📄 getsn.cpp
字号:
#include "StdAfx.h"
#include ".\getsn.h"
#include "Iptypes.h"
#include "Iphlpapi.h"
BYTE szSystemInfo[4096]; // 在程序执行完毕后，此处存储取得的系统特征码
UINT uSystemInfoLen = 0; // 在程序执行完毕后，此处存储取得的系统特征码的长度
#define FILE_DEVICE_SCSI 0x0000001b
#define IOCTL_SCSI_MINIPORT_IDENTIFY ( ( FILE_DEVICE_SCSI << 16 ) + 0x0501 )
#define IOCTL_SCSI_MINIPORT 0x0004D008 // see NTDDSCSI.H for definition
#define IDENTIFY_BUFFER_SIZE 512
#define SENDIDLENGTH ( sizeof( SENDCMDOUTPARAMS ) + IDENTIFY_BUFFER_SIZE )
#define IDE_ATAPI_IDENTIFY 0xA1 // Returns ID sector for ATAPI.
#define IDE_ATA_IDENTIFY 0xEC // Returns ID sector for ATA.
#define DFP_RECEIVE_DRIVE_DATA 0x0007c088
typedef struct _IDSECTOR
{
USHORT wGenConfig;
USHORT wNumCyls;
USHORT wReserved;
USHORT wNumHeads;
USHORT wBytesPerTrack;
USHORT wBytesPerSector;
USHORT wSectorsPerTrack;
USHORT wVendorUnique[3];
CHAR sSerialNumber[20];
USHORT wBufferType;
USHORT wBufferSize;
USHORT wECCSize;
CHAR sFirmwareRev[8];
CHAR sModelNumber[40];
USHORT wMoreVendorUnique;
USHORT wDoubleWordIO;
USHORT wCapabilities;
USHORT wReserved1;
USHORT wPIOTiming;
USHORT wDMATiming;
USHORT wBS;
USHORT wNumCurrentCyls;
USHORT wNumCurrentHeads;
USHORT wNumCurrentSectorsPerTrack;
ULONG ulCurrentSectorCapacity;
USHORT wMultSectorStuff;
ULONG ulTotalAddressableSectors;
USHORT wSingleWordDMA;
USHORT wMultiWordDMA;
BYTE bReserved[128];
} IDSECTOR, *PIDSECTOR;
typedef struct _DRIVERSTATUS
{
BYTE bDriverError; // Error code from driver, or 0 if no error.
BYTE bIDEStatus; // Contents of IDE Error reGISter.
// Only valid when bDriverError is SMART_IDE_ERROR.
BYTE bReserved[2]; // Reserved for future expansion.
DWORD dwReserved[2]; // Reserved for future expansion.
} DRIVERSTATUS, *PDRIVERSTATUS, *LPDRIVERSTATUS;
typedef struct _SENDCMDOUTPARAMS
{
DWORD cBufferSize; // Size of bBuffer in bytes
DRIVERSTATUS DriverStatus; // Driver status structure.
BYTE bBuffer[1]; // Buffer of arbitrary length in which to store the data read from the // drive.
} SENDCMDOUTPARAMS, *PSENDCMDOUTPARAMS, *LPSENDCMDOUTPARAMS;
typedef struct _SRB_IO_CONTROL
{
ULONG HeaderLength;
UCHAR Signature[8];
ULONG Timeout;
ULONG ControlCode;
ULONG ReturnCode;
ULONG Length;
} SRB_IO_CONTROL, *PSRB_IO_CONTROL;
typedef struct _IDEREGS
{
BYTE bFeaturesReg; // Used for specifying SMART "commands".
BYTE bSectorCountReg; // IDE sector count register
BYTE bSectorNumberReg; // IDE sector number register
BYTE bCylLowReg; // IDE low order cylinder value
BYTE bCylHighReg; // IDE high order cylinder value
BYTE bDriveHeadReg; // IDE drive/head register
BYTE bCommandReg; // Actual IDE command.
BYTE bReserved; // reserved for future use. Must be zero.
} IDEREGS, *PIDEREGS, *LPIDEREGS;
typedef struct _SENDCMDINPARAMS
{
DWORD cBufferSize; // Buffer size in bytes
IDEREGS irDriveRegs; // Structure with drive register values.
BYTE bDriveNumber; // Physical drive number to send
// command to (0,1,2,3).
BYTE bReserved[3]; // Reserved for future expansion.
DWORD dwReserved[4]; // For future use.
BYTE bBuffer[1]; // Input buffer.
} SENDCMDINPARAMS, *PSENDCMDINPARAMS, *LPSENDCMDINPARAMS;
typedef struct _GETVERSIONOUTPARAMS
{
BYTE bVersion; // Binary driver version.
BYTE bRevision; // Binary driver revision.
BYTE bReserved; // Not used.
BYTE bIDEDeviceMap; // Bit map of IDE devices.
DWORD fCapabilities; // Bit mask of driver capabilities.
DWORD dwReserved[4]; // For future use.
} GETVERSIONOUTPARAMS, *PGETVERSIONOUTPARAMS, *LPGETVERSIONOUTPARAMS;
//////////////////////////////////////////////////////////////////////
//结构定义
typedef struct _UNICODE_STRING
{
USHORT Length;//长度
USHORT MaximUMLength;//最大长度
PWSTR Buffer;//缓存指针
} UNICODE_STRING,*PUNICODE_STRING;
typedef struct _OBJECT_ATTRIBUTES
{
ULONG Length;//长度 18h
HANDLE RootDirectory;// 00000000
PUNICODE_STRING ObjectName;//指向对象名的指针
ULONG Attributes;//对象属性00000040h
PVOID SecurityDescriptor; // Points to type SECURITY_DESCRIPTOR，0
PVOID SecurityQualityOfService; // Points to type SECURITY_QUALITY_OF_SERVICE，0
} OBJECT_ATTRIBUTES;
typedef OBJECT_ATTRIBUTES *POBJECT_ATTRIBUTES;
/////////////////
typedef DWORD (__stdcall *ZWOS)(PHANDLE,ACCESS_MASK,POBJECT_ATTRIBUTES);
typedef DWORD (__stdcall *ZWMV)(HANDLE,HANDLE,PVOID,ULONG,ULONG,PLARGE_INTEGER,PSIZE_T,DWORD,ULONG,ULONG);
typedef DWORD (__stdcall *ZWUMV)(HANDLE,PVOID);
BOOL WinNTHDSerialNumAsScsiRead( BYTE* dwSerial, UINT* puSerialLen, UINT uMaxSerialLen )
{
BOOL bInfoLoaded = FALSE;
for( int iController = 0; iController < 2; ++ iController )
{
HANDLE hScsiDriveIOCTL = 0;
char szDriveName[256];
// Try to get a handle to PhysicalDrive IOCTL, report failure
// and exit if can't.
sprintf( szDriveName, "\\\\.\\Scsi%d:", iController );
// Windows NT, Windows 2000, any rights should do
hScsiDriveIOCTL = CreateFile( szDriveName,
GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
OPEN_EXISTING, 0, NULL);
// if (hScsiDriveIOCTL == INVALID_HANDLE_VALUE)
// printf ("Unable to open SCSI controller %d, error code: 0x%lX\n",
// controller, GetLastError ());
if( hScsiDriveIOCTL != INVALID_HANDLE_VALUE )
{
int iDrive = 0;
for( iDrive = 0; iDrive < 2; ++ iDrive )
{
char szBuffer[sizeof( SRB_IO_CONTROL ) + SENDIDLENGTH] = { 0 };
SRB_IO_CONTROL* p = ( SRB_IO_CONTROL* )szBuffer;
SENDCMDINPARAMS* pin = ( SENDCMDINPARAMS* )( szBuffer + sizeof( SRB_IO_CONTROL ) );
DWORD dwResult;
p->HeaderLength = sizeof( SRB_IO_CONTROL );
p->Timeout = 10000;
p->Length = SENDIDLENGTH;
p->ControlCode = IOCTL_SCSI_MINIPORT_IDENTIFY;
strncpy( ( char* )p->Signature, "SCSIDISK", 8 );
pin->irDriveRegs.bCommandReg = IDE_ATA_IDENTIFY;
pin->bDriveNumber = iDrive;
if( DeviceIoControl( hScsiDriveIOCTL, IOCTL_SCSI_MINIPORT,
szBuffer,
sizeof( SRB_IO_CONTROL ) + sizeof( SENDCMDINPARAMS ) - 1,
szBuffer,
sizeof( SRB_IO_CONTROL ) + SENDIDLENGTH,
&dwResult, NULL ) )
{
SENDCMDOUTPARAMS* pOut = ( SENDCMDOUTPARAMS* )( szBuffer + sizeof( SRB_IO_CONTROL ) );
IDSECTOR* pId = ( IDSECTOR* )( pOut->bBuffer );
if( pId->sModelNumber[0] )
{
if( * puSerialLen + 20U <= uMaxSerialLen )
{
// 序列号
CopyMemory( dwSerial + * puSerialLen, ( ( USHORT* )pId ) + 10, 20 );
// Cut off the trailing blanks
for( UINT i = 20; i != 0U && ' ' == dwSerial[* puSerialLen + i - 1]; -- i )
{}
* puSerialLen += i;
// 型号
CopyMemory( dwSerial + * puSerialLen, ( ( USHORT* )pId ) + 27, 40 );
// Cut off the trailing blanks
for( i = 40; i != 0U && ' ' == dwSerial[* puSerialLen + i - 1]; -- i )
{}
* puSerialLen += i;
bInfoLoaded = TRUE;
}
else
{
::CloseHandle( hScsiDriveIOCTL );
return bInfoLoaded;
}
}
}
}
::CloseHandle( hScsiDriveIOCTL );
}
}
return bInfoLoaded;
}
BOOL DoIdentify( HANDLE hPhysicalDriveIOCTL, PSENDCMDINPARAMS pSCIP,
PSENDCMDOUTPARAMS pSCOP, BYTE bIDCmd, BYTE bDriveNum,
PDWORD lpcbBytesReturned )
{
// Set up data structures for IDENTIFY command.
pSCIP->cBufferSize = IDENTIFY_BUFFER_SIZE;
pSCIP->irDriveRegs.bFeaturesReg = 0;
pSCIP->irDriveRegs.bSectorCountReg = 1;
pSCIP->irDriveRegs.bSectorNumberReg = 1;
pSCIP->irDriveRegs.bCylLowReg = 0;
pSCIP->irDriveRegs.bCylHighReg = 0;
// calc the drive number.
pSCIP->irDriveRegs.bDriveHeadReg = 0xA0 | ( ( bDriveNum & 1 ) << 4 );
// The command can either be IDE identify or ATAPI identify.
pSCIP->irDriveRegs.bCommandReg = bIDCmd;
pSCIP->bDriveNumber = bDriveNum;
pSCIP->cBufferSize = IDENTIFY_BUFFER_SIZE;
return DeviceIoControl( hPhysicalDriveIOCTL, DFP_RECEIVE_DRIVE_DATA,
( LPVOID ) pSCIP,
sizeof( SENDCMDINPARAMS ) - 1,
( LPVOID ) pSCOP,
sizeof( SENDCMDOUTPARAMS ) + IDENTIFY_BUFFER_SIZE - 1,
lpcbBytesReturned, NULL );
}
BOOL WinNTHDSerialNumASPhysicalRead( BYTE* dwSerial, UINT* puSerialLen, UINT uMaxSerialLen )
{
#define DFP_GET_VERSION 0x00074080
BOOL bInfoLoaded = FALSE;
for( UINT uDrive = 0; uDrive < 4; ++ uDrive )
{
HANDLE hPhysicalDriveIOCTL = 0;
// Try to get a handle to PhysicalDrive IOCTL, report failure
// and exit if can't.
char szDriveName [256];
sprintf( szDriveName, "\\\\.\\PhysicalDrive%d", uDrive );
// Windows NT, Windows 2000, must have admin rights
hPhysicalDriveIOCTL = CreateFile( szDriveName,
GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE, NULL,
OPEN_EXISTING, 0, NULL);
if( hPhysicalDriveIOCTL != INVALID_HANDLE_VALUE )
{
GETVERSIONOUTPARAMS VersionParams = { 0 };
DWORD cbBytesReturned = 0;
// Get the version, etc of PhysicalDrive IOCTL
if( DeviceIoControl( hPhysicalDriveIOCTL, DFP_GET_VERSION,
NULL,
0,
&VersionParams,
sizeof( GETVERSIONOUTPARAMS ),
&cbBytesReturned, NULL ) )
{
// If there is a IDE device at number "i" issue commands
// to the device
if( VersionParams.bIDEDeviceMap != 0 )
{
BYTE bIDCmd = 0; // IDE or ATAPI IDENTIFY cmd
SENDCMDINPARAMS scip = { 0 };
// Now, get the ID sector for all IDE devices in the system.
// If the device is ATAPI use the IDE_ATAPI_IDENTIFY command,
// otherwise use the IDE_ATA_IDENTIFY command
bIDCmd = ( VersionParams.bIDEDeviceMap >> uDrive & 0x10 ) ? IDE_ATAPI_IDENTIFY : IDE_ATA_IDENTIFY;
BYTE IdOutCmd[sizeof( SENDCMDOUTPARAMS ) + IDENTIFY_BUFFER_SIZE - 1] = { 0 };
if( DoIdentify( hPhysicalDriveIOCTL,
&scip,
( PSENDCMDOUTPARAMS )&IdOutCmd,
( BYTE )bIDCmd,
( BYTE )uDrive,
&cbBytesReturned ) )
{
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -