cfg_sunplus_stb.h

Sunplus 8202S source code.

#define VERSION_STRING        "SUNP1.00"   //max string size 8 characters

//---------------------
//board parts settings
//---------------------
//SDRAM settings(bus width, default is 16-bits mode)
#define SDRAM_BUS_32BITS        //define it to use 32 bits SDRAM Bus width

#define FUNC_DVB

#define USE_DEFAULT_CLOCK		//define it to use default clock(108MHz), otherwise 121.5MHz

#ifndef USE_DEFAULT_CLOCK
	#define F121_5	//if we not define USE_DEFAULT_CLOCK, we will use 121.5MHz system clock
#endif

//#define SDRAM_16Mb_Mode       //only use 16Mb*1 SDRAM

/*
* Define Disc detect polling time
*/
#define DETECT_TIMES	0xff
#define NO_DISC_TIMES	30

/*
*  Video seting
*/
#define PC_VGA_OUT
/*#define TV_YUV_OUT*/
/*#define S_VIDEO_OUT*/

/*DVB setup*/   //xsyan 2004-6-9
//#define DVB_SETUP	//MIKEY 2004.06.25
#ifdef DVB_SETUP
//#define VOLUME_RECODE
//#define	ADDR_I2C_VOLUME	102
//#define CNTR_5SPK_VOLUME
#define SUPPORT_DVD_OSD
#define SUPPORT_PROLOGIC_II
#define SSAVER_DEFAULT_OFF
#define SHUANGHAN
#endif

/*
* ROM setting
*/
/*#define ROM_SDRAM_SHARE_BUS*/
#define ROM_PCI_SHARE_BUS



//CD-G related
//#define SUPPORT_CDG                 //define it to support CD-G

#define TVOUT6_4DAC_ON		//xsyan unmask 20040628
#ifdef TVOUT6_4DAC_ON
#define TV_USE_4_DAC
#endif

//#define TV_USE_4_DAC
//#define SCART_TV                  //define it if we support SCART TV, use GPIO-37-38-39 to control
//#define ORI_SCART_TV
//#define SCART_TV_2				//define pin151---SCART_DISPLAY; pin163---SCART_SIG  wanghaoying

//C/F Card setting
//#define SUPPORT_CARD_STORAGE      //Jeff 20020725
//#define CARD_MASTER                 //if you don't connect DVD-ROM, define SUPPORT_CARD_STORAGE+CARD_ONLY
//#define CARD_HOT_PLUG             //2002/11/8 kenny define for new reset(GPIO-17) scheme for card detect(GPIO-18)

//Upgrade setting
#define UPGRADE_FILE_NAME	{"DVDROM.BIN"}



#ifndef SDRAM_16Mb_Mode
//#define SUPPORT_NESGAME
//#define DVD_AUDIO
#endif


//audio DAC settings, chose one
//6 channel audio DAC
#define USE_DAC_RJ24        //(default setting)
//#define USE_DAC_RJ16
//#define USE_DAC_I2S24
//#define USE_DAC_I2S16
//#define USE_DAC_LJ24
//#define USE_DAC_LJ16

//Audio channel connector(RCA connector)setting, Jeff 20020520
//We assign connectors to the following index, Lm(0), Rm(1), L(2), R(3), Ls(4), Rs(5), C(6), SFE(7)
//2-3-4-5-6-7 map to DAC OUT0L-OUT0R-OUT1L-OUT1R-OUT2L-OUT2R
#define	SPHE1000_6DAC	//MIKEY 2004.07.06
#ifndef SPHE1000_6DAC
#define DACOUTLm        0
#define DACOUTRm        1
#define DACOUT0L        2
#define DACOUT0R        3
#define DACOUT1L        4
#define DACOUT1R        5
#define DACOUT2L        6
#define DACOUT2R        7
#else
#define DACOUTLm        6
#define DACOUTRm        7
#define DACOUT0L        0
#define DACOUT0R        1
#define DACOUT1L        2
#define DACOUT1R        3
#define DACOUT2L        4
#define DACOUT2R        5
#endif //SPHE1000_6DAC

#define DAC_INVERT      1           //dac polarity 0 (untouch) or 1 (inverted)

//#define USE_A19_AS_GPIO_MUTE

//IR setting

#define IR44                        // for new SUNPLUS remote controller
#define IR_PLAY_RESUME			//wjzhang umask
#define IR_PLAY_RESUME_PAUSE	//wjzhang umask

//#define ADJUSTING_ACTION_VALID_RIGHT_NOW
//#define NEXT_FORWARD_IN_A_KEY
//#define IR5                         //"ircode_N700.h"


#define IR_10_PLUS
//#define IR_NO_REPEAT              //disable repeat, when we keep to press one button, Jeff 20020924
//#define USE_VFD_LED_POWER         //use VFD LED to indicate power mode

//VFD setting
#define GENERAL_PANNEL              //for most VFD pannel.2-7-4 13:41
//#define CONSER_DVD288_PANNEL
//#define N701_PANNEL               //NINTAUS DVD-N701 PANNEL
//#define SM1623_DRIVER_VFD  	//for SM1623 driver vfd      add 2003/10/11
//#define HC164_PANNEL
///OSD language related settings(don't change the sequence)
#define USE_ENGLISH_OSD             //LCD_EN
#define USE_SCHINESE_OSD            //LCD_ZH
//#define USE_TCHINESE_OSD            //LCD_ZH
#define USE_GERMAN_OSD              //LCD_DE
#define USE_SPANISH_OSD             //LCD_ES
#define USE_FRENCH_OSD              //LCD_FR
#define USE_PORTUGUESE_OSD          //LCD_PT
//#define USE_LATIN_OSD               //LCD_LA
//#define USE_ITALIAN_OSD             //LCD_IT
//#define USE_JAPANESE_OSD            //LCD_JA
//#define USE_RUSSIAN_OSD             //LCD_RU
//#define USE_ROMANIAN_OSD             //LCD_RO
//#define USE_TURKISH_OSD             //LCD_TR
//#define USE_DUTCH_OSD               //LCD_NL
//#define USE_SWEDISH_OSD             //LCD_SV
//#define USE_CZECH_OSD               //LCD_CS

#define OSDISP		//wjzhang the osd display in stb-dvd  wjzhang 2004/10/14
//#define VFD_DISP		//wjzhang for the vfd&display button
//#define OSDISP_DBG 				

#define DEFAULT_OSD_LANG            0
#ifdef SDRAM_16Mb_Mode
#define N_OSD_LANGS                 2
#define OSD_LAGN_SETUP_STRING       LCD_EN,LCD_PT,0,0,0,0,0,0
#define OSD_LANG_SETUP_MAP          {0,		1,     0,     0,     0,      0, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#else
#define N_OSD_LANGS                 6//8//3
#define OSD_LAGN_SETUP_STRING       LCD_EN,LCD_ZH,LCD_DE,LCD_ES,LCD_FR,LCD_PT,0,0
#define OSD_LANG_SETUP_MAP          {0,		1,     2,     3,     4,      5, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#endif

#define OSD_TIMEOUT                 200
#define OSD_SCREEN_SAVER			//define MIKEY 2004.06.25 for OSD crash
#define SSAVER_DEFAULT_OFF			//MIKEY 2004.07.15 default off, can turn on by setup menu

#define REGION_NUM                  0       //set default region:0->all rigion;1~6->REGION 1~6.

#define SUPER_PASSWORD              {IRC_9,IRC_7,IRC_3,IRC_5}   //define super password when open tray
#define DEFAULT_PASSWORD            0000                        //Jeff 20020703
#define USER_SUPER_PASSWORD         0000                       //NONO 3-6-17 14:31


#define DEFAULT_AUDIO_LANG          2   //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_AUDIO_LAGN_SETUP_STRING     LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_LA, LCD_DE

#define DEFAULT_SUBT_LANG           2   //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:off
#define OSD_SUBT_LAGN_SETUP_STRING     LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, STR_OS_OFF

#define DEFAULT_MENU_LANG       2      //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_MENU_LAGN_SETUP_STRING     LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, LCD_LA

#define DEFAULT_TV_SYS              0       //0:NTSC, 1:PAL60, 2:PAL, 3:AUTO
//#define TV_SYS_SETUP_STRING     	STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_PALM, STR_OS_PALN, STR_OS_PALNc, STR_OS_AUTO, 0
#define TV_SYS_SETUP_STRING     	STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_AUTO, 0, 0, 0

#ifdef TV_USE_4_DAC
#define MODE_MAX_PSCAN 0x05
#else
#define MODE_MAX_PSCAN 0x04
#endif

#ifdef PC_VGA_OUT
   #ifdef TV_USE_4_DAC
   #define VIDEO_SETUP_STRING     		STR_OS_PC_VGA,STR_OS_P_SCAN_YUV,STR_OS_YCbCr,STR_OS_TV_RGB, STR_OS_S_VIDEO, 0,0
   #define VIDEO_SET_MODE				PC_VGA,       P_SCAN,           INTERLACE,	 TV_RGB,	       TV_SVIDEO
   #else
   #define VIDEO_SETUP_STRING     		STR_OS_PC_VGA,STR_OS_P_SCAN_YUV,STR_OS_YCbCr,STR_OS_TV_RGB, 0, 0,0
   #define VIDEO_SET_MODE				PC_VGA,       P_SCAN,           INTERLACE,	 TV_RGB
   #endif
#elif defined(TV_YUV_OUT)
   #ifdef TV_USE_4_DAC
   #define VIDEO_SETUP_STRING     		STR_OS_P_SCAN_YUV,STR_OS_PC_VGA,STR_OS_YCbCr,STR_OS_TV_RGB, STR_OS_S_VIDEO, 0,0
   #define VIDEO_SET_MODE				P_SCAN,           PC_VGA,       INTERLACE,	 TV_RGB,	       TV_SVIDEO
   #else
   #define VIDEO_SETUP_STRING     		STR_OS_P_SCAN_YUV,STR_OS_PC_VGA,STR_OS_YCbCr,STR_OS_TV_RGB, 0, 0,0
   #define VIDEO_SET_MODE				P_SCAN,           PC_VGA,       INTERLACE,	 TV_RGB
   #endif
#elif defined(S_VIDEO_OUT)
   #ifdef TV_USE_4_DAC
   #define VIDEO_SETUP_STRING     		STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,STR_OS_PC_VGA, STR_OS_S_VIDEO, 0,0
   #define VIDEO_SET_MODE				INTERLACE,	 TV_RGB,	   P_SCAN,           PC_VGA,        TV_SVIDEO
   #else
   #define VIDEO_SETUP_STRING     		STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,STR_OS_PC_VGA, 0, 0,0
   #define VIDEO_SET_MODE				INTERLACE,	 TV_RGB,	   P_SCAN,           PC_VGA
   #endif
#endif

#define SETUP_ALL_VALID             //define it to let SETUP MENU is always valid, Jeff 20021023
//#define SETUP_DONT_PAUSE                // define it to continue play when SETUP, alan 3-8-5 17:48

//#define NEW_SEARCH_OSD              //new search OSD function, using up/down to switch selection

//#define RATING_8                  //if we define it, there are 8 ratings, 1/2/3/../8, otherwise, 3 ratings, Jeff 20020723

//#define TWO_CHANNEL_ONLY          //define it to output two channel audio only, mark it for 5.1 channel, Jeff 20020819

//#define NO_MIC                    //if use it,about MIC item will be gray and can't be selected.
//#define NO_DTS_OUTPUT             //define it when we don't support DTS audio output


//idle time to wake up screen saver
#define SAFE_WAIT_TIME              (1* 60 * 100)      //x second

#ifndef SDRAM_16Mb_Mode
#define SUPPORT_FILE_SYSTEM_MODE  //use MP3 menu to play all we support files(e.g. .dat .vob ...)
#define SUPPORT_PLAYBACK_ICON       // display osd playback icons
#endif
//#define MP3_DIRECT_SELECT         //select file item all disc, panxing,2002-4-8
//#define MP3_CD_FF1_BF1_MUTE       //FF*2 and BF*2 mute

#define JPEG_EXT2FULL             //extend JPEG to full screen
#define JPGExtMaxMultiple         2               //max. ext multiple=JPGExtMaxMultiple * JPGExtMaxMultiple
#define JPG_EFFECT   //David Add 3-6-26 17:12
#define JPEG_SLIDE_TIME             (3*100)         //JPEG slide show hold time, x second
#ifndef SDRAM_16Mb_Mode
#define JPEG_THUMBNAIL_MENU         //enable JPEG thumbnail menu
//#define JPEG_PREFETCH               //pre-fetch JPEG file and decode when we select someone file
#endif


//#define AUDIO_SHOW_SAVER                          //MP3 or CDDA play will show screen-saver when idle > 10 seconds, Jeff 20020815
//#define SLEEP_WHEN_POWER_ON                       //system enter sleep mode when power-on, Jeff 20020922

#ifndef SDRAM_16Mb_Mode //terry,de-mark,2003/8/2 11:49AM
#define SUPPORT_DVD_3D                              //SUPPORT_DVD_3D defined only to enable DOWNMIX SWITCH
#define DVD_3D_SHOW_SPECTRUM                        //SUPPORT_DVD_3D+DVD_3D_SHOW_SPECTRUM : to show spectrum(not include LPCM)
//#define SUPPORT_DVD_3D_EFFECT//for two channel, DVD can use 3Dsound.
#endif

//#define VOB_SUBTITLE	// support vob file to change subtitle and language

#define SUPPORT_WMA

//#define SUPPORT_AAC

#define SPDIF_REAL_OFF                              //close SPDIF clock when not in SPDIF mode, Jeff 20020920

#define AC3_BASS_MANAGEMENT                         //AC3 Bass Management

//#define SPDIF_PLUS_ANALOG                           //define it when we output SPDIF/PCM+Analog simultaneous, Jeff 20021029
#define USE_FREQ_MASK

#define MIC_THRESHOLD               0x30            //default:0x30, (0x20 ~ 0xa0)
#define MIC_PRESENSITIVITY          0x1a            //MIC turn-on sense time(unit: 32/44100 sec, only for (S)VCD/MP3)
#define MIC_AFTERSENSITIVITY        0x0903          //MIC turn-off sense time(units:1/3 seconds, Hi-auto, Lo-MIC(unused))
#define ECHO_DECAY_INIT             0x05            //ECHO decay model(1~8), hi:intensity

#define RESET_AFTER_UPGRADE         //reset 8200 and tray out after smart upgrade
#define SUPPORT_VIDEO_BUFFER_STANDBY //kenny 2003/5/13
//#define SUPPORT_EXTERNAL_MIC //kenny 2003/5/14

#ifdef SUPPORT_VIDEO_BUFFER_STANDBY

#define STANDBY_GPIO 52
#endif

#ifdef SUPPORT_EXTERNAL_MIC

#define EXTERN_MIC_DECT     57
#define EXTERN_MIC_MUTE     18

#endif

//#define SUPPORT_UART_UPGRADE      //Upgrade flash via UART, Robert 020603
//#define SUPPORT_UART_COMMAND      //Support UART to communicate with external MCU //KENNY 2002/7/16


//#define RCD_GPIO_CONTROL          //alan 2002/11/14 05:06