serial_config.h

来自「the csi control demo source for the NEC 」· C头文件 代码 · 共 40 行

#include "csi.h"



////////////////////////////////////////////
///          CSI selection               ///
////////////////////////////////////////////

#define CSI_Timing_Mode 		CSI_Timing_Mode1 		// can select mode 2~4
#define CSI_Select_Clk			CSI_Select_Clk1  		// can select clk 2~8
#define CSI_First_Bit			CSI_First_Bit_LSB   		// can select  CSI_First_Bit_MSB
#define CSI_Communication_Mode		CSI_Transmit_And_Receive_Mode 	// can select  CSI_Receive_Mode
#define CSI11_SSI11_Pin_Select		CSI11_SSI11_Pin_Unused  	// can select  CSI11_SSI11_Pin_Used

#define CSI10_ReceiveSize          	0x05 
#define CSI10_SendSize          	0x05 
#define CSI11_ReceiveSize           0x05 
#define CSI11_SendSize          	0x05
   
 unsigned char CSI10_SendDataBuf[CSI10_SendSize]={0x55,0x50,0x05,0x11,0x52};
 unsigned char CSI10_ReceiveDataBuf[CSI10_ReceiveSize];

 unsigned char CSI11_SendDataBuf[CSI11_SendSize]={0x55,0x55,0x55,0x55,0x55};
 unsigned char CSI11_ReceiveDataBuf[CSI11_ReceiveSize];

unsigned char *CSI10_SendBuf = CSI10_SendDataBuf;
unsigned char *CSI10_ReceiveBuf = CSI10_ReceiveDataBuf;
unsigned char *CSI11_SendBuf = CSI11_SendDataBuf;
unsigned char *CSI11_ReceiveBuf = CSI11_ReceiveDataBuf;

unsigned char CSI10_ReceiveCount = CSI10_ReceiveSize;       	 
unsigned char CSI10_SendCount = CSI10_SendSize;       	 
unsigned char CSI11_ReceiveCount = CSI11_ReceiveSize;          	 
unsigned char CSI11_SendCount = CSI11_SendSize;