muticom.c

来自「基于89c2051开发的ptr8000一对多无线通信程序.」· C语言 代码 · 共 147 行

#include <reg51.h>
#include <stdio.h>
bit startframe=0,com2rb=1,lastcom2rb=1;
unsigned char TLV=0xb0;      //Now is 16 times of baud,0xc0; //for 18432000,4 times baudrate,
unsigned char THV=0xff;      //                        0xfe; if 8times baudrate it's 0x60 and 0xff respectively.
unsigned char com2sbufp=0,com2buffs[2],com2buffr[20],com2buffrp=0;
unsigned short SECTICKS=19200; //4800; //65536/(65536-(THV*256+TLV))*18;
unsigned short HALFSECTICKS=9600; //2400;
unsigned char rbuff[20],sbuff[11];
unsigned char rbuffp=0;
unsigned char triggle=0,chno=0,ensend=0,rest;
unsigned char ticks1=0,ticks2=0,ticksl2=0,ticksh2=0,ticks3,numberofzero=0,numberofone=16;
unsigned char temptl0,tempth0;
unsigned short filterB=0xffff,count=0,com2sbuf;
//sbit P32 = P3^2;
sbit COM2R=P3^2; //P3^0;
sbit COM2S=P3^1;
void delay()
{
 unsigned short i,j;
 for(i=0;i<30;i++) j=i;
}
void e0int() interrupt 0
{
 P1=P1 ^ 0x80; // Feed watchdog.
 ticks3++;
}
void e1int() interrupt 2
{
 ticks1++;
}
void t0int() interrupt 1
{
 // unsigned char i;
 temptl0=TL0;
 tempth0=TH0;
 TH0=THV+tempth0;
 TL0=TLV+temptl0+10;
 //if(!(filterB&0x8000)) numberofzero--;
 filterB<<=1;
 filterB&=0xfffe;
 filterB|=COM2R;
 //if(!(filterB&1)) numberofzero++;
 switch (filterB&0x3f)
 {
  case 0x3f:
       com2rb=1;
	   break;
  case 0:
       com2rb=0;
       if((!startframe)) // && (numberofzero>7)) // && (filterB&0xf)) // && (lastcom2rb) && (numberofzero>=8))
	   {
	    startframe=1;
	    com2sbufp=0;
	    rest=count&0xf;
	   }
	   break;
  default:
       break;
 }
 lastcom2rb=com2rb;
 if(startframe && ((count&0xf) == rest))
 {
  com2sbuf>>=1;
  com2sbuf&=0xfeff;
  if(com2rb) com2sbuf|=0x0100;
  com2sbufp++;
  if(com2sbufp==10)
  {
   startframe=0;
   if(com2sbuf&0x100)
   {
    com2buffr[com2buffrp]=com2sbuf;
	SBUF=com2sbuf;
	if((com2buffr[com2buffrp] == 'E') && (com2buffr[(com2buffrp+19)%20] == 0) && (com2buffr[(com2buffrp+16)%20] == 'S'))
    {
	 //TI=0;
     //SBUF=com2buffr[(com2buffrp+17)%20];
	 sbuff[4]=com2buffr[(com2buffrp+17)%20];
	 sbuff[5]=com2buffr[(com2buffrp+18)%20];
	}
    if(++com2buffrp==20) com2buffrp=0;
   }
  }
 }
 count++;
 if(count == SECTICKS)
 {
  count=0;
  triggle=1;
 }
}
void comint() interrupt 4
{
 if(RI)
 {
  RI=0;
  rbuff[rbuffp]=SBUF;
  if((rbuff[rbuffp] == 'E') && (rbuff[(rbuffp+11)%20] == 'S') && (rbuff[(rbuffp+12)%20] == '0'))
  {
   switch (rbuff[(rbuffp+13)%20])
   {
    case 'A': ensend=1;
	break;
    case 'D':
	break;
	default:break;
   }
  }
  rbuffp++;
  if(rbuffp == 20) rbuffp=0;
 }
}
void main (void)
{
 unsigned char i;
 sbuff[0]=0xff;	
 sbuff[1]=0xd7;
 sbuff[2]=0x06;
 sbuff[3]='S';
 sbuff[8]=0x00;
 sbuff[9]='E';
 SCON  = 0x50;		        /* SCON: mode 1, 8-bit UART, enable rcvr      */
 TMOD |= 0x21;               /* TMOD: timer 1, mode 2, 8-bit reload        */
 TH1   = 0xd8;                /* TH1:  reload value for 1200 baud @ 184320000MHz   */
 TR1   = 1;                  /* TR1:  timer 1 run                          */
 IT1   = 1;
 IT0   = 1;
 TI    = 1;                  /* TI:   set TI to send first char of UART    */
 TR0   = 1;
 IE    = 0x82;     //Only enable t0 interrupt.
 while (1)
 {
  if (triggle==1)
  {
   //P32=0;
   sbuff[6]=P1;
   sbuff[7]=P1;
   //for(i=0;i<10;i++) putchar(sbuff[i]);
   //putchar(temptl0);
   triggle=0;
   //P32=1;
  }
  delay();
 }
}