sc2410_usb_ser.c

三星公司2410的usb驱动程序

/*+
THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE.
Copyright (c) 2001. Samsung Electronics, co. ltd  All rights reserved.

Module Name:  

Abstract:

	S3C2410 USB function(ACTIVE SYNC) device driver (Wrapper layer)

rev:
	2003.3.19	: updated for USB-DMA (purnnamu)
	2002.5.7	: Add to s3c2410_code (Seung-han, Lim)
	2002.1.22	: First release/no error recovery (kwangyoon LEE, [e-mail])

Notes: 
*/
/* MiTAC Int'l Corp. 2002     

$release notes
Modifier         sign                 date                   Description
================================================================================
Jocky	jocky0308		03/08/2006 		   Do not set too many events.
Ed Yeh      edyeh1108            11/8/2005              Add AC-in event.
Jonathan    Jonathan01_0915      09/15/2005             Modify S2440 USB Driver to PNA500 


*/

#include <windows.h>
#include <types.h>
#include <ceddk.h>
#include <memory.h>
#include <notify.h>
#include <serhw.h>
#include "S2410.h"
#include <SC2410_usb_hw.h>
#include <SC2410_usb_ser.h>
#include <nkintr.h>
#include <oalintr.h>
#include <devload.h>
#include <windev.h>
#undef ZONE_INIT
#include <serdbg.h>
#include <celog.h> 
#include <drv_glob.h> //:-)
#include "drvlib.h" //Jonathan01_0915



extern VOID SerialEventHandler(PVOID pHead);

extern void msWait(unsigned msVal);

extern volatile USBD_GLOBALS *usbdShMem;	//:-)
//Jonathan01_0915 start
volatile PDRIVER_GLOBALS  pDriverGlobals = NULL;
volatile IOPreg           *s2410IOP      = NULL;       
volatile CLKPWRreg        *s2410CLKPW    = NULL;    
//Jonathan01_0915 end

static HANDLE hUSBAcInIntr = NULL; //edyeh1108


__inline static VOID
SignalRemoval( PSER_INFO pHWHead )
{
	pHWHead->ModemStatus &= ~MS_RLSD_ON;
	EvaluateEventFlag(pHWHead->pMddHead, EV_RLSD);
}


static
DWORD WINAPI SerEventThread(PSER_INFO pHWHead)
{
	ULONG WaitReturn;
	static HWND fgp=NULL, prev_fgp	= NULL; 	
	static HWND dialog_hwnd			= NULL;
	static ULONG firstplug			= 0, toretry = 0;
	static PROCESS_INFORMATION pi_usbcnect, pi_repllog;
	
	DEBUGMSG(1, (TEXT("++SerEventThread\r\n")));
	DEBUGMSG(1, (TEXT("Spinning in dispatch thread %X\n\r"), pHWHead));
	
	while (!pHWHead->pDispatchThread)
		Sleep(20);

	while (!pHWHead->KillRxThread) {
		DEBUGMSG (1, (TEXT("Event %X, Index %d, Int %d\r\n"), 
				pHWHead->hSerialEvent,
				pHWHead->dwDevIndex,
				pHWHead->pHWObj->dwIntID ));

	// Ugly.  We don't get an interrupt when we are unplugged from the
	// bus, but we'd like to know when that happens.  So we use a timeout
	// on our interrupt wait.  This effectively allows me to poll the SOF
	// status, and if SOFs stop arriving, I'll assume we have been
	// disconnected from the bus.  Wait is last, allowing us to essentially
	// spoof one interrupt right at startup.

	// Only poll if we are opened and active.  Otherwise no one cares

#ifdef POLL_FOR_DISCONNECT
		if (pHWHead->cOpenCount && pHWHead->dConfIdx)
		{
			// DEBUGMSG(1, (TEXT("waitforsingleobject in up\r\n")));
      
			WaitReturn = WaitForSingleObject(pHWHead->hSerialEvent, SC2410_USB_POLL_RATE);
			// DEBUGMSG(1, (TEXT("waitforsingleobject in\r\n")));
		}
		else
#endif        
		{
		  	//DEBUGMSG(1, (TEXT("waitforsingleobject out up\r\n"))); 
	      	WaitReturn = WaitForSingleObject(pHWHead->hSerialEvent, INFINITE);

/*
	      	DEBUGMSG(1, (TEXT("waitforsingleobject out\r\n")));  
	
		  	if (WaitReturn == WAIT_ABANDONED)
		  	{
				DEBUGMSG(1, (TEXT("WAIT_ABANDONED\r\n")));
			}
	
			if (WaitReturn == WAIT_OBJECT_0)
			{
				DEBUGMSG(1, (TEXT("WAIT_OBJECT_0\r\n")));
			}
	
			if (WaitReturn == WAIT_TIMEOUT)
			{
				DEBUGMSG(1, (TEXT("WAIT_TIMEOUT\r\n")));
			}
	
			if (WaitReturn == WAIT_FAILED)
			{
				DEBUGMSG(1, (TEXT("WAIT_FAILED\r\n")));
			}
*/
		}
	
		SerialEventHandler(pHWHead->pMddHead);
		InterruptDone(pHWHead->pHWObj->dwIntID);
	}
	
	DEBUGMSG (1, (TEXT("--SerEventThread %x exiting\r\n"), pHWHead));

	return (0);
}

static
BOOL StartEventThread(PSER_INFO pHWHead)
{
    
	// Initialize the interrupt to be associated with the hSerialEvent
	// event. If this call fails, then another process has registered 
	// for the interrupt, so fail the init and set the hSerialEvent to NULL.
	DEBUGMSG(1, (TEXT("Initializing interrupt 0x%X, 0x%X\n\r"),
			pHWHead->pHWObj->dwIntID, pHWHead->hSerialEvent));

	if (!InterruptInitialize(pHWHead->pHWObj->dwIntID, pHWHead->hSerialEvent, 0, 0)) 
	{

		DEBUGMSG(1, (TEXT("Error initializing interrupt\n\r")));

		return (FALSE);
	}

	InterruptDone(pHWHead->pHWObj->dwIntID);
    
	// Now set up the dispatch thread 
	pHWHead->KillRxThread = 0;

	DEBUGMSG(1, (TEXT("Spinning thread%X\n\r"), pHWHead));

	pHWHead->pDispatchThread = CreateThread(NULL,0, SerEventThread,
							pHWHead, 0,NULL);
	if (pHWHead->pDispatchThread == NULL) 
	{
		DEBUGMSG(1, (TEXT("Error creating Event thread (%d)\n\r"), GetLastError()));
		return (FALSE);
	}

	DEBUGMSG (1, (TEXT("Created Event thread %X\r\n"), pHWHead->pDispatchThread));
	DEBUGMSG (1, (TEXT("About to set priority\r\n")));

	CeSetThreadPriority(pHWHead->pDispatchThread, DEFAULT_THREAD_PRIO);
                          
	DEBUGMSG (1, (TEXT("Back from setting priority\r\n")));

	return (TRUE);
}

/***************************************************************
 @doc OEM
 @func VOID | SerSetBaudRate |
 * This routine sets the baud rate of the device.
 *  Not exported to users, only to driver.
 *
 @rdesc None.
 ****************************************************************/
static
BOOL SerSetBaudRate( PVOID pHead,	// @parm PVOID returned by SerInit
		     ULONG BaudRate )	// @parm ULONG representing decimal baud rate.
{
	PSER_INFO   pHWHead = (PSER_INFO)pHead;

	DEBUGMSG(1, (TEXT("SerSetBaudRate\r\n")));

	// Baudrate is meaningless.  Just be agreeable and say we did it.
	return (TRUE);    
}

/****************************************************************
	@doc INTERNAL

	@func VOID | SerUSB_InternalMapRegisterAddresses |
		This routine maps the ASIC registers. 
		It's an artifact of this
		implementation.

	@rdesc None.
****************************************************************/
static
void SerUSBInternalMapRegisterAddresses( PSER_INFO   pHWHead )
{
	PUCHAR  pVMem;
	BOOL    bMapReturn;
	ULONG   err			= 0;
  
	DEBUGMSG(1, (TEXT("++SerUSBInternalMapRegisterAddresses\r\n")));

	// Map CSR registers.
	pVMem = (PUCHAR)VirtualAlloc(0, PAGE_SIZE*2, MEM_RESERVE, PAGE_NOACCESS);
	
	if (pVMem) 
	{
		DEBUGMSG(1, (TEXT("VirtualAlloc Succeeded\r\n")));

		bMapReturn = VirtualCopy( pVMem,
					  (LPVOID)pHWHead->dwIOBase,
					  PAGE_SIZE,
					  PAGE_READWRITE | PAGE_NOCACHE );
		if (!bMapReturn) 
		{
			err = GetLastError();
			DEBUGMSG(1, (TEXT("Virtual Copy: Serial SPACE FAILED\r\n")));
		}

		pVMem = (BYTE *)pVMem;
		pHWHead->pUSBCtrlAddr=(volatile struct udcreg *)((BYTE *)pVMem + 0x140); // offset

		bMapReturn = VirtualCopy( pVMem+PAGE_SIZE,
					  (LPVOID)IOP_BASE,
					  PAGE_SIZE,
					  PAGE_READWRITE | PAGE_NOCACHE );
		if (!bMapReturn) 
		{
			err = GetLastError();
			DEBUGMSG(1, (TEXT("Virtual Copy: IOP SPACE FAILED\r\n")));
		}

		pHWHead->pIrqCtrlAddr=(volatile IOPreg *)(pVMem+PAGE_SIZE);

		bMapReturn = VirtualCopy( pVMem+PAGE_SIZE,
					  (LPVOID)CLKPWR_BASE,
					  PAGE_SIZE,
					  PAGE_READWRITE | PAGE_NOCACHE );
		if (!bMapReturn) 
		{
			err = GetLastError();
			DEBUGMSG(1, (TEXT("Virtual Copy: CLKPWR SPACE FAILED\r\n")));
		}

		pHWHead->pCLKPWR = (volatile CLKPWRreg *)(pVMem+PAGE_SIZE);
		
	} else {
    		DEBUGMSG(1, (TEXT("Virtual Alloc: FAILED\r\n")));
	}
  
		DEBUGMSG(1, (TEXT("VirtualCopy Succeeded, pVMem:%x\r\n"), pVMem));

		DEBUGMSG(1, (TEXT("--SerUSBInternalMapRegisterAddresses\r\n")));
}

static
BOOL SerSetIRBaudRate( PSER_INFO pHWHead, ULONG baud )	// @parm baud rate - ignored
{
	DEBUGMSG(1, (TEXT("Serial set IR Baud %d\r\n"), baud));

	// We don't support IR
	return (FALSE);
}



/*******************************************************************************
Routine:

    Ser_GetRegistryData

Description:

    Take the registry path provided to COM_Init and use it to find this 
    requested comm port's DeviceArrayIndex, the IOPort Base Address, and the
    Interrupt number.
   
Arguments:

    LPCTSTR regKeyPath	the registry path passed in to COM_Init.

Return Value:

    -1 if there is an error.

******************************************************************************/

static
BOOL Ser_GetRegistryData(PSER_INFO pHWHead,	LPCTSTR regKeyPath)
{
#define GCI_BUFFER_SIZE 256   

	LONG    regError;
	HKEY    hKey;
	TCHAR   devKeyPath[GCI_BUFFER_SIZE];
	DWORD   dwDataSize = GCI_BUFFER_SIZE;

	DEBUGMSG(1,
			(TEXT("Ser_GetRegistryData Try to open %s\r\n"),regKeyPath));

  // We've been handed the name of a key in the registry that was generated
  // on the fly by device.exe.  We're going to open that key and pull from it
  // a value that is the name of this serial port's real key.  That key
  // will have the DeviceArrayIndex that we're trying to find.  

	regError = RegOpenKeyEx(HKEY_LOCAL_MACHINE, 
				regKeyPath,
				0, 
				KEY_ALL_ACCESS, 
				&hKey);

	if (regError != ERROR_SUCCESS) 
	{
		DEBUGMSG(1,(TEXT("Failed to open %s, Error 0x%X\r\n"),regKeyPath,regError));
		return (FALSE);                
	}

	regError = RegQueryValueEx( hKey, 
				    DEVLOAD_DEVKEY_VALNAME,
				    NULL, 
				    NULL, 
				    (LPBYTE)devKeyPath,
				    &dwDataSize);

	// We're done with that registry key, so close it.
	RegCloseKey (hKey);

	if (regError != ERROR_SUCCESS) 
	{
		DEBUGMSG(1, (TEXT("Failed to find data at %s\\%s, Error 0x%X\r\n"), 
				regKeyPath, DEVLOAD_DEVKEY_VALNAME, regError));
		return (FALSE);                
	}

	DEBUGMSG(1, (TEXT("Try to open %s\r\n"), devKeyPath));

	regError = RegOpenKeyEx(HKEY_LOCAL_MACHINE, 
				devKeyPath, 
				0,
				KEY_ALL_ACCESS, 
				&hKey);

	if (regError != ERROR_SUCCESS) 
	{
		DEBUGMSG(1,(TEXT("Failed to open %s, Error 0x%X\r\n"), devKeyPath, regError));
		return (FALSE);        
	}

	// Okay, we're finally ready to try and load our registry data.
	dwDataSize = SC2410USB_REG_DEVINDEX_VAL_LEN;

	regError   = RegQueryValueEx(hKey, 
				     SC2410USB_REG_DEVINDEX_VAL_NAME, 
				     NULL, 
				     NULL,
				     (LPBYTE)(&pHWHead->dwDevIndex), 
				     &dwDataSize);

	if (regError == ERROR_SUCCESS) 
	{
		dwDataSize = SC2410USB_REG_IRQ_VAL_LEN;

		regError = RegQueryValueEx( hKey, 
					    SC2410USB_REG_IRQ_VAL_NAME, 
					    NULL, 
					    NULL,
					    (LPBYTE)(&pHWHead->dwIRQ), 
					    &dwDataSize );
	}

	if (regError == ERROR_SUCCESS) 
	{
		dwDataSize = SC2410USB_REG_IOBASE_VAL_LEN;

		regError = RegQueryValueEx( hKey, 
					    SC2410USB_REG_IOBASE_VAL_NAME, 
					    NULL, 
					    NULL,
					    (LPBYTE)(&pHWHead->dwIOBase), 
					    &dwDataSize);
	}

	if (regError == ERROR_SUCCESS) 
	{
		dwDataSize = SC2410USB_REG_IOLEN_VAL_LEN;

		regError = RegQueryValueEx( hKey, 
					    SC2410USB_REG_IOLEN_VAL_NAME, 
					    NULL,