xf86config

一份介绍在S3C2410上液晶屏驱动程序的实现

# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "TouchRS" "SendCoreEvents"
#        InputDevice    "TouchUSB" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

#    FontPath   "unix/:7100"
     FontPath   "/usr/X11R6/lib/X11/fonts/misc"

EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
	Load  "fbdevhw"
	Load  "dri"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#	Option	"AutoRepeat"	"500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"pc105"
	Option	"XkbLayout"	"us"
	#Option	"XkbVariant"	""
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection


#Section "InputDevice"
#	Identifier	"Mouse1"
#	Driver		"mouse"
#	Option		"Device"		"/dev/input/mice"
#	Option		"Protocol"		"IMPS/2"
#	Option		"Emulate3Buttons"	"no"
#	Option		"ZAxisMapping"		"4 5"
#EndSection

Section "InputDevice"
    Identifier  "TouchRS"
    Driver      "dmc"
    Option      "Device"  "/dev/ttyS0"
	Option	    "SaveFile" "/etc/X11/dmc_calib.dat"
EndSection

Section "InputDevice"
    Identifier  "TouchUSB"
    Driver      "dmc"
    Option      "USB"  "1"
    Option      "Device"  "/dev/usb/dmc0"
	Option	    "SaveFile" "/etc/X11/dmc_calib.dat"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   30-80
        VertRefresh 55-75
        Option "dpms"

	
EndSection

Section "Device"
	# no known options
	Identifier   "VESA driver (generic)"
        Driver       "vesa"
        VendorName   "VESA driver (generic)"
        BoardName     "VESA driver (generic)"
        
        #BusID
EndSection

Section "Screen"
	Identifier   "Screen0"
        Device       "VESA driver (generic)"
        Monitor      "Monitor0"
	DefaultDepth	16

	Subsection "Display"
        	Depth       16
                Modes       "800x600" "640x480" 
#                Modes       "1024x768" "800x600" "640x480" 
	EndSubsection

EndSection

Section "DRI"
	Mode 0666
EndSection