📄 cfg_customers_portable.h
字号:
#define VERSION_STRING "SLM-000" //version: xxx-yyy, 20030422
//---------------------
//IC settings
//---------------------
//#define IC_8202E
//---------------------
//board parts settings
//---------------------
//SDRAM settings(bus width, default is 16-bits mode)
//#define SDRAM_BUS_32BITS//portable use 16 bit//define it to use 32 bits SDRAM Bus width
#define DVD_SETUP_REENG//8210 V2.06
#define SETUP_CAN_DIRECT_SEL_SUBTITLE//8210 V2.06
#define SETUP_CAN_DIRECT_SEL_AUDIO_LANG//8210 V2.06
// 2004/10/16 yltseng, with this define enabled, osd color palettes are affected by brightness and
// contrast in setup menu
//#define OSD_COLOR_ADJUST_BY_BRIGHTNESS_AND_CONTRAST
//#define SDRAM_16Mb_Mode //only use 16Mb*1 SDRAM
/*
* Define Disc detect polling time
*/
#define DETECT_TIMES 0xff
#define NO_DISC_TIMES 30
//#define SUPPORT_CD_TEXT
#ifdef SUPPORT_CD_TEXT
#define OSD_FONT_API
#endif
/*
* Video seting
*/
/*#define PC_VGA_OUT*/
/*#define TV_YUV_OUT*/
#define S_VIDEO_OUT
//#define DIGITAL_VIDEO_OUT //Must Mask #define SDRAM_BUS_32BITS to use 16 bits SDRAM width
//#define PNGPIO_CON_TFT
#ifdef DIGITAL_VIDEO_OUT
#define CCIR656_TYPE1 //CCIR656 Out from Pin225~233(8202A 256pin),Pin55~66(216pin)
//#define CCIR656_TYPE2 //CCIR656 Out from Pin164~172,193(8202A 256pin)
#endif
/*
* ROM setting
*/
/*#define ROM_SDRAM_SHARE_BUS*/
/*#define ROM_ATA_SHARE_BUS*/
//CD-G related
#define SUPPORT_CDG //define it to support CD-G
#define TVOUT6_4DAC_ON//portable use
//#define SUNPLUS_8202P_DEMOBOARD
#ifdef TVOUT6_4DAC_ON
#define TV_USE_4_DAC
#endif
//#define TV_USE_4_DAC
//#define SCART_TV //define it if we support SCART TV, use GPIO-37-38-39 to control
//#define ORI_SCART_TV
//#define SCART_TV_2 //define pin151---SCART_DISPLAY; pin163---SCART_SIG wanghaoying
//#define AUTO_ADJUST_TV_TYPE //auto adjust tv type (16:9 ,4:3LB,4:3PS) from disc //lijd 2004-9-15 13:25
//C/F Card setting
//#define SUPPORT_CARD_STORAGE //Jeff 20020725
//#define CARD_MASTER //if you don't connect DVD-ROM, define SUPPORT_CARD_STORAGE+CARD_ONLY
//#define CARD_HOT_PLUG //2002/11/8 kenny define for new reset(GPIO-17) scheme for card detect(GPIO-18)
//Upgrade setting
#define UPGRADE_FILE_NAME {"DVDROM.BIN"}
//#define SUPPORT_UART_UPGRADE //Upgrade flash via UART, Robert 020603
#define RESET_AFTER_UPGRADE //reset 8200 and tray out after smart upgrade
//#define UPGRADE_TRAYOUT //joshua 2004/07/13 tray out when dvdrom.bin have been moved to sdram
#ifndef SDRAM_16Mb_Mode
//#define SUPPORT_NESGAME
//#define DVD_AUDIO//8210 V2.08 prepare
#endif
#ifdef SUPPORT_NESGAME
//#define SUPPORT_IR_GAME
#define VFDKEYBUFADDR 0x588
#endif
//audio DAC settings, chose one
//6 channel audio DAC
#if defined(SPHE8202)||defined(CUSTOMERS_PORTABLE_DVD)
#define WM8746I2S24 //(format:I2S24)
#else
#define WM8746 //(format:RJ24)WM8766 is pin-2-pin compatible
#endif
//#define WM8736 //for AUDIO DAC WM8736 or DA1196 6 chanell
//#define AV2188
//#define CS4228
//2 channel audio DAC
//#define WM8726RJ16
//#define WM8746I2S24
//#define WM8720 //use GPIO-17 as AUDIO_RST
//#define CS4334DAC
//#define PCM1742
//#define PCM1606
//#define PCM1720
//#define PCM1723
//Audio channel connector(RCA connector)setting, Jeff 20020520
//We assign connectors to the following index, Lm(0), Rm(1), L(2), R(3), Ls(4), Rs(5), C(6), SFE(7)
//2-3-4-5-6-7 map to DAC OUT0L-OUT0R-OUT1L-OUT1R-OUT2L-OUT2R
#define DACOUTLm 0
#define DACOUTRm 1
#define DACOUT0L 2
#define DACOUT0R 3
#define DACOUT1L 4
#define DACOUT1R 5
#define DACOUT2L 6
#define DACOUT2R 7
#define DAC_INVERT 1 //dac polarity 0 (untouch) or 1 (inverted)
#define SUPPORT_DSPMUTE // benson add for dsp mute function 2004/07/12
#define CD_INIT_DNOT_MUTE
//IR setting
//#define IR200 // for new SUNPLUS remote controller 2004-10-22 15:38, felix
#define IR44 // for new SUNPLUS remote controller
#define IR_PLAY_RESUME
#define IR_PLAY_RESUME_PAUSE
//#define SUPPORT_EX_IR
//#define HOLD_KEY_DETECT
//#define ADJUSTING_ACTION_VALID_RIGHT_NOW
//#define NEXT_FORWARD_IN_A_KEY
//#define IR5 //"ircode_N700.h"
//======================================================================
//#define RISC_ALIVE_STANDBY //power on by RISC on standby lijd 2004-9-28 17:33, 2004/10/01 yltseng
//======================================================================
#define IR_10_PLUS
//#define IR_NO_REPEAT //disable repeat, when we keep to press one button, Jeff 20020924
//#define USE_VFD_LED_POWER //use VFD LED to indicate power mode
//VFD setting
#define GENERAL_PANNEL //for most 16312 VFD pannel.2-7-4 13:41
//#define GENERAL_HT1621_PANNEL //for most HT1621 VFD pannel.2004-5-9 18:44 lijd
#ifdef GENERAL_HT1621_PANNEL
#define HT1621_PANNEL
#endif//GENERAL_HT1621_PANNEL
//#define AD7312_PANNEL //2004-5-18 16:19 lijd
//#define CONSER_DVD288_PANNEL
//#define N701_PANNEL //NINTAUS DVD-N701 PANNEL
//#define SM1623_DRIVER_VFD //for SM1623 driver vfd add 2003/10/11
//#define HC164_PANNEL
//#define GT1128_PANNEL //for GT1128 driver 2004-7-21 11:13 lijd
//#define TP6317_PANNEL //yaowh add for complete standby 04-10-25
///OSD language related settings(don't change the sequence)
#define USE_ENGLISH_OSD //LCD_EN
#define USE_SCHINESE_OSD //LCD_ZH
//#define USE_TCHINESE_OSD //LCD_ZH
#define USE_GERMAN_OSD //LCD_DE
#define USE_SPANISH_OSD //LCD_ES
#define USE_FRENCH_OSD //LCD_FR
#define USE_PORTUGUESE_OSD //LCD_PT
//#define USE_LATIN_OSD //LCD_LA
//#define USE_ITALIAN_OSD //LCD_IT
//#define USE_JAPANESE_OSD //LCD_JA
//#define USE_RUSSIAN_OSD //LCD_RU
//#define USE_ROMANIAN_OSD //LCD_RO
//#define USE_TURKISH_OSD //LCD_TR
//#define USE_DUTCH_OSD //LCD_NL
//#define USE_SWEDISH_OSD //LCD_SV
//#define USE_CZECH_OSD //LCD_CS
//#define USE_THAI_OSD //LCD_TH
//#define USE_HUNGARIAN_OSD //LCD_HU
//#define USE_ARABIC_OSD //LCD_AR
//#define USE_GREECE_OSD //LCD_EL
#define DEFAULT_OSD_LANG 0
#ifdef SDRAM_16Mb_Mode
#define N_OSD_LANGS 2
#define OSD_LAGN_SETUP_STRING LCD_EN,LCD_PT,0,0,0,0,0,0
#define OSD_LANG_SETUP_MAP {0, 1, 0, 0, 0, 0, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#else
#define N_OSD_LANGS 6//8//3
#define OSD_LAGN_SETUP_STRING LCD_EN,LCD_ZH,LCD_DE,LCD_ES,LCD_FR,LCD_PT,0,0
#define OSD_LANG_SETUP_MAP {0, 1, 2, 3, 4, 5, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#endif
#define OSD_TIMEOUT 200
#define OSD_SCREEN_SAVER
#define REGION_NUM 0 //set default region:0->all rigion;1~6->REGION 1~6.
#define SUPER_PASSWORD {IRC_9,IRC_7,IRC_3,IRC_5} //define super password when open tray
#define DEFAULT_PASSWORD 0000 //Jeff 20020703
#define USER_SUPER_PASSWORD 0000 //NONO 3-6-17 14:31
#define DEFAULT_AUDIO_LANG 2 //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_AUDIO_LAGN_SETUP_STRING LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_LA, LCD_DE
#define DEFAULT_SUBT_LANG 2 //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:off
#define OSD_SUBT_LAGN_SETUP_STRING LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, STR_OS_OFF
#define DEFAULT_MENU_LANG 2 //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_MENU_LAGN_SETUP_STRING LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, LCD_LA
#define DEFAULT_TV_SYS 0 //0:NTSC, 1:PAL60, 2:PAL, 3:AUTO
//#define TV_SYS_SETUP_STRING STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_PALM, STR_OS_PALN, STR_OS_PALNc, STR_OS_AUTO, 0
#define TV_SYS_SETUP_STRING STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_AUTO, 0, 0, 0
#ifdef TV_USE_4_DAC
#define MODE_MAX_PSCAN 0x05
#else
#define MODE_MAX_PSCAN 0x04
#endif
#ifdef PC_VGA_OUT
#ifdef TV_USE_4_DAC
#define VIDEO_SETUP_STRING STR_OS_PC_VGA,STR_OS_P_SCAN_YUV,STR_OS_YCbCr,STR_OS_TV_RGB, STR_OS_S_VIDEO, 0,0
#define VIDEO_SET_MODE PC_VGA, P_SCAN, INTERLACE, TV_RGB, TV_SVIDEO
#else
#define VIDEO_SETUP_STRING STR_OS_PC_VGA,STR_OS_P_SCAN_YUV,STR_OS_YCbCr,STR_OS_TV_RGB, 0, 0,0
#define VIDEO_SET_MODE PC_VGA, P_SCAN, INTERLACE, TV_RGB
#endif
#elif defined(TV_YUV_OUT)
#ifdef TV_USE_4_DAC
#define VIDEO_SETUP_STRING STR_OS_P_SCAN_YUV,STR_OS_PC_VGA,STR_OS_YCbCr,STR_OS_TV_RGB, STR_OS_S_VIDEO, 0,0
#define VIDEO_SET_MODE P_SCAN, PC_VGA, INTERLACE, TV_RGB, TV_SVIDEO
#else
#define VIDEO_SETUP_STRING STR_OS_P_SCAN_YUV,STR_OS_PC_VGA,STR_OS_YCbCr,STR_OS_TV_RGB, 0, 0,0
#define VIDEO_SET_MODE P_SCAN, PC_VGA, INTERLACE, TV_RGB
#endif
#elif defined(S_VIDEO_OUT)
#ifdef TV_USE_4_DAC
#define VIDEO_SETUP_STRING STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,STR_OS_PC_VGA, STR_OS_S_VIDEO, 0,0
#define VIDEO_SET_MODE INTERLACE, TV_RGB, P_SCAN, PC_VGA, TV_SVIDEO
#else
#define VIDEO_SETUP_STRING STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,STR_OS_PC_VGA, 0, 0,0
#define VIDEO_SET_MODE INTERLACE, TV_RGB, P_SCAN, PC_VGA
#endif
#endif
#define SETUP_ALL_VALID //define it to let SETUP MENU is always valid, Jeff 20021023
//#define SETUP_DONT_PAUSE // define it to continue play when SETUP, alan 3-8-5 17:48
//#define NEW_SEARCH_OSD //new search OSD function, using up/down to switch selection
//#define RATING_8 //if we define it, there are 8 ratings, 1/2/3/../8, otherwise, 3 ratings, Jeff 20020723
#define TWO_CHANNEL_ONLY//portable use //define it to output two channel audio only, mark it for 5.1 channel, Jeff 20020819
//#define NO_MIC //if use it,about MIC item will be gray and can't be selected.
//#define SUPPORT_EXT_AD_SHOW_MIC_AUTO_SING // #define it to let extern AD achieve AUTO sing
#ifdef SUPPORT_EXT_AD_SHOW_MIC_AUTO_SING
#define NO_MIC //if use it,about MIC item will be gray and can't be selected.
#define NO_MIC_ITEM_ENABLE_MIC
#define NOT_SHOW_MIC_SETUP_DAFAULT_AUTO
#endif
#define NO_DTS_OUTPUT //define it when we don't support DTS audio output
#ifdef NO_DTS_OUTPUT
//#define FORCE_NO_DTS_OUTPUT //define it when we don't support DTS audio output, but load DTS dsp_code.
#endif
//idle time to wake up screen saver
#define SAFE_WAIT_TIME (3* 60 * 100) //x second
#ifndef SDRAM_16Mb_Mode
#define SUPPORT_FILE_SYSTEM_MODE //use MP3 menu to play all we support files(e.g. .dat .vob ...)
#define SUPPORT_PLAYBACK_ICON // display osd playback icons
#endif
#ifdef SDRAM_16Mb_Mode
#ifdef SUPPORT_FILE_SYSTEM_MODE
#undef TWO_CHANNEL_ONLY
#endif
#endif
//#define MP3_DIRECT_SELECT //select file item all disc, panxing,2002-4-8
//#define MP3_CD_FF1_BF1_MUTE //FF*2 and BF*2 mute
//li mao add 2004-5-12 10:02
//#define NO_DISPLAY_CDROM_ICON
//#define MP3_BK_GROUND_BLACK;
//#define MP3_BK_GROUND_GREEN;
//#define MP3_BK_GROUND_AQUA;
#define JPEG_EXT2FULL //extend JPEG to full screen
#define JPGExtMaxMultiple 2 //max. ext multiple=JPGExtMaxMultiple * JPGExtMaxMultiple
#define JPG_EFFECT //David Add 3-6-26 17:12
#define JPEG_SLIDE_TIME (3*100) //JPEG slide show hold time, x second
#ifndef SDRAM_16Mb_Mode
#define JPEG_THUMBNAIL_MENU //enable JPEG thumbnail menu
//#define JPEG_PREFETCH //pre-fetch JPEG file and decode when we select someone file
#endif
//#define AUDIO_SHOW_SAVER //MP3 or CDDA play will show screen-saver when idle > 10 seconds, Jeff 20020815
//#define SLEEP_WHEN_POWER_ON //system enter sleep mode when power-on, Jeff 20020922
#define POWER_RESUME//8210 V2.06
#ifdef SDRAM_16Mb_Mode
//#define SUPPORT_EQ_SDRAM_16Mb
#endif
#ifndef SDRAM_16Mb_Mode //terry,de-mark,2003/8/2 11:49AM
#define SUPPORT_DVD_3D //SUPPORT_DVD_3D defined only to enable DOWNMIX SWITCH
#define DVD_3D_SHOW_SPECTRUM //SUPPORT_DVD_3D+DVD_3D_SHOW_SPECTRUM : to show spectrum(not include LPCM)
//#define SUPPORT_DVD_3D_EFFECT//for two channel, DVD can use 3Dsound.
//to remember 3D sound,;yanlb add,2004/07/06
//#define REMB_3DSOUND //Make sure:SUPPORT_3DSOUND defined
#endif
#define SUPPORT_WMA//8210 v2.08 prepare
//#define SUPPORT_JOLIET_FORMAT
//#define SUPPORT_FS_LONGNAME
#define SPDIF_REAL_OFF //close SPDIF clock when not in SPDIF mode, Jeff 20020920
#define AC3_BASS_MANAGEMENT //AC3 Bass Management
//#define SPDIF_PLUS_ANALOG //define it when we output SPDIF/PCM+Analog simultaneous, Jeff 20021029
//#define USE_FREQ_MASK //20041222 nono mark it, because most customers don't neet it.
#define MIC_THRESHOLD 0x30 //default:0x30, (0x20 ~ 0xa0)
#define MIC_PRESENSITIVITY 0x1a //MIC turn-on sense time(unit: 32/44100 sec, only for (S)VCD/MP3)
#define MIC_AFTERSENSITIVITY 0x0903 //MIC turn-off sense time(units:1/3 seconds, Hi-auto, Lo-MIC(unused))
#define ECHO_DECAY_INIT 0x05 //ECHO decay model(1~8), hi:intensity
#define SUPPORT_VIDEO_BUFFER_STANDBY //kenny 2003/5/13
//#define SUPPORT_EXTERNAL_MIC //kenny 2003/5/14
#ifdef SUPPORT_VIDEO_BUFFER_STANDBY
#define STANDBY_GPIO 52
#endif
#ifdef SUPPORT_EXTERNAL_MIC
#define EXTERN_MIC_DECT 57
#define EXTERN_MIC_MUTE 18
#endif
//#define SUPPORT_REP_READ //Maoyong if need test record, unmake next 3 lines
#ifdef SUPPORT_REP_READ
#define NEW_REP_READ //for telling from old read.c, read.h
//#define REP_READ_TEST_RECORD //unmark for test record use IR key1 ~key7
#endif
//#define SUPPORT_UART_UPGRADE //Upgrade flash via UART, Robert 020603
//#define SUPPORT_UART_COMMAND //Support UART to communicate with external MCU //KENNY 2002/7/16
//#define RCD_GPIO_CONTROL //alan 2002/11/14 05:06⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -