at91sam7a3.tcl

将UCOSII移植到AT91SAM7a3上

set 	AT91C_TC_BURST_NONE                 [expr 0x0 <<  4 ]
set 	AT91C_TC_BURST_XC0                  [expr 0x1 <<  4 ]
set 	AT91C_TC_BURST_XC1                  [expr 0x2 <<  4 ]
set 	AT91C_TC_BURST_XC2                  [expr 0x3 <<  4 ]
set AT91C_TC_CPCSTOP      [expr 0x1 <<  6 ]
set AT91C_TC_LDBSTOP      [expr 0x1 <<  6 ]
set AT91C_TC_CPCDIS       [expr 0x1 <<  7 ]
set AT91C_TC_LDBDIS       [expr 0x1 <<  7 ]
set AT91C_TC_ETRGEDG      [expr 0x3 <<  8 ]
set 	AT91C_TC_ETRGEDG_NONE                 [expr 0x0 <<  8 ]
set 	AT91C_TC_ETRGEDG_RISING               [expr 0x1 <<  8 ]
set 	AT91C_TC_ETRGEDG_FALLING              [expr 0x2 <<  8 ]
set 	AT91C_TC_ETRGEDG_BOTH                 [expr 0x3 <<  8 ]
set AT91C_TC_EEVTEDG      [expr 0x3 <<  8 ]
set 	AT91C_TC_EEVTEDG_NONE                 [expr 0x0 <<  8 ]
set 	AT91C_TC_EEVTEDG_RISING               [expr 0x1 <<  8 ]
set 	AT91C_TC_EEVTEDG_FALLING              [expr 0x2 <<  8 ]
set 	AT91C_TC_EEVTEDG_BOTH                 [expr 0x3 <<  8 ]
set AT91C_TC_EEVT         [expr 0x3 << 10 ]
set 	AT91C_TC_EEVT_TIOB                 [expr 0x0 << 10 ]
set 	AT91C_TC_EEVT_XC0                  [expr 0x1 << 10 ]
set 	AT91C_TC_EEVT_XC1                  [expr 0x2 << 10 ]
set 	AT91C_TC_EEVT_XC2                  [expr 0x3 << 10 ]
set AT91C_TC_ABETRG       [expr 0x1 << 10 ]
set AT91C_TC_ENETRG       [expr 0x1 << 12 ]
set AT91C_TC_WAVESEL      [expr 0x3 << 13 ]
set 	AT91C_TC_WAVESEL_UP                   [expr 0x0 << 13 ]
set 	AT91C_TC_WAVESEL_UPDOWN               [expr 0x1 << 13 ]
set 	AT91C_TC_WAVESEL_UP_AUTO              [expr 0x2 << 13 ]
set 	AT91C_TC_WAVESEL_UPDOWN_AUTO          [expr 0x3 << 13 ]
set AT91C_TC_CPCTRG       [expr 0x1 << 14 ]
set AT91C_TC_WAVE         [expr 0x1 << 15 ]
set AT91C_TC_WAVE         [expr 0x1 << 15 ]
set AT91C_TC_ACPA         [expr 0x3 << 16 ]
set 	AT91C_TC_ACPA_NONE                 [expr 0x0 << 16 ]
set 	AT91C_TC_ACPA_SET                  [expr 0x1 << 16 ]
set 	AT91C_TC_ACPA_CLEAR                [expr 0x2 << 16 ]
set 	AT91C_TC_ACPA_TOGGLE               [expr 0x3 << 16 ]
set AT91C_TC_LDRA         [expr 0x3 << 16 ]
set 	AT91C_TC_LDRA_NONE                 [expr 0x0 << 16 ]
set 	AT91C_TC_LDRA_RISING               [expr 0x1 << 16 ]
set 	AT91C_TC_LDRA_FALLING              [expr 0x2 << 16 ]
set 	AT91C_TC_LDRA_BOTH                 [expr 0x3 << 16 ]
set AT91C_TC_ACPC         [expr 0x3 << 18 ]
set 	AT91C_TC_ACPC_NONE                 [expr 0x0 << 18 ]
set 	AT91C_TC_ACPC_SET                  [expr 0x1 << 18 ]
set 	AT91C_TC_ACPC_CLEAR                [expr 0x2 << 18 ]
set 	AT91C_TC_ACPC_TOGGLE               [expr 0x3 << 18 ]
set AT91C_TC_LDRB         [expr 0x3 << 18 ]
set 	AT91C_TC_LDRB_NONE                 [expr 0x0 << 18 ]
set 	AT91C_TC_LDRB_RISING               [expr 0x1 << 18 ]
set 	AT91C_TC_LDRB_FALLING              [expr 0x2 << 18 ]
set 	AT91C_TC_LDRB_BOTH                 [expr 0x3 << 18 ]
set AT91C_TC_AEEVT        [expr 0x3 << 20 ]
set 	AT91C_TC_AEEVT_NONE                 [expr 0x0 << 20 ]
set 	AT91C_TC_AEEVT_SET                  [expr 0x1 << 20 ]
set 	AT91C_TC_AEEVT_CLEAR                [expr 0x2 << 20 ]
set 	AT91C_TC_AEEVT_TOGGLE               [expr 0x3 << 20 ]
set AT91C_TC_ASWTRG       [expr 0x3 << 22 ]
set 	AT91C_TC_ASWTRG_NONE                 [expr 0x0 << 22 ]
set 	AT91C_TC_ASWTRG_SET                  [expr 0x1 << 22 ]
set 	AT91C_TC_ASWTRG_CLEAR                [expr 0x2 << 22 ]
set 	AT91C_TC_ASWTRG_TOGGLE               [expr 0x3 << 22 ]
set AT91C_TC_BCPB         [expr 0x3 << 24 ]
set 	AT91C_TC_BCPB_NONE                 [expr 0x0 << 24 ]
set 	AT91C_TC_BCPB_SET                  [expr 0x1 << 24 ]
set 	AT91C_TC_BCPB_CLEAR                [expr 0x2 << 24 ]
set 	AT91C_TC_BCPB_TOGGLE               [expr 0x3 << 24 ]
set AT91C_TC_BCPC         [expr 0x3 << 26 ]
set 	AT91C_TC_BCPC_NONE                 [expr 0x0 << 26 ]
set 	AT91C_TC_BCPC_SET                  [expr 0x1 << 26 ]
set 	AT91C_TC_BCPC_CLEAR                [expr 0x2 << 26 ]
set 	AT91C_TC_BCPC_TOGGLE               [expr 0x3 << 26 ]
set AT91C_TC_BEEVT        [expr 0x3 << 28 ]
set 	AT91C_TC_BEEVT_NONE                 [expr 0x0 << 28 ]
set 	AT91C_TC_BEEVT_SET                  [expr 0x1 << 28 ]
set 	AT91C_TC_BEEVT_CLEAR                [expr 0x2 << 28 ]
set 	AT91C_TC_BEEVT_TOGGLE               [expr 0x3 << 28 ]
set AT91C_TC_BSWTRG       [expr 0x3 << 30 ]
set 	AT91C_TC_BSWTRG_NONE                 [expr 0x0 << 30 ]
set 	AT91C_TC_BSWTRG_SET                  [expr 0x1 << 30 ]
set 	AT91C_TC_BSWTRG_CLEAR                [expr 0x2 << 30 ]
set 	AT91C_TC_BSWTRG_TOGGLE               [expr 0x3 << 30 ]
# -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
set AT91C_TC_COVFS        [expr 0x1 <<  0 ]
set AT91C_TC_LOVRS        [expr 0x1 <<  1 ]
set AT91C_TC_CPAS         [expr 0x1 <<  2 ]
set AT91C_TC_CPBS         [expr 0x1 <<  3 ]
set AT91C_TC_CPCS         [expr 0x1 <<  4 ]
set AT91C_TC_LDRAS        [expr 0x1 <<  5 ]
set AT91C_TC_LDRBS        [expr 0x1 <<  6 ]
set AT91C_TC_ETRGS        [expr 0x1 <<  7 ]
set AT91C_TC_CLKSTA       [expr 0x1 << 16 ]
set AT91C_TC_MTIOA        [expr 0x1 << 17 ]
set AT91C_TC_MTIOB        [expr 0x1 << 18 ]
# -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
set AT91C_TC_COVFS        [expr 0x1 <<  0 ]
set AT91C_TC_LOVRS        [expr 0x1 <<  1 ]
set AT91C_TC_CPAS         [expr 0x1 <<  2 ]
set AT91C_TC_CPBS         [expr 0x1 <<  3 ]
set AT91C_TC_CPCS         [expr 0x1 <<  4 ]
set AT91C_TC_LDRAS        [expr 0x1 <<  5 ]
set AT91C_TC_LDRBS        [expr 0x1 <<  6 ]
set AT91C_TC_ETRGS        [expr 0x1 <<  7 ]
# -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
set AT91C_TC_COVFS        [expr 0x1 <<  0 ]
set AT91C_TC_LOVRS        [expr 0x1 <<  1 ]
set AT91C_TC_CPAS         [expr 0x1 <<  2 ]
set AT91C_TC_CPBS         [expr 0x1 <<  3 ]
set AT91C_TC_CPCS         [expr 0x1 <<  4 ]
set AT91C_TC_LDRAS        [expr 0x1 <<  5 ]
set AT91C_TC_LDRBS        [expr 0x1 <<  6 ]
set AT91C_TC_ETRGS        [expr 0x1 <<  7 ]
# -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 
set AT91C_TC_COVFS        [expr 0x1 <<  0 ]
set AT91C_TC_LOVRS        [expr 0x1 <<  1 ]
set AT91C_TC_CPAS         [expr 0x1 <<  2 ]
set AT91C_TC_CPBS         [expr 0x1 <<  3 ]
set AT91C_TC_CPCS         [expr 0x1 <<  4 ]
set AT91C_TC_LDRAS        [expr 0x1 <<  5 ]
set AT91C_TC_LDRBS        [expr 0x1 <<  6 ]
set AT91C_TC_ETRGS        [expr 0x1 <<  7 ]

# *****************************************************************************
#              SOFTWARE API DEFINITION  FOR Timer Counter Interface
# *****************************************************************************
# -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
set AT91C_TCB_SYNC        [expr 0x1 <<  0 ]
# -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
set AT91C_TCB_TC0XC0S     [expr 0x3 <<  0 ]
set 	AT91C_TCB_TC0XC0S_TCLK0                0x0
set 	AT91C_TCB_TC0XC0S_NONE                 0x1
set 	AT91C_TCB_TC0XC0S_TIOA1                0x2
set 	AT91C_TCB_TC0XC0S_TIOA2                0x3
set AT91C_TCB_TC1XC1S     [expr 0x3 <<  2 ]
set 	AT91C_TCB_TC1XC1S_TCLK1                [expr 0x0 <<  2 ]
set 	AT91C_TCB_TC1XC1S_NONE                 [expr 0x1 <<  2 ]
set 	AT91C_TCB_TC1XC1S_TIOA0                [expr 0x2 <<  2 ]
set 	AT91C_TCB_TC1XC1S_TIOA2                [expr 0x3 <<  2 ]
set AT91C_TCB_TC2XC2S     [expr 0x3 <<  4 ]
set 	AT91C_TCB_TC2XC2S_TCLK2                [expr 0x0 <<  4 ]
set 	AT91C_TCB_TC2XC2S_NONE                 [expr 0x1 <<  4 ]
set 	AT91C_TCB_TC2XC2S_TIOA0                [expr 0x2 <<  4 ]
set 	AT91C_TCB_TC2XC2S_TIOA1                [expr 0x3 <<  4 ]

# *****************************************************************************
#              SOFTWARE API DEFINITION  FOR Multimedia Card Interface
# *****************************************************************************
# -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- 
set AT91C_MCI_MCIEN       [expr 0x1 <<  0 ]
set AT91C_MCI_MCIDIS      [expr 0x1 <<  1 ]
set AT91C_MCI_PWSEN       [expr 0x1 <<  2 ]
set AT91C_MCI_PWSDIS      [expr 0x1 <<  3 ]
set AT91C_MCI_SWRST       [expr 0x1 <<  7 ]
# -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- 
set AT91C_MCI_CLKDIV      [expr 0xFF <<  0 ]
set AT91C_MCI_PWSDIV      [expr 0x7 <<  8 ]
set AT91C_MCI_PDCPADV     [expr 0x1 << 14 ]
set AT91C_MCI_PDCMODE     [expr 0x1 << 15 ]
set AT91C_MCI_BLKLEN      [expr 0xFFF << 18 ]
# -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- 
set AT91C_MCI_DTOCYC      [expr 0xF <<  0 ]
set AT91C_MCI_DTOMUL      [expr 0x7 <<  4 ]
set 	AT91C_MCI_DTOMUL_1                    [expr 0x0 <<  4 ]
set 	AT91C_MCI_DTOMUL_16                   [expr 0x1 <<  4 ]
set 	AT91C_MCI_DTOMUL_128                  [expr 0x2 <<  4 ]
set 	AT91C_MCI_DTOMUL_256                  [expr 0x3 <<  4 ]
set 	AT91C_MCI_DTOMUL_1024                 [expr 0x4 <<  4 ]
set 	AT91C_MCI_DTOMUL_4096                 [expr 0x5 <<  4 ]
set 	AT91C_MCI_DTOMUL_65536                [expr 0x6 <<  4 ]
set 	AT91C_MCI_DTOMUL_1048576              [expr 0x7 <<  4 ]
# -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- 
set AT91C_MCI_SCDSEL      [expr 0xF <<  0 ]
set AT91C_MCI_SCDBUS      [expr 0x1 <<  7 ]
# -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- 
set AT91C_MCI_CMDNB       [expr 0x3F <<  0 ]
set AT91C_MCI_RSPTYP      [expr 0x3 <<  6 ]
set 	AT91C_MCI_RSPTYP_NO                   [expr 0x0 <<  6 ]
set 	AT91C_MCI_RSPTYP_48                   [expr 0x1 <<  6 ]
set 	AT91C_MCI_RSPTYP_136                  [expr 0x2 <<  6 ]
set AT91C_MCI_SPCMD       [expr 0x7 <<  8 ]
set 	AT91C_MCI_SPCMD_NONE                 [expr 0x0 <<  8 ]
set 	AT91C_MCI_SPCMD_INIT                 [expr 0x1 <<  8 ]
set 	AT91C_MCI_SPCMD_SYNC                 [expr 0x2 <<  8 ]
set 	AT91C_MCI_SPCMD_IT_CMD               [expr 0x4 <<  8 ]
set 	AT91C_MCI_SPCMD_IT_REP               [expr 0x5 <<  8 ]
set AT91C_MCI_OPDCMD      [expr 0x1 << 11 ]
set AT91C_MCI_MAXLAT      [expr 0x1 << 12 ]
set AT91C_MCI_TRCMD       [expr 0x3 << 16 ]
set 	AT91C_MCI_TRCMD_NO                   [expr 0x0 << 16 ]
set 	AT91C_MCI_TRCMD_START                [expr 0x1 << 16 ]
set 	AT91C_MCI_TRCMD_STOP                 [expr 0x2 << 16 ]
set AT91C_MCI_TRDIR       [expr 0x1 << 18 ]
set AT91C_MCI_TRTYP       [expr 0x3 << 19 ]
set 	AT91C_MCI_TRTYP_BLOCK                [expr 0x0 << 19 ]
set 	AT91C_MCI_TRTYP_MULTIPLE             [expr 0x1 << 19 ]
set 	AT91C_MCI_TRTYP_STREAM               [expr 0x2 << 19 ]
# -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- 
set AT91C_MCI_CMDRDY      [expr 0x1 <<  0 ]
set AT91C_MCI_RXRDY       [expr 0x1 <<  1 ]
set AT91C_MCI_TXRDY       [expr 0x1 <<  2 ]
set AT91C_MCI_BLKE        [expr 0x1 <<  3 ]
set AT91C_MCI_DTIP        [expr 0x1 <<  4 ]
set AT91C_MCI_NOTBUSY     [expr 0x1 <<  5 ]
set AT91C_MCI_ENDRX       [expr 0x1 <<  6 ]
set AT91C_MCI_ENDTX       [expr 0x1 <<  7 ]
set AT91C_MCI_RXBUFF      [expr 0x1 << 14 ]
set AT91C_MCI_TXBUFE      [expr 0x1 << 15 ]
set AT91C_MCI_RINDE       [expr 0x1 << 16 ]
set AT91C_MCI_RDIRE       [expr 0x1 << 17 ]
set AT91C_MCI_RCRCE       [expr 0x1 << 18 ]
set AT91C_MCI_RENDE       [expr 0x1 << 19 ]
set AT91C_MCI_RTOE        [expr 0x1 << 20 ]
set AT91C_MCI_DCRCE       [expr 0x1 << 21 ]
set AT91C_MCI_DTOE        [expr 0x1 << 22 ]
set AT91C_MCI_OVRE        [expr 0x1 << 30 ]
set AT91C_MCI_UNRE        [expr 0x1 << 31 ]
# -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- 
set AT91C_MCI_CMDRDY      [expr 0x1 <<  0 ]
set AT91C_MCI_RXRDY       [expr 0x1 <<  1 ]
set AT91C_MCI_TXRDY       [expr 0x1 <<  2 ]
set AT91C_MCI_BLKE        [expr 0x1 <<  3 ]
set AT91C_MCI_DTIP        [expr 0x1 <<  4 ]
set AT91C_MCI_NOTBUSY     [expr 0x1 <<  5 ]
set AT91C_MCI_ENDRX       [expr 0x1 <<  6 ]
set AT91C_MCI_ENDTX       [expr 0x1 <<  7 ]
set AT91C_MCI_RXBUFF      [expr 0x1 << 14 ]
set AT91C_MCI_TXBUFE      [expr 0x1 << 15 ]
set AT91C_MCI_RINDE       [expr 0x1 << 16 ]
set AT91C_MCI_RDIRE       [expr 0x1 << 17 ]
set AT91C_MCI_RCRCE       [expr 0x1 << 18 ]
set AT91C_MCI_RENDE       [expr 0x1 << 19 ]
set AT91C_MCI_RTOE        [expr 0x1 << 20 ]
set AT91C_MCI_DCRCE       [expr 0x1 << 21 ]
set AT91C_MCI_DTOE        [expr 0x1 << 22 ]
set AT91C_MCI_OVRE        [expr 0x1 << 30 ]
set AT91C_MCI_UNRE        [expr 0x1 << 31 ]
# -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- 
set AT91C_MCI_CMDRDY      [expr 0x1 <<  0 ]
set AT91C_MCI_RXRDY       [expr 0x1 <<  1 ]
set AT91C_MCI_TXRDY       [expr 0x1 <<  2 ]
set AT91C_MCI_BLKE        [expr 0x1 <<  3 ]
set AT91C_MCI_DTIP        [expr 0x1 <<  4 ]
set AT91C_MCI_NOTBUSY     [expr 0x1 <<  5 ]
set AT91C_MCI_ENDRX       [expr 0x1 <<  6 ]
set AT91C_MCI_ENDTX       [expr 0x1 <<  7 ]
set AT91C_MCI_RXBUFF      [expr 0x1 << 14 ]
set AT91C_MCI_TXBUFE      [expr 0x1 << 15 ]
set AT91C_MCI_RINDE       [expr 0x1 << 16 ]
set AT91C_MCI_RDIRE       [expr 0x1 << 17 ]