xmlconfiguratorattribute.cs

精通SQL Server2005项目开发

#region Copyright & License
//
// Copyright 2001-2005 The Apache Software Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#endregion

// .NET Compact Framework 1.0 has no support for reading assembly attributes
#if !NETCF

using System;
using System.Reflection;
using System.IO;

using log4net.Util;
using log4net.Repository;
using log4net.Repository.Hierarchy;

namespace log4net.Config
{
	/// <summary>
	/// Assembly level attribute to configure the <see cref="XmlConfigurator"/>.
	/// </summary>
	/// <remarks>
	/// <para>
	/// This attribute may only be used at the assembly scope and can only
	/// be used once per assembly.
	/// </para>
	/// <para>
	/// Use this attribute to configure the <see cref="XmlConfigurator"/>
	/// without calling one of the <see cref="XmlConfigurator.Configure()"/>
	/// methods.
	/// </para>
	/// <para>
	/// If neither of the <see cref="ConfigFile"/> or <see cref="ConfigFileExtension"/>
	/// properties are set the configuration is loaded from the application's .config file.
	/// If set the <see cref="ConfigFile"/> property takes priority over the
	/// <see cref="ConfigFileExtension"/> property. The <see cref="ConfigFile"/> property
	/// specifies a path to a file to load the config from. The path is relative to the
	/// application's base directory; <see cref="AppDomain.BaseDirectory"/>.
	/// The <see cref="ConfigFileExtension"/> property is used as a postfix to the assembly file name.
	/// The config file must be located in the  application's base directory; <see cref="AppDomain.BaseDirectory"/>.
	/// For example in a console application setting the <see cref="ConfigFileExtension"/> to
	/// <c>config</c> has the same effect as not specifying the <see cref="ConfigFile"/> or 
	/// <see cref="ConfigFileExtension"/> properties.
	/// </para>
	/// <para>
	/// The <see cref="Watch"/> property can be set to cause the <see cref="XmlConfigurator"/>
	/// to watch the configuration file for changes.
	/// </para>
	/// <note>
	/// <para>
	/// Log4net will only look for assembly level configuration attributes once.
	/// When using the log4net assembly level attributes to control the configuration 
	/// of log4net you must ensure that the first call to any of the 
	/// <see cref="log4net.Core.LoggerManager"/> methods is made from the assembly with the configuration
	/// attributes. 
	/// </para>
	/// <para>
	/// If you cannot guarantee the order in which log4net calls will be made from 
	/// different assemblies you must use programmatic configuration instead, i.e.
	/// call the <see cref="XmlConfigurator.Configure()"/> method directly.
	/// </para>
	/// </note>
	/// </remarks>
	/// <author>Nicko Cadell</author>
	/// <author>Gert Driesen</author>
	[AttributeUsage(AttributeTargets.Assembly)]
	[Serializable]
	public /*sealed*/ class XmlConfiguratorAttribute : ConfiguratorAttribute
	{
		//
		// Class is not sealed because DOMConfiguratorAttribute extends it while it is obsoleted
		// 

		/// <summary>
		/// Default constructor
		/// </summary>
		/// <remarks>
		/// <para>
		/// Default constructor
		/// </para>
		/// </remarks>
		public XmlConfiguratorAttribute() : base(0) /* configurator priority 0 */
		{
		}

		#region Public Instance Properties

		/// <summary>
		/// Gets or sets the filename of the configuration file.
		/// </summary>
		/// <value>
		/// The filename of the configuration file.
		/// </value>
		/// <remarks>
		/// <para>
		/// If specified, this is the name of the configuration file to use with
		/// the <see cref="XmlConfigurator"/>. This file path is relative to the
		/// <b>application base</b> directory (<see cref="AppDomain.BaseDirectory"/>).
		/// </para>
		/// <para>
		/// The <see cref="ConfigFile"/> takes priority over the <see cref="ConfigFileExtension"/>.
		/// </para>
		/// </remarks>
		public string ConfigFile
		{
			get { return m_configFile; }
			set { m_configFile = value; }
		}

		/// <summary>
		/// Gets or sets the extension of the configuration file.
		/// </summary>
		/// <value>
		/// The extension of the configuration file.
		/// </value>
		/// <remarks>
		/// <para>
		/// If specified this is the extension for the configuration file.
		/// The path to the config file is built by using the <b>application 
		/// base</b> directory (<see cref="AppDomain.BaseDirectory"/>),
		/// the <b>assembly file name</b> and the config file extension.
		/// </para>
		/// <para>
		/// If the <see cref="ConfigFileExtension"/> is set to <c>MyExt</c> then
		/// possible config file names would be: <c>MyConsoleApp.exe.MyExt</c> or
		/// <c>MyClassLibrary.dll.MyExt</c>.
		/// </para>
		/// <para>
		/// The <see cref="ConfigFile"/> takes priority over the <see cref="ConfigFileExtension"/>.
		/// </para>
		/// </remarks>
		public string ConfigFileExtension
		{
			get { return m_configFileExtension; }
			set { m_configFileExtension = value; }
		}

		/// <summary>
		/// Gets or sets a value indicating whether to watch the configuration file.
		/// </summary>
		/// <value>
		/// <c>true</c> if the configuration should be watched, <c>false</c> otherwise.
		/// </value>
		/// <remarks>
		/// <para>
		/// If this flag is specified and set to <c>true</c> then the framework
		/// will watch the configuration file and will reload the config each time 
		/// the file is modified.
		/// </para>
		/// <para>
		/// The config file can only be watched if it is loaded from local disk.
		/// In a No-Touch (Smart Client) deployment where the application is downloaded
		/// from a web server the config file may not reside on the local disk
		/// and therefore it may not be able to watch it.
		/// </para>
		/// <note>
		/// Watching configuration is not supported on the SSCLI.
		/// </note>
		/// </remarks>
		public bool Watch
		{
			get { return m_configureAndWatch; }
			set { m_configureAndWatch = value; }
		}

		#endregion Public Instance Properties

		#region Override ConfiguratorAttribute

		/// <summary>
		/// Configures the <see cref="ILoggerRepository"/> for the specified assembly.
		/// </summary>
		/// <param name="sourceAssembly">The assembly that this attribute was defined on.</param>
		/// <param name="targetRepository">The repository to configure.</param>
		/// <remarks>
		/// <para>
		/// Configure the repository using the <see cref="XmlConfigurator"/>.
		/// The <paramref name="targetRepository"/> specified must extend the <see cref="Hierarchy"/>
		/// class otherwise the <see cref="XmlConfigurator"/> will not be able to
		/// configure it.
		/// </para>
		/// </remarks>
		/// <exception cref="ArgumentOutOfRangeException">The <paramref name="repository" /> does not extend <see cref="Hierarchy"/>.</exception>
		override public void Configure(Assembly sourceAssembly, ILoggerRepository targetRepository)
		{
			string applicationBaseDirectory = null;
			try
			{
				applicationBaseDirectory = SystemInfo.ApplicationBaseDirectory;
			}
			catch
			{
				// Ignore this exception because it is only thrown when ApplicationBaseDirectory is a file
				// and the application does not have PathDiscovery permission
			}

			if (applicationBaseDirectory == null || (new Uri(applicationBaseDirectory)).IsFile)
			{
				ConfigureFromFile(sourceAssembly, targetRepository);
			}
			else
			{
				ConfigureFromUri(sourceAssembly, targetRepository);
			}
		}

		#endregion

		/// <summary>
		/// Attempt to load configuration from the local file system
		/// </summary>
		/// <param name="sourceAssembly">The assembly that this attribute was defined on.</param>
		/// <param name="targetRepository">The repository to configure.</param>
		private void ConfigureFromFile(Assembly sourceAssembly, ILoggerRepository targetRepository)
		{
			// Work out the full path to the config file
			string fullPath2ConfigFile = null;
			
			// Select the config file
			if (m_configFile == null || m_configFile.Length == 0)
			{
				if (m_configFileExtension == null || m_configFileExtension.Length == 0)
				{
					// Use the default .config file for the AppDomain
					try
					{
						fullPath2ConfigFile = SystemInfo.ConfigurationFileLocation;
					}
					catch(Exception ex)
					{
						LogLog.Error("XmlConfiguratorAttribute: Exception getting ConfigurationFileLocation. Must be able to resolve ConfigurationFileLocation when ConfigFile and ConfigFileExtension properties are not set.", ex);
					}
				}
				else
				{
					// Force the extension to start with a '.'
					if (m_configFileExtension[0] != '.')
					{
						m_configFileExtension = "." + m_configFileExtension;
					}

					string applicationBaseDirectory = null;
					try
					{
						applicationBaseDirectory = SystemInfo.ApplicationBaseDirectory;
					}
					catch(Exception ex)
					{
						LogLog.Error("XmlConfiguratorAttribute: Exception getting ApplicationBaseDirectory. Must be able to resolve ApplicationBaseDirectory and AssemblyFileName when ConfigFileExtension property is set.", ex);
					}

					if (applicationBaseDirectory != null)
					{
						fullPath2ConfigFile = Path.Combine(applicationBaseDirectory, SystemInfo.AssemblyFileName(sourceAssembly) + m_configFileExtension);
					}
				}
			}
			else
			{
				string applicationBaseDirectory = null;
				try
				{
					applicationBaseDirectory = SystemInfo.ApplicationBaseDirectory;
				}
				catch(Exception ex)
				{
					LogLog.Warn("XmlConfiguratorAttribute: Exception getting ApplicationBaseDirectory. ConfigFile property path ["+m_configFile+"] will be treated as an absolute path.", ex);
				}

				if (applicationBaseDirectory != null)
				{
					// Just the base dir + the config file
					fullPath2ConfigFile = Path.Combine(applicationBaseDirectory, m_configFile);
				}
				else
				{
					fullPath2ConfigFile = m_configFile;
				}
			}

			if (fullPath2ConfigFile != null)
			{
				ConfigureFromFile(targetRepository, new FileInfo(fullPath2ConfigFile));
			}
		}

		/// <summary>
		/// Configure the specified repository using a <see cref="FileInfo"/>
		/// </summary>
		/// <param name="targetRepository">The repository to configure.</param>
		/// <param name="configFile">the FileInfo pointing to the config file</param>
		private void ConfigureFromFile(ILoggerRepository targetRepository, FileInfo configFile)
		{
#if (SSCLI)
			if (m_configureAndWatch)
			{
				LogLog.Warn("XmlConfiguratorAttribute: Unable to watch config file not supported on SSCLI");
			}
			XmlConfigurator.Configure(targetRepository, configFile);
#else
			// Do we configure just once or do we configure and then watch?
			if (m_configureAndWatch)
			{
				XmlConfigurator.ConfigureAndWatch(targetRepository, configFile);
			}
			else
			{
				XmlConfigurator.Configure(targetRepository, configFile);
			}
#endif
		}

		/// <summary>
		/// Attempt to load configuration from a URI
		/// </summary>
		/// <param name="sourceAssembly">The assembly that this attribute was defined on.</param>
		/// <param name="targetRepository">The repository to configure.</param>
		private void ConfigureFromUri(Assembly sourceAssembly, ILoggerRepository targetRepository)
		{
			// Work out the full path to the config file
			Uri fullPath2ConfigFile = null;
			
			// Select the config file
			if (m_configFile == null || m_configFile.Length == 0)
			{
				if (m_configFileExtension == null || m_configFileExtension.Length == 0)
				{
					string systemConfigFilePath = null;
					try
					{
						systemConfigFilePath = SystemInfo.ConfigurationFileLocation;
					}
					catch(Exception ex)
					{
						LogLog.Error("XmlConfiguratorAttribute: Exception getting ConfigurationFileLocation. Must be able to resolve ConfigurationFileLocation when ConfigFile and ConfigFileExtension properties are not set.", ex);
					}

					if (systemConfigFilePath != null)
					{
						Uri systemConfigFileUri = new Uri(systemConfigFilePath);

						// Use the default .config file for the AppDomain
						fullPath2ConfigFile = systemConfigFileUri;
					}
				}
				else
				{
					// Force the extension to start with a '.'
					if (m_configFileExtension[0] != '.')
					{
						m_configFileExtension = "." + m_configFileExtension;
					}

					string systemConfigFilePath = null;
					try
					{
						systemConfigFilePath = SystemInfo.ConfigurationFileLocation;
					}
					catch(Exception ex)
					{
						LogLog.Error("XmlConfiguratorAttribute: Exception getting ConfigurationFileLocation. Must be able to resolve ConfigurationFileLocation when the ConfigFile property are not set.", ex);
					}

					if (systemConfigFilePath != null)
					{
						UriBuilder builder = new UriBuilder(new Uri(systemConfigFilePath));

						// Remove the current extension from the systemConfigFileUri path
						string path = builder.Path;
						int startOfExtension = path.LastIndexOf(".");
						if (startOfExtension >= 0)
						{
							path = path.Substring(0, startOfExtension);
						}
						path += m_configFileExtension;

						builder.Path = path;
						fullPath2ConfigFile = builder.Uri;
					}
				}
			}
			else
			{
				string applicationBaseDirectory = null;
				try
				{
					applicationBaseDirectory = SystemInfo.ApplicationBaseDirectory;
				}
				catch(Exception ex)
				{
					LogLog.Warn("XmlConfiguratorAttribute: Exception getting ApplicationBaseDirectory. ConfigFile property path ["+m_configFile+"] will be treated as an absolute URI.", ex);
				}

				if (applicationBaseDirectory != null)
				{
					// Just the base dir + the config file
					fullPath2ConfigFile = new Uri(new Uri(applicationBaseDirectory), m_configFile);
				}
				else
				{
					fullPath2ConfigFile = new Uri(m_configFile);
				}
			}

			if (fullPath2ConfigFile != null)
			{
				if (fullPath2ConfigFile.IsFile)
				{
					// The m_configFile could be an absolute local path, therefore we have to be
					// prepared to switch back to using FileInfos here
					ConfigureFromFile(targetRepository, new FileInfo(fullPath2ConfigFile.LocalPath));
				}
				else
				{
					if (m_configureAndWatch)
					{
						LogLog.Warn("XmlConfiguratorAttribute: Unable to watch config file loaded from a URI");
					}
					XmlConfigurator.Configure(targetRepository, fullPath2ConfigFile);
				}
			}
		}

		#region Private Instance Fields

		private string m_configFile = null;
		private string m_configFileExtension = null;
		private bool m_configureAndWatch = false;

		#endregion Private Instance Fields
	}
}

#endif // !NETCF