fdi.h

一个农用车辆管理系统的雏形

 *              FDIIsCabinet(), and make sure the setID matches the one for
 *              the current cabinet specified in the fdintCABINET_INFO, and
 *              that the disk number is one greater.
 *
 *              NOTE: FDI will continue to call fdintNEXT_CABINET until it
 *                    gets the cabinet it wants, or until you return -1
 *                    to abort the FDICopy() call.
 *
 *      The documentation below on the FDI error codes provides explicit
 *      guidance on how to avoid each error.
 *
 *      If you find you must return a failure to FDI from one of your
 *      callback functions, then FDICopy() frees all resources it allocated
 *      and closes all files.  If you can figure out how to overcome the
 *      problem, you can call FDICopy() again on the last cabinet, and
 *      skip any files that you already copied.  But, note that FDI does
 *      *not* maintain any state between FDICopy() calls, other than possibly
 *      memory allocated for the decompressor.
 *
 *      See FDIERROR for details on FDI error codes and recommended actions.
 *
 *
 *  Progress Indicator Suggestions:
 *      As above, all of the file I/O functions are supplied by you.  So,
 *      updating a progress indicator is very simple.  You keep track of
 *      the target files handles you have opened, along with the uncompressed
 *      size of the target file.  When you see writes to the handle of a
 *      target file, you use the write count to update your status!
 *      Since this method is available, there is no separate callback from
 *      FDI just for progess indication.
 */

#ifndef INCLUDED_FDI
#define INCLUDED_FDI    1

//** Specify structure packing explicitly for clients of FDI
#pragma pack(4)


/***    FDIERROR - Error codes returned in erf.erfOper field
 *
 *  In general, FDI will only fail if one of the passed in memory or
 *  file I/O functions fails.  Other errors are pretty unlikely, and are
 *  caused by corrupted cabinet files, passing in a file which is not a
 *  cabinet file, or cabinet files out of order.
 *
 *  Description:    Summary of error.
 *  Cause:          List of possible causes of this error.
 *  Response:       How client might respond to this error, or avoid it in
 *                  the first place.
 */
typedef enum {
    FDIERROR_NONE,
        // Description: No error
        // Cause:       Function was successfull.
        // Response:    Keep going!

    FDIERROR_CABINET_NOT_FOUND,
        // Description: Cabinet not found
        // Cause:       Bad file name or path passed to FDICopy(), or returned
        //              to fdintNEXT_CABINET.
        // Response:    To prevent this error, validate the existence of the
        //              the cabinet *before* passing the path to FDI.

    FDIERROR_NOT_A_CABINET,
        // Description: Cabinet file does not have the correct format
        // Cause:       File passed to to FDICopy(), or returned to
        //              fdintNEXT_CABINET, is too small to be a cabinet file,
        //              or does not have the cabinet signature in its first
        //              four bytes.
        // Response:    To prevent this error, call FDIIsCabinet() to check a
        //              cabinet before calling FDICopy() or returning the
        //              cabinet path to fdintNEXT_CABINET.

    FDIERROR_UNKNOWN_CABINET_VERSION,
        // Description: Cabinet file has an unknown version number.
        // Cause:       File passed to to FDICopy(), or returned to
        //              fdintNEXT_CABINET, has what looks like a cabinet file
        //              header, but the version of the cabinet file format
        //              is not one understood by this version of FDI.  The
        //              erf.erfType field is filled in with the version number
        //              found in the cabinet file.
        // Response:    To prevent this error, call FDIIsCabinet() to check a
        //              cabinet before calling FDICopy() or returning the
        //              cabinet path to fdintNEXT_CABINET.

    FDIERROR_CORRUPT_CABINET,
        // Description: Cabinet file is corrupt
        // Cause:       FDI returns this error any time it finds a problem
        //              with the logical format of a cabinet file, and any
        //              time one of the passed-in file I/O calls fails when
        //              operating on a cabinet (PFNOPEN, PFNSEEK, PFNREAD,
        //              or PFNCLOSE).  The client can distinguish these two
        //              cases based upon whether the last file I/O call
        //              failed or not.
        // Response:    Assuming this is not a real corruption problem in
        //              a cabinet file, the file I/O functions could attempt
        //              to do retries on failure (for example, if there is a
        //              temporary network connection problem).  If this does
        //              not work, and the file I/O call has to fail, then the
        //              FDI client will have to clean up and call the
        //              FDICopy() function again.

    FDIERROR_ALLOC_FAIL,
        // Description: Could not allocate enough memory
        // Cause:       FDI tried to allocate memory with the PFNALLOC
        //              function, but it failed.
        // Response:    If possible, PFNALLOC should take whatever steps
        //              are possible to allocate the memory requested.  If
        //              memory is not immediately available, it might post a
        //              dialog asking the user to free memory, for example.
        //              Note that the bulk of FDI's memory allocations are
        //              made at FDICreate() time and when the first cabinet
        //              file is opened during FDICopy().

    FDIERROR_BAD_COMPR_TYPE,
        // Description: Unknown compression type in a cabinet folder
        // Cause:       [Should never happen.]  A folder in a cabinet has an
        //              unknown compression type.  This is probably caused by
        //              a mismatch between the version of FCI.LIB used to
        //              create the cabinet and the FDI.LIB used to read the
        //              cabinet.
        // Response:    Abort.

    FDIERROR_MDI_FAIL,
        // Description: Failure decompressing data from a cabinet file
        // Cause:       The decompressor found an error in the data coming
        //              from the file cabinet.  The cabinet file was corrupted.
        //              [11-Apr-1994 bens When checksuming is turned on, this
        //              error should never occur.]
        // Response:    Probably should abort; only other choice is to cleanup
        //              and call FDICopy() again, and hope there was some
        //              intermittent data error that will not reoccur.

    FDIERROR_TARGET_FILE,
        // Description: Failure writing to target file
        // Cause:       FDI returns this error any time it gets an error back
        //              from one of the passed-in file I/O calls fails when
        //              writing to a file being extracted from a cabinet.
        // Response:    To avoid or minimize this error, the file I/O functions
        //              could attempt to avoid failing.  A common cause might
        //              be disk full -- in this case, the PFNWRITE function
        //              could have a check for free space, and put up a dialog
        //              asking the user to free some disk space.

    FDIERROR_RESERVE_MISMATCH,
        // Description: Cabinets in a set do not have the same RESERVE sizes
        // Cause:       [Should never happen]. FDI requires that the sizes of
        //              the per-cabinet, per-folder, and per-data block
        //              RESERVE sections be consistent across all the cabinets
        //              in a set.
        // Response:    Abort.

    FDIERROR_WRONG_CABINET,
        // Description: Cabinet returned on fdintNEXT_CABINET is incorrect
        // Cause:       NOTE: THIS ERROR IS NEVER RETURNED BY FDICopy()!
        //              Rather, FDICopy() keeps calling the fdintNEXT_CABINET
        //              callback until either the correct cabinet is specified,
        //              or you return ABORT.
        //              When FDICopy() is extracting a file that crosses a
        //              cabinet boundary, it calls fdintNEXT_CABINET to ask
        //              for the path to the next cabinet.  Not being very
        //              trusting, FDI then checks to make sure that the
        //              correct continuation cabinet was supplied!  It does
        //              this by checking the "setID" and "iCabinet" fields
        //              in the cabinet.  When MAKECAB.EXE creates a set of
        //              cabinets, it constructs the "setID" using the sum
        //              of the bytes of all the destination file names in
        //              the cabinet set.  FDI makes sure that the 16-bit
        //              setID of the continuation cabinet matches the
        //              cabinet file just processed.  FDI then checks that
        //              the cabinet number (iCabinet) is one more than the
        //              cabinet number for the cabinet just processed.
        // Response:    You need code in your fdintNEXT_CABINET (see below)
        //              handler to do retries if you get recalled with this
        //              error.  See the sample code (EXTRACT.C) to see how
        //              this should be handled.

    FDIERROR_USER_ABORT,
        // Description: FDI aborted.
        // Cause:       An FDI callback returnd -1 (usually).
        // Response:    Up to client.

} FDIERROR;


/*
 * FAT file attribute flag used by FCI/FDI to indicate that
 * the filename in the CAB is a UTF string
 */
#ifndef _A_NAME_IS_UTF
#define _A_NAME_IS_UTF  0x80
#endif

/*
 * FAT file attribute flag used by FCI/FDI to indicate that
 * the file should be executed after extraction
 */
#ifndef _A_EXEC
#define _A_EXEC         0x40
#endif


/***    HFDI - Handle to an FDI context
 *
 *  FDICreate() creates this, and it must be passed to all other FDI
 *  functions.
 */
typedef void FAR *HFDI; /* hfdi */


/***    FDICABINETINFO - Information about a cabinet
 *
 */
typedef struct {
    long        cbCabinet;              // Total length of cabinet file
    USHORT      cFolders;               // Count of folders in cabinet
    USHORT      cFiles;                 // Count of files in cabinet
    USHORT      setID;                  // Cabinet set ID
    USHORT      iCabinet;               // Cabinet number in set (0 based)
    BOOL        fReserve;               // TRUE => RESERVE present in cabinet
    BOOL        hasprev;                // TRUE => Cabinet is chained prev
    BOOL        hasnext;                // TRUE => Cabinet is chained next
} FDICABINETINFO; /* fdici */
typedef FDICABINETINFO FAR *PFDICABINETINFO; /* pfdici */


/***    FDIDECRYPTTYPE - PFNFDIDECRYPT command types
 *
 */
typedef enum {
    fdidtNEW_CABINET,                   // New cabinet
    fdidtNEW_FOLDER,                    // New folder
    fdidtDECRYPT,                       // Decrypt a data block
} FDIDECRYPTTYPE; /* fdidt */


/***    FDIDECRYPT - Data for PFNFDIDECRYPT function
 *
 */
typedef struct {
    FDIDECRYPTTYPE    fdidt;            // Command type (selects union below)
    void FAR         *pvUser;           // Decryption context
    union {
        struct {                        // fdidtNEW_CABINET
            void FAR *pHeaderReserve;   // RESERVE section from CFHEADER
            USHORT    cbHeaderReserve;  // Size of pHeaderReserve
            USHORT    setID;            // Cabinet set ID
            int       iCabinet;         // Cabinet number in set (0 based)
        } cabinet;

        struct {                        // fdidtNEW_FOLDER
            void FAR *pFolderReserve;   // RESERVE section from CFFOLDER
            USHORT    cbFolderReserve;  // Size of pFolderReserve
            USHORT    iFolder;          // Folder number in cabinet (0 based)
        } folder;

        struct {                        // fdidtDECRYPT
            void FAR *pDataReserve;     // RESERVE section from CFDATA
            USHORT    cbDataReserve;    // Size of pDataReserve
            void FAR *pbData;           // Data buffer
            USHORT    cbData;           // Size of data buffer
            BOOL      fSplit;           // TRUE if this is a split data block
            USHORT    cbPartial;        // 0 if this is not a split block, or
                                        //  the first piece of a split block;
                                        // Greater than 0 if this is the
                                        //  second piece of a split block.
        } decrypt;