cfg_intech_8202s_816.h

Sunplus 8202S source code.

#define VERSION_STRING      "02S-816"   //version: xxx-yyy, 20030422

#define SUPPORT_SCHINESE_OSD
//---------------------
//board parts settings
//---------------------
//SDRAM settings(bus width, default is 16-bits mode)
//#define SDRAM_BUS_32BITS        //define it to use 32 bits SDRAM Bus width


#define SDRAM_16Mb_Mode       //only use 16Mb*1 SDRAM

/*
* Define Disc detect polling time
*/
#define DETECT_TIMES    0xff
#define NO_DISC_TIMES   30

//#define SUPPORT_CD_TEXT
#ifdef SUPPORT_CD_TEXT
    #define OSD_FONT_API
#endif

/*
*  Video seting
*/
/*#define PC_VGA_OUT*/
/*#define TV_YUV_OUT*/
#define S_VIDEO_OUT

//#define DIGITAL_VIDEO_OUT //Must Mask #define SDRAM_BUS_32BITS to use 16 bits SDRAM width 

/*
* ROM setting
*/
/*#define ROM_SDRAM_SHARE_BUS*/
/*#define ROM_ATA_SHARE_BUS*/



//CD-G related
#define SUPPORT_CDG                 //define it to support CD-G


//#define TVOUT6_4DAC_ON
//#define SUNPLUS_8202P_DEMOBOARD


#ifdef TVOUT6_4DAC_ON
#define TV_USE_4_DAC
#endif

#define TV_USE_4_DAC         //8202S need open always. 4 video DAC.
/*#define SCART_TV_216_USE_PIN55_65_66
#ifdef SCART_TV_216_USE_PIN55_65_66
    #define HI_CTRL_SCART_TO_RGB
    #define LOW_CTRL_TO_RELEASE_SCART
	//#define HI_CTRL_TO_RELEASE_SCART
    #define LOW_CTRL_SCART_TO_DISPLAY_16B9
    //#define HI_CTRL_SCART_TO_DISPLAY_16B9
#endif//SCART_TV_256_USE_PIN226_227_228
*/
//#define SCART_TV_216_USE_PIN55_65_66  // FanGang added for 8202s-16-SY-216-0-D scart control 2005/01/17
#ifdef SCART_TV_216_USE_PIN55_65_66
#define HI_CTRL_SCART_TO_RGB
//#define LOW_CTRL_SCART_TO_RGB
//#define HI_CTRL_TO_RELEASE_SCART
#define LOW_CTRL_TO_RELEASE_SCART
//#define HI_CTRL_SCART_TO_DISPLAY_16B9
#define LOW_CTRL_SCART_TO_DISPLAY_16B9
#endif



//#define SCART_TV                  //define it if we support SCART TV, use GPIO-37-38-39 to control
//#define ORI_SCART_TV
//#define SCART_TV_2                //define pin151---SCART_DISPLAY; pin163---SCART_SIG  wanghaoying
//#define AUTO_ADJUST_TV_TYPE         //auto adjust tv type (16:9 ,4:3LB,4:3PS) from disc  //lijd 2004-9-15 13:25
//C/F Card setting
//#define SUPPORT_CARD_STORAGE      //Jeff 20020725
//#define CARD_MASTER                 //if you don't connect DVD-ROM, define SUPPORT_CARD_STORAGE+CARD_ONLY
//#define CARD_HOT_PLUG             //2002/11/8 kenny define for new reset(GPIO-17) scheme for card detect(GPIO-18)

//Upgrade setting
#define UPGRADE_FILE_NAME   {"DVDROM.BIN"}
//#define SUPPORT_UART_UPGRADE      //Upgrade flash via UART, Robert 020603
#define RESET_AFTER_UPGRADE         //reset 8200 and tray out after smart upgrade
//#define UPGRADE_TRAYOUT               //joshua 2004/07/13 tray out when dvdrom.bin have been moved to sdram

#ifndef SDRAM_16Mb_Mode
//#define SUPPORT_NESGAME
//#define DVD_AUDIO
#endif

#ifdef  SUPPORT_NESGAME   //for VFD pannel key valid in PLAY game state  2004-7-2 15:16 lijd
//#define SUPPORT_IR_GAME
#define VFDKEYBUFADDR      0x588 
#endif

//audio DAC settings, chose one
//6 channel audio DAC

//#define WM8746I2S24               //(format:I2S24)

//#define WM8746                      //(format:RJ24)WM8766 is pin-2-pin compatible

//#define WM8736                    //for AUDIO DAC WM8736 or DA1196 6 chanell
//#define AV2188
//#define CS4228
#define CE2746
//2 channel audio DAC
//#define WM8726RJ16
//#define WM8746I2S24
//#define WM8720                    //use GPIO-17 as AUDIO_RST
//#define CS4334DAC
//#define PCM1742
//#define PCM1606
//#define PCM1720
//#define PCM1723

//Audio channel connector(RCA connector)setting, Jeff 20020520
//We assign connectors to the following index, Lm(0), Rm(1), L(2), R(3), Ls(4), Rs(5), C(6), SFE(7)
//2-3-4-5-6-7 map to DAC OUT0L-OUT0R-OUT1L-OUT1R-OUT2L-OUT2R
/*#define DACOUTLm        0
#define DACOUTRm        1
#define DACOUT0L        2
#define DACOUT0R        3
#define DACOUT1L        4
#define DACOUT1R        5
#define DACOUT2L        6
#define DACOUT2R        7
*/
#define DACOUTLm        6
#define DACOUTRm        7
#define DACOUT0L        4
#define DACOUT0R        5
#define DACOUT1L        2
#define DACOUT1R        3
#define DACOUT2L        0
#define DACOUT2R        1

#define DAC_INVERT      1           //dac polarity 0 (untouch) or 1 (inverted)


#define SUPPORT_DSPMUTE        // benson add for dsp mute function 2004/07/12
#define CD_INIT_DNOT_MUTE


//#define USE_SBA1_AS_GPIO_MUTE//for 8200-32-sy-0-c GPIO MUTE nono 2004-10-15 18:25
#ifdef USE_SBA1_AS_GPIO_MUTE
#define LOW_MUTE
#endif     


//IR setting
//#define IR_INTECH_8202
//#define IR_JX2002
//#define IR_JR2022
#define IR_INTECH_816
//#define IR_KM308
//#define IR44                        // for new SUNPLUS remote controller
#define IR_PLAY_RESUME
//#define IR_PLAY_RESUME_PAUSE

//#define ADJUSTING_ACTION_VALID_RIGHT_NOW
//#define NEXT_FORWARD_IN_A_KEY
//#define IR5                         //"ircode_N700.h"
//======================================================================
//#define RISC_ALIVE_STANDBY        //power on by RISC on standby lijd  2004-9-28 17:33, 2004/10/01 yltseng
//======================================================================
#define IR_10_PLUS
//#define IR_NO_REPEAT              //disable repeat, when we keep to press one button, Jeff 20020924
//#define USE_VFD_LED_POWER         //use VFD LED to indicate power mode

//VFD setting
//#define INTECH_DVD_PANNEL
//#define INTECH_DVD_PANNEL_3988
//#define INTECH_DVD_PANNEL_2313
//#define INTECH_DVD120_PANNEL
//#define CHENGXIN_RD602D_PANNEL
//#define CHENGXIN_RD604_PANNEL
//#define CHENGXIN_RD596_PANNEL
//#define CHENGXIN_228B_PANNEL
#define INTECH_DVD_PANNEL_816
//#define TONGFANG_PANEL
//#define GENERAL_PANNEL              //for most 16312 VFD pannel.2-7-4 13:41
//#define GENERAL_HT1621_PANNEL              //for most HT1621 VFD pannel.2004-5-9 18:44 lijd
#ifdef GENERAL_HT1621_PANNEL
#define HT1621_PANNEL
#endif//GENERAL_HT1621_PANNEL
//#define AD7312_PANNEL              //2004-5-18 16:19 lijd
//#define CONSER_DVD288_PANNEL
//#define N701_PANNEL               //NINTAUS DVD-N701 PANNEL
//#define SM1623_DRIVER_VFD     //for SM1623 driver vfd      add 2003/10/11
//#define HC164_PANNEL
//#define GT1128_PANNEL         //for GT1128 driver 2004-7-21 11:13 lijd
///OSD language related settings(don't change the sequence)
#define USE_ENGLISH_OSD             //LCD_EN
#define USE_SCHINESE_OSD            //LCD_ZH
//#define USE_TCHINESE_OSD            //LCD_ZH
//#define USE_GERMAN_OSD              //LCD_DE
//#define USE_SPANISH_OSD             //LCD_ES
//#define USE_FRENCH_OSD              //LCD_FR