gif2bgi.html
来自「giflib-4.1.6.tar.gz,最新的GIF 解码库」· HTML 代码 · 共 137 行
HTML
137 行
<!doctype HTML public "-//W3O//DTD W3 HTML 2.0//EN"><HTML><HEAD><TITLE>gif2bgi</TITLE><link rev=made href=mailto:esr@snark.thyrsus.com></HEAD><BODY>Go to <a href="index.html">index page</a>.<CENTER><H1>gif2bgi</H1></CENTER>A program to display images saved as GIF files on IBM PC display devices usingthe BGI (Borland) driver interface.<P>The program operates as follows:<P><OL><LI>Reads the GIF file header and determines the image size.<P><LI>Dynamically allocates enough memory to hold all the image internally.One byte per pixel is always allocated, so a little bit more thanwidth*height (of screen, not image) bytes are required.<P><LI>Reads all the image in. Interlaced images are read in correctly, althoughthey are displayed sequentially.<P><LI>Display first image using the defaults as set by the command line option.<P><LI>Goes to interactive mode. For a full description of the interactive modesee below.<P></OL><H1>Usage:</H1><pre>gif2bgi [-q] [-d BGI dir] [-u driver] [-z zoom] [-b] [-h] gif-file</pre>If no GIF is given, gif2bgi will try to read a GIF file from stdin.<P><H1>Memory required:</H1>Screen.<H1>Options:</H1><DL><DT> [-q]<DD> Quiet mode. Default off on MSDOS, on under UNIX. Controls printout of running scan lines. Use -q- to invert.<P><DT> [-d BGI Directory]<DD> Where we should look for default drivers (as supplied by Borland). For example '-d c:/tc/bgi'.<P><DT> [-u driver]<DD> Specifies a user-defined BGI driver. If for example you have a BGI driver for your special vga called MYVGA.BGI and you want to run it in mode 2, then type '-u c:/tc/bgi/myvga.2'. Note the absolute path to the driver must be specified. Also note that we use '/' and not '\' so they won't be treated as options.<P><DT> [-z zoom]<DD> Sets zoom factor of the view. Zoom factor should be power of 2 up to 256. Default is 1 (no zoom).<P><DT> [-h]<DD> Print one line of command-line help, similar to Usage above.<P></DL><H1>Interactive mode:</H1>Once the image is displayed, the gif2bgi program goes into interactive modewhich recognizes the following commands:<P><DL><DT> C - get Color and position<DD> In this submenu, a cursor appears and the location and color of the pixel underneath it are printed. The 4 arrows may be used (shifted for faster movement) to move the cursor. Any other key will abort this submode.<P><DT> D - zoom Down <DD> Zoom down by factor of 2 unless current zoom factor is 1.<P><DT> R - Redraw<DD> Redraw the image.<P><DT> S - print Status <DD> Print status of image and program.<P><DT> U - zoom Up<DD> Zoom up by factor of 2 unless current zoom factor is 256.<P><DT> arrow keys<DD> The 4 arrow keys can be used to pan in the desired direction, if the image overflows in that direction. If the image fits into the screen, arrow keys are ignored. The panning steps are 1/2 screen if not on image end.<P><DT> SPC - abort<DD> Space bar may be used to abort current image drawing.<P><DT> ESC - abort<DD> Escape may be used to abort current image drawing.</DL><H1>Notes:</H1>This program is useless in a Unix environment and is not normallybuilt there.<P>No color quantization is used in this program; thus, if a GIF image has morecolors than the BGI driver support, this program will abort.<P>This driver is optimized for drivers with one byte per pixel (256 colors)and will run MUCH faster on such drivers.<P><H1>Bugs:</H1>For some reason I could not figure out, on my ATI wonder card, int 10h call10h (AH = AL = 10h) to set the color registers sometimes result with wrongcolors. Direct access of the card registers gives correct results.<P><H1>Author:</H1>Gershon Elber<HR><ADDRESS>Eric S. Raymond <A HREF="mailto:esr@thyrsus.com"><esr@snark.thyrsus.com></A></ADDRESS></BODY></HTML>⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?