\LCD5110.h(266): error:  #20: identifier "i" is undefined
src\LCD5110.h:          for(unsigned char i=0; i<2; i++)
src\LCD5110.h:                                 ^
src\LCD5110.h(269): error:  #29: expected an expression
src\LCD5110.h:                  for(unsigned char j=0; j<16; j++)
src\LCD5110.h:                      ^
src\LCD5110.h(269): error:  #20: identifier "j" is undefined
src\LCD5110.h:                  for(unsigned char j=0; j<16; j++)
src\LCD5110.h:                                         ^
src\LCD5110.h: src\main.c: 0 warnings, 4 errors
Target not created
Build target 'SPI'
assembling cortexm3_macro.s...
assembling stm32f10x_vector.s...
compiling stm32f10x_flash.c...
compiling stm32f10x_gpio.c...
compiling stm32f10x_lib.c...
compiling stm32f10x_rcc.c...
compiling stm32f10x_spi.c...
compiling stm32f10x_it.c...
compiling main.c...
12345

spi.plg - 源码说明

本页面展示了「STM32_LCD5110资料」中的 spi.plg 源码文件，采用 PLG 编程语言编写，共 2,119 行代码。您可以在线阅读完整代码内容，也可以返回资源详情页下载完整源码包进行本地学习和开发。

虫虫开发者社区收录了大量与STM32相关的技术资源，包括源代码、技术文档、电路图等，是电子工程师和嵌入式开发者的专业学习平台。

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?