at91sam9260.inc

ATMEL AT91SAM9260的中段控制程序！

AIC_ISCR        #  4 ;- Interrupt Set Command Register
AIC_EOICR       #  4 ;- End of Interrupt Command Register
AIC_SPU         #  4 ;- Spurious Vector Register
AIC_DCR         #  4 ;- Debug Control Register (Protect)
                #  4 ;- Reserved
AIC_FFER        #  4 ;- Fast Forcing Enable Register
AIC_FFDR        #  4 ;- Fast Forcing Disable Register
AIC_FFSR        #  4 ;- Fast Forcing Status Register
;- -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- 
AT91C_AIC_PRIOR           EQU (0x7:SHL:0) ;- (AIC) Priority Level
AT91C_AIC_PRIOR_LOWEST    EQU (0x0) ;- (AIC) Lowest priority level
AT91C_AIC_PRIOR_HIGHEST   EQU (0x7) ;- (AIC) Highest priority level
AT91C_AIC_SRCTYPE         EQU (0x3:SHL:5) ;- (AIC) Interrupt Source Type
AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE EQU (0x0:SHL:5) ;- (AIC) Internal Sources Code Label Level Sensitive
AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED EQU (0x1:SHL:5) ;- (AIC) Internal Sources Code Label Edge triggered
AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL EQU (0x2:SHL:5) ;- (AIC) External Sources Code Label High-level Sensitive
AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE EQU (0x3:SHL:5) ;- (AIC) External Sources Code Label Positive Edge triggered
;- -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- 
AT91C_AIC_NFIQ            EQU (0x1:SHL:0) ;- (AIC) NFIQ Status
AT91C_AIC_NIRQ            EQU (0x1:SHL:1) ;- (AIC) NIRQ Status
;- -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- 
AT91C_AIC_DCR_PROT        EQU (0x1:SHL:0) ;- (AIC) Protection Mode
AT91C_AIC_DCR_GMSK        EQU (0x1:SHL:1) ;- (AIC) General Mask

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
;- *****************************************************************************
                ^ 0 ;- AT91S_PIO
PIO_PER         #  4 ;- PIO Enable Register
PIO_PDR         #  4 ;- PIO Disable Register
PIO_PSR         #  4 ;- PIO Status Register
                #  4 ;- Reserved
PIO_OER         #  4 ;- Output Enable Register
PIO_ODR         #  4 ;- Output Disable Registerr
PIO_OSR         #  4 ;- Output Status Register
                #  4 ;- Reserved
PIO_IFER        #  4 ;- Input Filter Enable Register
PIO_IFDR        #  4 ;- Input Filter Disable Register
PIO_IFSR        #  4 ;- Input Filter Status Register
                #  4 ;- Reserved
PIO_SODR        #  4 ;- Set Output Data Register
PIO_CODR        #  4 ;- Clear Output Data Register
PIO_ODSR        #  4 ;- Output Data Status Register
PIO_PDSR        #  4 ;- Pin Data Status Register
PIO_IER         #  4 ;- Interrupt Enable Register
PIO_IDR         #  4 ;- Interrupt Disable Register
PIO_IMR         #  4 ;- Interrupt Mask Register
PIO_ISR         #  4 ;- Interrupt Status Register
PIO_MDER        #  4 ;- Multi-driver Enable Register
PIO_MDDR        #  4 ;- Multi-driver Disable Register
PIO_MDSR        #  4 ;- Multi-driver Status Register
                #  4 ;- Reserved
PIO_PPUDR       #  4 ;- Pull-up Disable Register
PIO_PPUER       #  4 ;- Pull-up Enable Register
PIO_PPUSR       #  4 ;- Pull-up Status Register
                #  4 ;- Reserved
PIO_ASR         #  4 ;- Select A Register
PIO_BSR         #  4 ;- Select B Register
PIO_ABSR        #  4 ;- AB Select Status Register
                # 36 ;- Reserved
PIO_OWER        #  4 ;- Output Write Enable Register
PIO_OWDR        #  4 ;- Output Write Disable Register
PIO_OWSR        #  4 ;- Output Write Status Register

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Clock Generator Controler
;- *****************************************************************************
                ^ 0 ;- AT91S_CKGR
CKGR_MOR        #  4 ;- Main Oscillator Register
CKGR_MCFR       #  4 ;- Main Clock  Frequency Register
CKGR_PLLAR      #  4 ;- PLL A Register
CKGR_PLLBR      #  4 ;- PLL B Register
;- -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- 
AT91C_CKGR_MOSCEN         EQU (0x1:SHL:0) ;- (CKGR) Main Oscillator Enable
AT91C_CKGR_OSCBYPASS      EQU (0x1:SHL:1) ;- (CKGR) Main Oscillator Bypass
AT91C_CKGR_OSCOUNT        EQU (0xFF:SHL:8) ;- (CKGR) Main Oscillator Start-up Time
;- -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- 
AT91C_CKGR_MAINF          EQU (0xFFFF:SHL:0) ;- (CKGR) Main Clock Frequency
AT91C_CKGR_MAINRDY        EQU (0x1:SHL:16) ;- (CKGR) Main Clock Ready
;- -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- 
AT91C_CKGR_DIVA           EQU (0xFF:SHL:0) ;- (CKGR) Divider A Selected
AT91C_CKGR_DIVA_0         EQU (0x0) ;- (CKGR) Divider A output is 0
AT91C_CKGR_DIVA_BYPASS    EQU (0x1) ;- (CKGR) Divider A is bypassed
AT91C_CKGR_PLLACOUNT      EQU (0x3F:SHL:8) ;- (CKGR) PLL A Counter
AT91C_CKGR_OUTA           EQU (0x3:SHL:14) ;- (CKGR) PLL A Output Frequency Range
AT91C_CKGR_OUTA_0         EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
AT91C_CKGR_OUTA_1         EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
AT91C_CKGR_OUTA_2         EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
AT91C_CKGR_OUTA_3         EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet
AT91C_CKGR_MULA           EQU (0x7FF:SHL:16) ;- (CKGR) PLL A Multiplier
AT91C_CKGR_SRCA           EQU (0x1:SHL:29) ;- (CKGR) 
;- -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- 
AT91C_CKGR_DIVB           EQU (0xFF:SHL:0) ;- (CKGR) Divider B Selected
AT91C_CKGR_DIVB_0         EQU (0x0) ;- (CKGR) Divider B output is 0
AT91C_CKGR_DIVB_BYPASS    EQU (0x1) ;- (CKGR) Divider B is bypassed
AT91C_CKGR_PLLBCOUNT      EQU (0x3F:SHL:8) ;- (CKGR) PLL B Counter
AT91C_CKGR_OUTB           EQU (0x3:SHL:14) ;- (CKGR) PLL B Output Frequency Range
AT91C_CKGR_OUTB_0         EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
AT91C_CKGR_OUTB_1         EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
AT91C_CKGR_OUTB_2         EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
AT91C_CKGR_OUTB_3         EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet
AT91C_CKGR_MULB           EQU (0x7FF:SHL:16) ;- (CKGR) PLL B Multiplier
AT91C_CKGR_USBDIV         EQU (0x3:SHL:28) ;- (CKGR) Divider for USB Clocks
AT91C_CKGR_USBDIV_0       EQU (0x0:SHL:28) ;- (CKGR) Divider output is PLL clock output
AT91C_CKGR_USBDIV_1       EQU (0x1:SHL:28) ;- (CKGR) Divider output is PLL clock output divided by 2
AT91C_CKGR_USBDIV_2       EQU (0x2:SHL:28) ;- (CKGR) Divider output is PLL clock output divided by 4

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Power Management Controler
;- *****************************************************************************
                ^ 0 ;- AT91S_PMC
PMC_SCER        #  4 ;- System Clock Enable Register
PMC_SCDR        #  4 ;- System Clock Disable Register
PMC_SCSR        #  4 ;- System Clock Status Register
                #  4 ;- Reserved
PMC_PCER        #  4 ;- Peripheral Clock Enable Register
PMC_PCDR        #  4 ;- Peripheral Clock Disable Register
PMC_PCSR        #  4 ;- Peripheral Clock Status Register
                #  4 ;- Reserved
PMC_MOR         #  4 ;- Main Oscillator Register
PMC_MCFR        #  4 ;- Main Clock  Frequency Register
PMC_PLLAR       #  4 ;- PLL A Register
PMC_PLLBR       #  4 ;- PLL B Register
PMC_MCKR        #  4 ;- Master Clock Register
                # 12 ;- Reserved
PMC_PCKR        # 32 ;- Programmable Clock Register
PMC_IER         #  4 ;- Interrupt Enable Register
PMC_IDR         #  4 ;- Interrupt Disable Register
PMC_SR          #  4 ;- Status Register
PMC_IMR         #  4 ;- Interrupt Mask Register
;- -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- 
AT91C_PMC_PCK             EQU (0x1:SHL:0) ;- (PMC) Processor Clock
AT91C_PMC_UHP             EQU (0x1:SHL:6) ;- (PMC) USB Host Port Clock
AT91C_PMC_UDP             EQU (0x1:SHL:7) ;- (PMC) USB Device Port Clock
AT91C_PMC_PCK0            EQU (0x1:SHL:8) ;- (PMC) Programmable Clock Output
AT91C_PMC_PCK1            EQU (0x1:SHL:9) ;- (PMC) Programmable Clock Output
AT91C_PMC_HCK0            EQU (0x1:SHL:16) ;- (PMC) AHB UHP Clock Output
AT91C_PMC_HCK1            EQU (0x1:SHL:17) ;- (PMC) AHB LCDC Clock Output
;- -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- 
;- -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- 
;- -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register -------- 
;- -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register -------- 
;- -------- CKGR_PLLAR : (PMC Offset: 0x28) PLL A Register -------- 
;- -------- CKGR_PLLBR : (PMC Offset: 0x2c) PLL B Register -------- 
;- -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- 
AT91C_PMC_CSS             EQU (0x3:SHL:0) ;- (PMC) Programmable Clock Selection
AT91C_PMC_CSS_SLOW_CLK    EQU (0x0) ;- (PMC) Slow Clock is selected
AT91C_PMC_CSS_MAIN_CLK    EQU (0x1) ;- (PMC) Main Clock is selected
AT91C_PMC_CSS_PLLA_CLK    EQU (0x2) ;- (PMC) Clock from PLL A is selected
AT91C_PMC_CSS_PLLB_CLK    EQU (0x3) ;- (PMC) Clock from PLL B is selected
AT91C_PMC_PRES            EQU (0x7:SHL:2) ;- (PMC) Programmable Clock Prescaler
AT91C_PMC_PRES_CLK        EQU (0x0:SHL:2) ;- (PMC) Selected clock
AT91C_PMC_PRES_CLK_2      EQU (0x1:SHL:2) ;- (PMC) Selected clock divided by 2
AT91C_PMC_PRES_CLK_4      EQU (0x2:SHL:2) ;- (PMC) Selected clock divided by 4
AT91C_PMC_PRES_CLK_8      EQU (0x3:SHL:2) ;- (PMC) Selected clock divided by 8
AT91C_PMC_PRES_CLK_16     EQU (0x4:SHL:2) ;- (PMC) Selected clock divided by 16
AT91C_PMC_PRES_CLK_32     EQU (0x5:SHL:2) ;- (PMC) Selected clock divided by 32
AT91C_PMC_PRES_CLK_64     EQU (0x6:SHL:2) ;- (PMC) Selected clock divided by 64
AT91C_PMC_MDIV            EQU (0x3:SHL:8) ;- (PMC) Master Clock Division
AT91C_PMC_MDIV_1          EQU (0x0:SHL:8) ;- (PMC) The master clock and the processor clock are the same
AT91C_PMC_MDIV_2          EQU (0x1:SHL:8) ;- (PMC) The processor clock is twice as fast as the master clock
AT91C_PMC_MDIV_3          EQU (0x2:SHL:8) ;- (PMC) The processor clock is four times faster than the master clock
;- -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- 
;- -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- 
AT91C_PMC_MOSCS           EQU (0x1:SHL:0) ;- (PMC) MOSC Status/Enable/Disable/Mask
AT91C_PMC_LOCKA           EQU (0x1:SHL:1) ;- (PMC) PLL A Status/Enable/Disable/Mask
AT91C_PMC_LOCKB           EQU (0x1:SHL:2) ;- (PMC) PLL B Status/Enable/Disable/Mask
AT91C_PMC_MCKRDY          EQU (0x1:SHL:3) ;- (PMC) Master Clock Status/Enable/Disable/Mask
AT91C_PMC_PCK0RDY         EQU (0x1:SHL:8) ;- (PMC) PCK0_RDY Status/Enable/Disable/Mask
AT91C_PMC_PCK1RDY         EQU (0x1:SHL:9) ;- (PMC) PCK1_RDY Status/Enable/Disable/Mask
;- -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- 
;- -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- 
;- -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- 

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Reset Controller Interface
;- *****************************************************************************
                ^ 0 ;- AT91S_RSTC
RSTC_RCR        #  4 ;- Reset Control Register
RSTC_RSR        #  4 ;- Reset Status Register
RSTC_RMR        #  4 ;- Reset Mode Register
;- -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register -------- 
AT91C_RSTC_PROCRST        EQU (0x1:SHL:0) ;- (RSTC) Processor Reset
AT91C_RSTC_ICERST         EQU (0x1:SHL:1) ;- (RSTC) ICE Interface Reset
AT91C_RSTC_PERRST         EQU (0x1:SHL:2) ;- (RSTC) Peripheral Reset
AT91C_RSTC_EXTRST         EQU (0x1:SHL:3) ;- (RSTC) External Reset
AT91C_RSTC_KEY            EQU (0xFF:SHL:24) ;- (RSTC) Password