at91sam9260.tcl

ATMEL AT91SAM9260的中段控制程序！

# -------- SDRAMC_IER : (SDRAMC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- 
set AT91C_SDRAMC_RES      [expr 0x1 <<  0 ]
# -------- SDRAMC_IDR : (SDRAMC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- 
set AT91C_SDRAMC_RES      [expr 0x1 <<  0 ]
# -------- SDRAMC_IMR : (SDRAMC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- 
set AT91C_SDRAMC_RES      [expr 0x1 <<  0 ]
# -------- SDRAMC_ISR : (SDRAMC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- 
set AT91C_SDRAMC_RES      [expr 0x1 <<  0 ]
# -------- SDRAMC_MDR : (SDRAMC Offset: 0x24) SDRAM Controller Memory Device Register -------- 
set AT91C_SDRAMC_MD       [expr 0x3 <<  0 ]
set 	AT91C_SDRAMC_MD_SDRAM                0x0
set 	AT91C_SDRAMC_MD_LOW_POWER_SDRAM      0x1

# *****************************************************************************
#              SOFTWARE API DEFINITION  FOR Static Memory Controller Interface
# *****************************************************************************
# -------- SMC_SETUP : (SMC Offset: 0x0) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x4) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x8) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0xc) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]
# -------- SMC_SETUP : (SMC Offset: 0x10) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x14) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x18) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0x1c) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]
# -------- SMC_SETUP : (SMC Offset: 0x20) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x24) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x28) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0x2c) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]
# -------- SMC_SETUP : (SMC Offset: 0x30) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x34) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x38) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0x3c) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]
# -------- SMC_SETUP : (SMC Offset: 0x40) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x44) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x48) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0x4c) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]
# -------- SMC_SETUP : (SMC Offset: 0x50) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x54) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x58) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0x5c) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]
# -------- SMC_SETUP : (SMC Offset: 0x60) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x64) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]