serial_config.bak

the 232 control demo source for the NEC mcu

#include "uart.h"


 
 
////////////////////////////////////////////
///          UART selection               ///
////////////////////////////////////////////

#define Uart_Parity			Uart_Not_Parity  // can slect other:
                                                            // Uart_Zero_Parity 			
                                                            // Uart_Odd_Parity 			
                                                            // Uart_Even_Parity
#define Uart_Data_Bit			Uart_Data_Bit_8  // can select 7bit
#define Uart_Stop_Bit			Uart_Stop_Bit_2  // can select 1bit

#define Uart0_BaseClk			Uart0_BaseClk_4  // can select:
                                                         //Uart0_BaseClk_1//fxclk0 = TM50 output
                                                         //Uart0_BaseClk_2// fxclk0 = fprs/2
                                                         //Uart0_BaseClk_3// fxclk0 = fprs/8
                                                         //Uart0_BaseClk_4// fxclk0 = fprs/32	
#define Uart0_CounterClk		13          // = fxclk0/8, can select from 8 to 31



#define Uart0_Transmit_Operation()		Uart0_Transmit_Enable() // can select Disable
#define Uart0_Receive_Operation()		Uart0_Receive_Enable() // can select Disable

#define Uart0_ReceiveSize          	0x01 
#define Uart0_SendSize          	0x01 
   
 unsigned char Uart0_SendDataBuf[Uart0_SendSize]={0x55};
 unsigned char Uart0_ReceiveDataBuf[Uart0_ReceiveSize];

 
unsigned char *Uart0_SendBuf = Uart0_SendDataBuf;
unsigned char *Uart0_ReceiveBuf = Uart0_ReceiveDataBuf;


unsigned char Uart0_ReceiveCount = Uart0_ReceiveSize;       	 
unsigned char Uart0_SendCount = Uart0_SendSize;