📄 display.c
字号:
//#################################################
// 2006年11月
// Ver 1.0
// GCA-150A
// 完成人:黄光林
//modify: 2006-11
//#################################################
#include "Define.h"
#include "maindef.h"
#include "LCD.h"
#include "Display.h"
#include "table.H"
#include "P103_mmi2dsp.h"
/******************ARM TO DSP 交换数据所需的变量*********************888*/
UC Return_flag;
UC Flag_Password_True=0;
UI YC_Value[YC_NUM]; /*数组存所有YC数据*/
UI YC_Value1[YC_NUM]; /*数组存所有YC数据*/
short YC_POWER_P;//有功功率
short YC_POWER_Q;//无功功率
struct System_Info_fm System_Info; //实时信息
unsigned char TargetArea; //目标区（用于复制定值）
unsigned char SourceArea; //原始区（用于复制定值）
struct SOE_Buf_Show_fm SOE_Buf_Show0; //存放SOE的缓冲区
struct Report_Buf_Show_fm Report_Buf_Show0;
struct SoftInformation_fm SoftInformation;
struct Setting_Copy_fm Setting_Copy;
struct Setting_Switch_fm Setting_Switch;
struct Output_Test_YK_fm Output_Test_YK;
struct Channel_Ration_Flag_fm Channel_Ration_Flag;
struct YYB_Modify_Flag_fm YYB_Modify_Flag;
struct Fault_Recode_Flag_fm Fault_Recode_Flag; //召唤故障报告/SOE缓冲区
struct Harmonic_Value_fm Harmonic_Value;
struct Time_buf realtime;
struct Time_buf realtime1; //实时时钟修改用
unsigned int System_config[CONFIG_NUM]; //系统配置
unsigned int System_setting[SETTING_NUM]; //定值
/*+++++++++++++++++++++++++++++++内部用+++++++++++++++++++++++++*/
UI System_config_Old[CONFIG_NUM]; //系统配置
UI System_setting_Old[SETTING_NUM]; //定值
UI YC_Value1_Change[10];
UI Screen_state = 1;
UI L_Screen_state = 0;
UI Outport_FixedValue=0;
UC SubMenuPosition=0, menupage=0,SubMenuPosition_temp=0;
UC Father1_MenuPosition=0,Father2_MenuPosition=0,Father3_MenuPosition=0;
UC Father2_page=0,Father3_page=0;
UC CT_Type=0,Select_CT_Type=0,Auto_CT_Type=0;
UI temp1=0;
UC PassWordNum,PassWordchanged=0;
UI PASSWord_temp,PASSWord;
UI Returnto_Modify;
/*
修改返回地址
0 系统信息
4 自动调整
5 手动调整
6 时钟调整
7 TA 参数
8 TV参数
9 开出传动
10 端口信息
11 压板投退
12 遥信参数
101~112 定值修改
116 查看SOE
211 事件报告
212 故障简报
213 操作记录
*/
UI Returnto_Save;
/*
保存返回地址
5 手动调整
6 时钟调整
7 TA 参数
8 TV参数
9
10 端口信息
11 压板投退
12 遥信参数
18 遥分操作
19 遥合操作
20~30 开出传动
101~112 定值修改
*/
UC Key_UP,Key_DOWN,Key_LEFT,Key_RIGHT,Key_OK,Key_CANCEL,Key_FUGUI,Key_ADD,Key_SUB;
UC L_Key_UP,L_Key_DOWN,L_Key_LEFT,L_Key_RIGHT,L_Key_OK,L_Key_CANCEL,L_Key_FUGUI,L_Key_ADD,L_Key_SUB;
UC Key_ADD_Long,Key_SUB_Long;
UC FixedValue_Num=0;//临时定值区号
UC FixedValue_Switch_Num=0;//定值切换区号
UC PC_Comm_Flag=0;
UC New_Information_Flag=0;
UI Rs485_Baud;//通信参数用
UC Sametime_Phase=0;
UC time_modify_flag=0;
UC update_flag1=0;
UC Output_Select_Flag=0;//开出传动用
UC Harmonic_Num=2;
UC Soe_Num=0;
UC Fault_Num=0;
UC Command_Flag=0;
UI Cmd_ArmToDsp;
UI CmdReturn_True_Flag=0;
UI CmdReturn_Erro_Flag=0;
UC Cmd_Exectue_Flag=0;
UC CmdExectue_Erro_Flag=0;
UC PT_num;
struct Limit
{
UI Low_Limit;
UI Up_Limit;
UI step_Size;
}; //下限上限步长
const struct Limit PT_Limit={0,250,1};//*10
const struct Limit PT_FF_Limit={0,400,1};//*10
const struct Limit CT_YF_Limit={0,5000,1};
const struct Limit CT_FF_Limit={1,5,4};
const struct Limit YXTime_Limit={0,32000,1};
const struct Limit YMBase_Limit={0,999999999,1};
const struct Limit FXP_Limit={10,20000,1};
const struct Limit P_Limit={50,20000,1};
const struct Limit IntegralWidth_Limit={0,250,1};
const struct Limit Control_Word_Limit={0,1,1};
const struct Limit FXCurrent_Limit={5,9999,1};//*100
const struct Limit GZCurrent_Limit={5,9999,1};//*100
const struct Limit Current_Limit={5,9999,1};//*100
const struct Limit Voltage_Limit={50,15000,1};//*100
const struct Limit GVoltage_Limit={50,15000,1};//*100
const struct Limit Time_Limit={3,9999,1};//*100
const struct Limit PTime_Limit={3,20000,1};//*100
const struct Limit KZD_Limit={0,100,1};
const struct Limit K_Limit={20,9999,1};
const struct Limit Freq_limit={4000,6000,1};//*100
const struct Limit GFreq_limit={4000,6000,1};//*100
const struct Limit Huacha_limit={0,1000,1};
const struct Limit Changle_limit={0,9000,100};//*10重合角度
const struct Limit Channel_limit={8000,12000,1};//*10
const struct Limit Harmonic_limit={2,23,1};//谐波次数
const struct Limit XBGJ_limit={0,100,1};//谐波告警
const UI Setting_Init[SETTING_NUM]=
{0,0,7000,100,7000,100,11000,100,11000,100,
5000,100,7000,100,7000,100,11000,100,11000,100,
5000,100,7000,100,7000,100,11000,100,11000,100,
5000,100,7000,100,7000,100,11000,100,11000,100,
5000,100,
};
const UI Config_Init[CONFIG_NUM]=
{ 1, 9600, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100,
100,
};
extern UC display_buf[20];
extern UC ucsigned_60s;
extern US ucsigned_60s_Count;
extern UC ucsigned_1000ms_flag;
//++++++++++++++++++++++++++++++函数声明区++++++++++++++++++++++++++++++++++
void Dalog_Info_Show(UC value,UC key,UC type);
void FirstRun_Bmp_View(void);
void Second_Measurevalue_Show(UC page);
void Second_Measurevalue1_Show(UC page);
void Run_Bmp_Value_Show(void);
void RealYX_Show(UC page,UC select);
void RealPower_Show(UC page);
void Screen_MainMenu(void);
void ViewPassword(UC num);
void Comm_Information_Show(UC page,UC select);
void YxTime_Value_Show(UC page,UC select);
void Yaban_Control_Show(UC page,UC select );//压板
void Yaban_Control_Modify(void);
void System_Config_Show(UC page,UC select);
void Outport_Test_Show(UC page,UC select);
void Channel_Adjust_Manual(void);
void Channel_Value_Show(UC page,UC select) ;
void Channel_Adjust_Auto(void);
void Function_Introduction(void);
void Version_Show(void);
void System_Reset(void);
void FixedValue_A_Show(UC page,UC select);
void Fault_Record_Show(UC select);
void Look_Soe_Show(void);
void FixedValue_Manage_Show(UC page ,UC select);
void System_Help_show(UC select);
void FixedValue_A_FYGI_Show(UC page,UC select );//定值组A－零序过流
void FixedValue_A_FYGI_Modify(void);/*定值组A－零序过流*/
void Outport_Setting_Show(UC page ,UC select);
void Outport_Value_Show(UC page,UC select);
void New_Information(void);
void Frame_Show(UC select);
void Data_Save(void);
void Data_Select_Save(void);
void Data_Select_show(UC select);
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//+++++++++++++++++++++++++++++++++++++++++++++++++
//
// 函数原代码区
//+++++++++++++++++++++++++++++++++++++++++++++++++
void delayfor(long count)
{
long i,j;
for(i=0;i<count;i++)
for(j=0;j<10;j++);
}
/*显示定值组*/
/*键盘检查*/
void Updata_key(US Key)
{
static UC ucTempADD=0,ucTempSUB=0;
L_Key_UP = Key_UP;
L_Key_DOWN = Key_DOWN;
L_Key_LEFT = Key_LEFT;
L_Key_RIGHT = Key_RIGHT;
L_Key_OK = Key_OK;
L_Key_CANCEL = Key_CANCEL;
L_Key_FUGUI = Key_FUGUI;
L_Key_ADD= Key_ADD;
L_Key_SUB= Key_SUB;
if( (Key&0x1ff) != 0x1ff)
{System_Info.MMI_Statue=0x00;ucsigned_60s=0;ucsigned_60s_Count=0;}
if( (Key&0x02) != 0) Key_CANCEL = 0;
else Key_CANCEL = 1;
if( (Key&0x0080) != 0) Key_LEFT = 0;
else Key_LEFT = 1;
if( (Key&0x0040) != 0) Key_DOWN= 0;
else Key_DOWN= 1;
if( (Key&0x0020) != 0) Key_UP = 0;
else Key_UP = 1;
if( (Key&0x0100) != 0) Key_RIGHT= 0;
else Key_RIGHT = 1;
if( (Key&0x0001) != 0) Key_OK = 0;//0x004
else Key_OK = 1;
if( (Key&0x0010) != 0) Key_ADD = 0;//0x0008
else Key_ADD = 1;
if( (Key&0x0008) != 0) Key_SUB = 0;//0x0010
else Key_SUB = 1;
if( (Key&0x004) != 0) Key_FUGUI = 0;//0x0001
else Key_FUGUI = 1;
/*ADD*/
if( Key_ADD==1 )
{
ucTempADD++;
if( ucTempADD > 50 )
{ ucTempADD=45; Key_ADD_Long=1; }
}
else
{
// if( ucTempADD > 5 ) { Key_Up_Change=1; } /*按键*/
ucTempADD=0; Key_ADD_Long=0;
}
/*SUB*/
if( Key_SUB==1 )
{
ucTempSUB++;
if( ucTempSUB > 50 )
{ ucTempSUB=45; Key_SUB_Long=1; }
}
else
{
// if( ucTempDown > 5 ) { Key_Down_Change=1; } /*按键*/
ucTempSUB=0; Key_SUB_Long=0;
}
}
//############################################################
// 以下为菜单结构程序：
//
//
// 第一部分
//############################################################
void Screen_Logo(void)
{
if(L_Screen_state!=0)
{
Logo_View();
L_Screen_state=0;
}
if((Key_OK==0 )&&(L_Key_OK==1))
{
Screen_state =1;
L_Key_OK = Key_OK;
}
}
/*一次系统运行图*/
void FirstRun_Bmp_View(void)
{
if(L_Screen_state!=2)
{
Run_Bmp_View();
//Run_Bmp_Value_Show();
State_Time_Show();
L_Screen_state=2;
}
if((Key_OK==0 )&&(L_Key_OK==1))
{
Screen_state =1;
L_Key_OK = Key_OK;
}
}
//++++++++++++++主菜单++++++++++++++++++
// 实时数据
// 报告信息
// 保护定值
// 系统信息
// 控制操作
// 帮助信息
//++++++++++++++++++++++++++++++++++++++++=
void Screen_MainMenu(void)
{
UC i;
if(L_Screen_state!=1)
{
L_Screen_state=1;
cls();
Logo_Title();
LCDPrintf(0,0,0,"拾主菜单",8);
for(i=0;i<6;i++)
LCDPrintf( 1,1,(i+1)*16,(char *)mainMenu[i],20);
SubMenuPosition= Father1_MenuPosition;
if(SubMenuPosition>6) SubMenuPosition = 0;
LCDPrintf( 0,1,(SubMenuPosition+1)*16,(char *)mainMenu[SubMenuPosition],20);
Frame_Show(0);
}
if((Key_UP==0 )&&(L_Key_UP==1))
{
L_Key_UP = Key_UP;
LCDPrintf( 1,1,(SubMenuPosition+1)*16,(char *)mainMenu[SubMenuPosition],20);
if( SubMenuPosition == 0) SubMenuPosition = 5;
else SubMenuPosition--;
LCDPrintf( 0,1,(SubMenuPosition+1)*16,(char *)mainMenu[SubMenuPosition],20);
Frame_Show(0);
}
if((Key_DOWN==0 )&&(L_Key_DOWN==1))
{
L_Key_DOWN = Key_DOWN;
LCDPrintf( 1,1,(SubMenuPosition+1)*16,(char *)mainMenu[SubMenuPosition],20);
if( SubMenuPosition == 5) SubMenuPosition = 0;
else SubMenuPosition++;
LCDPrintf( 0,1,(SubMenuPosition+1)*16,(char *)mainMenu[SubMenuPosition],20);
Frame_Show(0);
}
if((Key_OK==0 )&&(L_Key_OK==1))
{
L_Key_OK = Key_OK;
if(((SubMenuPosition<6)&&(SubMenuPosition!=3))||(((System_Info.LED_Statue&0x02)==0x02)&&(SubMenuPosition==3)))
Screen_state =(1+SubMenuPosition)*10+1;
if(SubMenuPosition==3)
{
MMI_DSP_Instruction(0x0500,0,0);/*读系统定值*/
Dalog_Info_Show(0, 7, 0);
Command_Flag=1;
}
Father1_MenuPosition=SubMenuPosition;
Father2_MenuPosition=0;
Father2_page=0;
}
if((Key_CANCEL==0 )&&(L_Key_CANCEL==1))
{
Screen_state =2;
SubMenuPosition = 0;
Father1_MenuPosition=0;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -