bit1.c

用freescale 8bitMCU做的触摸屏软件

/** ###################################################################
**     THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
**     Filename  : Bit1.C
**     Project   : touchpanal
**     Processor : MC9S08QG8CDT
**     Beantype  : BitIO
**     Version   : Bean 02.068, Driver 03.13, CPU db: 2.87.115
**     Compiler  : CodeWarrior HCS08 C Compiler
**     Date/Time : 2007-9-14, 12:46
**     Abstract  :
**         This bean "BitIO" implements an one-bit input/output.
**         It uses one bit/pin of a port.
**         Note: This bean is set to work in Input direction only.
**         Methods of this bean are mostly implemented as a macros
**         (if supported by target language and compiler).
**     Settings  :
**         Used pin                    :
**             ----------------------------------------------------
**                Number (on package)  |    Name
**             ----------------------------------------------------
**                       13            |  PTA3_KBIP3_SCL_ADP3
**             ----------------------------------------------------
**
**         Port name                   : PTA
**
**         Bit number (in port)        : 3
**         Bit mask of the port        : $0008
**
**         Initial direction           : Input (direction cannot be changed)
**         Initial output value        : 0
**         Initial pull option         : off
**
**         Port data register          : PTAD      [$0000]
**         Port control register       : PTADD     [$0001]
**         Port function register      : KBIPE     [$000D]
**
**         Optimization for            : speed
**     Contents  :
**         GetVal - bool Bit1_GetVal(void);
**
**     (c) Copyright UNIS, spol. s r.o. 1997-2006
**     UNIS, spol. s r.o.
**     Jundrovska 33
**     624 00 Brno
**     Czech Republic
**     http      : www.processorexpert.com
**     mail      : [e-mail]
** ###################################################################*/

/* MODULE Bit1. */

#include "Bit1.h"
  /* Including shared modules, which are used in the whole project */
#include "PE_Types.h"
#include "PE_Error.h"
#include "PE_Const.h"
#include "IO_Map.h"
#include "Cpu.h"


/*
** ===================================================================
**     Method      :  Bit1_GetVal (bean BitIO)
**
**     Description :
**         This method returns an input value.
**           a) direction = Input  : reads the input value from the
**                                   pin and returns it
**           b) direction = Output : returns the last written value
**         Note: This bean is set to work in Input direction only.
**     Parameters  : None
**     Returns     :
**         ---             - Input value. Possible values:
**                           FALSE - logical "0" (Low level)
**                           TRUE - logical "1" (High level)

** ===================================================================
*/
/*
bool Bit1_GetVal(void)

**  This method is implemented as a macro. See Bit1.h file.  **
*/


/* END Bit1. */
/*
** ###################################################################
**
**     This file was created by UNIS Processor Expert 3.00 [03.89]
**     for the Freescale HCS08 series of microcontrollers.
**
** ###################################################################
*/