lcd12864.c

基于Mini51板的数字示波器设计

#include "lcd12864.h"

unsigned char pointX=32;
unsigned char pointY=32;

void loop_lcd_is_busy(unsigned char right)
{
  unsigned char tmp,counter=0;
  do {
  	if(right) tmp = LCD_RCR;
  	else tmp = LCD_LCR;	
	if(counter++>50) break;//超时跳出
  }
  while ((tmp|0x7f)==0xff);	 
}

void lcd_cmd_wr(unsigned char cmdcode,unsigned char right)
{
  loop_lcd_is_busy(right);
  if(right) LCD_RCW = cmdcode;
  else LCD_LCW = cmdcode;  
}

void lcd_dat_wr(unsigned char ldata,unsigned char right)
{ 
  loop_lcd_is_busy(right);
  if(right) LCD_RDW = ldata;
  else LCD_LDW = ldata;
}

void lcd_clr(void)
{
	unsigned char i,j;
	for(i=0;i<8;i++) {
		lcd_cmd_wr(ORGY+i,0);
		lcd_cmd_wr(ORGX,0);
		lcd_cmd_wr(ORGY+i,1);
		lcd_cmd_wr(ORGX,1);
		for(j=0;j<64;j++) {
			lcd_dat_wr(0,0);
			lcd_dat_wr(0,1);
		}
	}
}

void lcd_init(void)
{
  lcd_cmd_wr(DISPON,0);
  lcd_cmd_wr(DISPFIRST,0);
  lcd_cmd_wr(ORGY,0);
  lcd_cmd_wr(ORGX,0);
  lcd_cmd_wr(DISPON,1);
  lcd_cmd_wr(DISPFIRST,1);
  lcd_cmd_wr(ORGY,1);
  lcd_cmd_wr(ORGX,1);
  lcd_clr();
}

//LCD更新指定列，以列为单位，一次更新1列
void lcd_row_wr(unsigned char x,unsigned char *da)//x是列坐标,*da是8字节列数据
{
	unsigned char j;
	if(x<64) { //根据列坐标选择左右半屏
		for(j=0;j<8;j++) { //写左半屏
			lcd_cmd_wr(ORGY+j,0);
			lcd_cmd_wr(ORGX+x,0);
			lcd_dat_wr(da[j],0);
		}
	}
	else {
		x-=64;//坐标调整
		for(j=0;j<8;j++) { //写右半屏
			lcd_cmd_wr(ORGY+j,1);
			lcd_cmd_wr(ORGX+x,1);
			lcd_dat_wr(da[j],1);
		}		
	}
}


void lcd_disp(unsigned char x,unsigned char y)
{
	unsigned char da[8];
	unsigned char j;
	y = 63-y;
	for(j=1;j<7;j++) da[j] = 0x0;
	{//绘制边框
		da[0]=0x01;
		da[7]=0x80;
			if((x==0)||(x==127)) {
			for(j=0;j<8;j++) da[j] = 0xff;
		}
	}
	
	//绘制由变量pointY控制的水平游标线	
	if(x%5==0) da[pointY>>3] |= 0x01 << (pointY&0x07);

	//绘制由变量pointX控制的垂直游标线
	if(x==pointX) 
		for(j=0;j<64;j++) 
			if(j%5==0) da[j>>3] |= 0x01 <<(j&0x07);	
	//绘制信号波形
	da[y/8] |= 0x01<<(y%8);
  	lcd_row_wr(x,da);
}

//8×n点阵字符写入函数
void lcd_put_xyns(unsigned char x,y,n,unsigned char *s)
{
	unsigned char i;		
	for(i=0;i<n;i++) {
		if((x+i)>63) {
			lcd_cmd_wr(ORGY+y,1);
			lcd_cmd_wr(ORGX+x+i-64,1);
			lcd_dat_wr(s[i],1); 
		}
		else {
			lcd_cmd_wr(ORGY+y,0);
			lcd_cmd_wr(ORGX+x+i,0);
			lcd_dat_wr(s[i],0); 
		}
	}	
}//*/